Hick Mick

R32 Nistune remapped and a R33 series 1 loom. I have made another post "End of Build Issues" to better explain the problem.

I am getting to the end of a RB30 VL with a RB25det top end. I used an R32 ECU with a nistune remap. The problem I am having with the rewiring is that I am getting no power to the coils and the injectors, I do get power to the coils if I direct the battery voltage directly through the ignition relay but setup properly - nothing. The fuel pump works Ok. Do the R32 ECUs have any differences in wiring than the wiki instructions for theR33 as I have checked my rewiring and all seems ok. Two connections I have not made and that is to the knock sensors and the vct solenoid. Are these connections needed to make the whole thing work. And does all grounded wiring points on the ECU have to be earthed. Mick

Getting no power to the injectors on a rb25det head on a VL block. What wire/wires do I need to connect to power the injectors. Mick

You beaut. Thanks

What pinout on R32 ecu does the starter signal wire go to.