Jump to content
SAU Community

klys

Members
 View Profile  See their activity

  • Posts

    29

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Posts posted by klys

    RB20DETT TwinTurbo2Litre

    in Forced Induction Performance

    Posted

    which twin scroll would you recommend for an RB20? I've been wanting to do a Twin GT-SS on my 2.2L RB20 .. but I'm starting to wonder if I shouldn't stay clear of the complexity the TT will bring.

    I've seen Twin scroll turbos in subarus.. and I'm guessing an I6 would be a good engine for this type of turbo.

    Thanks

    A friend sugested a Garett GT3076R... I know it's not a TS system but seems to be rated for the power I want .. with an .83 A/R

    Orc Twin Plates

    in Drivetrain and transmission

    Posted

    Can anyone help me?

    I bought an ORC 709D Clutch, I already have an unknown twin plate in there.

    so I have a shorter bearing carrier. I also have an aftermarket NSK bearing(That I had installed last year)

    Will I need to buy a new bearing for this one. What do I need to look for in a bigger slave cylinder? part # please?

    any info is welcome!

    THANKS!

    ORC Twin vs Nismo Twin

    in Drivetrain and transmission

    Posted · Edited by klys

    Sorry for resurecting this very old thread but it's the closest one I could find with alot of relevant info.

    I ordered an ORC 709D twin plate clutch but I haven't received it yet.

    Instructions are suposed included as this is a brand new clutch.

    However I'd like to have all the necessary hardware when the clutch gets here, of course!

    does anyone know of the nissan parts# that I will need? I already had a twin plate clutch(unknow brand)

    but it's now busted. I had new NSK throw out bearing installed last year when I had my tranny replaced.

    I don't know if it had a forged pivot bearing but it did last close to 50 000km. Any info will be greatly appreciated since I need to have everything installed by April 22nd since I have a Lapping Academy Weekend!

    thanks guys :)

    Hks Gtrs Rb20det

    in Forced Induction Performance

    Posted · Edited by klys

    RedDrifter I have

    -440 Injectors

    -Z32 MAF

    -GTR Fuel pump

    -GTR intercooler

    -2.2L Tomei engine Derive I

    I didn't have a boost gauge when the guy ran the dyno so I do not know if it's the boost that drops above 6800.. I'll repost my graph here to help you guys

    dynorun3.jpg

    You can see the A/F leaning around 6800...

    Hks Gtrs Rb20det

    in Forced Induction Performance

    Posted

    Yes i tend to agree, my ECU was tuned by a local tuner. I did ask him to go easy as I want to be on the safe side.. I would however like to go further than 6800RPM my japanese cutoff was set at 8200RPM I still wonder how comme my 400 injectors lean out, or is it the tuning/turbo.. I wanna start downloading ecu .bin soon enough to see how my fuel map is..

    And yeah 94 octane gas is as good as it gets here but I've seen/read that 94 here is about like 98 japanese octane...

    is running that rich leaning out my injectors when I pump the boost up?

    Hks Gtrs Rb20det

    in Forced Induction Performance

    Posted

    I have an HKSGT2535... I think it's rated for 350ps

    isn't the GT2530 rated for 340ps (flywheel or wheel)

    i'm currently at 355 flywheel and I was wondering where I could find a flow map for it or the garett equivalent.

    I'm at 208RWkW .. and seeing some of you guys with up to 250RWkW on GT2530 kinda makes me wonder :D

    if you could look at my dyno sheet in forced induction RB20 mods and tell me what you think might or might not help get a bit more power ..

