Joel0201
-
Posts
16 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by Joel0201
-
-
-
Bumpppp
-
Hey guys after some 4x114.3 rims for my 31 prefer dished style meshies, Watanabe kind of cheap let me know
-
I already have both turbos,
the surge tank it due to the shitty design of holdens fuel tanks (in the vl) I don’t want to risk detention when cornering.
I have been leaning towards the 3540.
A lot of the mods are for future proofing the car, I’m restoring it so the fuel tanks out and the intake is off so I figure I don’t ever wanna change shit twice.
Everything ive listed I already have of another build Hahahah so I’m pretty well kitted at my house for rb30s
-
Hey guys I’ve currently got a rb30 and I’m gonna boost it, my build plans are
haltech ps2000
highmount with external gate 45mm
na bottom end
turbo oil pump
have 660cc injectors night go higher like 1500cc
new timing belt and water pump seals (service shit)
arp headstuds
Mls headgasket
wade cam (can’t remeber which one)
head to be clean and polished pep pro racing valves new steams and heavy duty vavle springs
intank walbro 460 runing to a surge tank with twin 044s
Got a 3inch dump pipe
I’m aiming for 300rw kw
For my turbo choice is where I’m stuck I currently have a gtx3076 0.82r and a gt3540 off a xr6 turbo.
Which turbo will get me to 300 with my engine build, will the 3076 make it or will I have to go the 35?
And what kind of safe boost level would I see with the na bottom end on 98 and e85?
-
14 hours ago, wildeagle44 said:
I used to use achilles 123’s then went to kuhmo KU31 or KU36 up front as steer tyres. Ran some china tyres up front over the weekend and they worked great.
No idea about tyre suppliers in vic. I usually ebay mine unless there is a matsuri special on.
Gktech or PBM have some decent gear. You might struggle to find much front end wise for an R31 aside from lock washers/spacers. If i was staying R31 i’d do an s13 front suspension swap.
Cheers mate i have already done the s13 swap
-
Hey guys i have a r31 skyline and i have just started to get into drifting.
I have done one skid pan event with it which i enjoyed.
i have coil overs all round and a locked diff
I need some questions from you guys about general stuff
Ok so i need some Tyre tips:
Wheres a good place where to get a good front Tyre in Vic
and what tires are a good base for a entry level setup, i was thinking the federal 595? im not to sure.
as for the rears where do you guys get your cheaper rear tires?
also where do you guys buy your drift components in Australia like (hydro handbrakes, lock kits and other fun stuff)
-
-
Hi I am looking for a bolt in roll cage and harnesses as well as a hydro hand break for my r31 skyline vic cheers
-
Should have included 4x114.3 ***
My bad
-
10 hours ago, admS15 said:
A workmate of mine has a pair of old school white enkei rs01 17 x 9 i think they're +38 offset, he also has a pair of black rs bros vesta in 17 x 9 also i think +38 both 5 stud 114.3. They're well used but not buckled or anything, have been sitting in his shed for over a decade. If you're interested, make an offer and ill pass it on. Located in s.e suburbs of Melbourne.
Pmd mate
-
11 hours ago, Griffin said:
I've got a set of dgr ones. Can post
Pmd mate
-
Hello im looking for s13 coilovers vic also looking for cheap drifter wheels for a skidpan event
thank you heaps from Joel
-
Hello im looking for s13 coilovers vic also looking for cheap drifter wheels for a skidpan event
thank you heaps from Joel
-
Hey guys I would like to get a manual conversion for a r31 or even a cheap manual car.
Located in melbs
Cheers from joel
Identifying work rims
in General Automotive Discussion
Posted
Thank you heaps mate that’s them