    I'm running at 15 PSI with a conservative A/F ratio of 11.2

    thanks mates! :no:

    Rb20 Turbo Upgrade, All Dyno Results

    in Forced Induction Performance

    Posted · Edited by klys

    I have a boost controller and I used it at three different levels

    so at 14 PSI:

    wheel crank

    hp 265 335 @6250

    tq 230 285 @5000-6000 Smile

    __________________________

    at 14.5 PSI:

    wheel crank

    hp 270 340 @6500

    tq 240 298 @5000-5750

    ______________________

    at 15 PSI:

    wheel crank

    hp 280 355 @6500 that's 208 RWkW

    tq 260 315 @4750-5500 352 RWNm

    dynorun3.jpg

    Old ass blitz SBC boost controller

    HKS GT2535 turbo

    (N1?) GTR FMIC

    Tomei Built RB20 2.2L with cams and all

    GTR Injectors and Fuel Pump

    3" catless RS*R exhaust

    Z32 MAF

    94 Canadian Octane gas

    the tune is quite rich

    You guys think it's the turbo/cams/injectors that are running out??

    this turbo is rated 350HP which I'm at :S

    R32 Gtst Movies

    in RB Series - R31, R32, R33, R34 (1986-2002)

    Posted · Edited by klys

    Yeah they are indeed hard to find

    haha I have one where my friend launches in front of me... very nice car

    but not special in terms of the video ;)

    http://klys.afraid.org/skylines/_VIDEO/_GT...ty-100_5040.MOV

    All the way from Québec canada :)

    I don't have any videos from mine

    Oh yeah I do, gotta dig it up

    Edit:

    http://klys.afraid.org/skylines/_VIDEO/_GT...lys100_6204.MOV

    http://klys.afraid.org/skylines/_VIDEO/_GT...lys100_6205.MOV

    Cant Enjoy A Decent Cruise Anymore

    in General Automotive Discussion

    Posted

    Well this happens in Canada also... the funniest time was on a 70km/h highway, I was going 100 which is the speed everyone goes on that Highway as 70 is riduculous and everybody knows it...

    anyways so i'm going 100 in 5th gear going by slowy with my GF and there's this VW de-badged golf next to me accelerating decelerating like 3 times ...

    (so being in the left lane) and him driving in the middle lane( cars here are LHD) I finally pull down my window, he ask:" yooo so does this thing fly??!" so I say:"well yeah kinda" ...

    without saying anything else he immediatly floors it to probably 140-150 and zigzags through lite traffic ... I just started laughing as I didn't even accelerate a km/h

    anyways I kinda got scared when I saw him swerve from right lane to left maybe 300m in front .. stoopid ..

    but here in Montreal the skyline is very rare ... we have like 4 in a city of 3 million peaople, so kinda rare and it happens quite often

    R32 GTR Stalling/Cutting out..help

    in General Maintenance

    Posted

    I have a very similar problem

    the car stalls "randomly", especially after I hit bumps.

    monday, I went slowly into gravel, turned the car off, started it, and went about. 15 secs after.. engine died and didn't start again after 5 tries, Fuel pump was priming so that wasn't the prob. I have a recirculation BOV so if it leaks, it goes in behind Z32 MAF. I tried following the wire loom from the connector and it passes right under the A/C oil canister... and the loom was somewhat filled with old oil.

    I will for sure to to follow that cable tonight and make sure everything is secure and undamaged.

    My car is not in limp mode, I can go to redline with no trouble and with quite a bit of power.. if it's not acting up hehe

    I do hear misses at any rpm range... like Highway... at 3000 it will do it but for like 1/2 sec and the engine "starts" back. I will also clean the MAF tonight with electircal contact cleaner

    and verify every air path :P

    Adjustable Camber (Not Bushes)

    in Suspension, braking and tyres

    Posted

    thanks for the replies.

    there is no play at all with the wheel when jacked, I have juste replaced the tie rod ends my self(which explains the bad toe :rant: ) I indeed have tein, but I wouldn't know how to specify height, raising or droping height doesn't affect the camber with this type of suspension I was told.

    I mesured from bottom of blocking ring to under the lip(the straight part at 2 5/8 inches I think.

    anyone have a lentgh on the upper link?? If yours is also 6" long, it means I have another problem :|

    Also ride height on the left side seems... quite lower even though I brought both springs to the exact same level... could the coil be finished? and I don't know the spring rates

    (I got the car like that) hehe :werd:

    Adjustable Camber (Not Bushes)

    in Suspension, braking and tyres

    Posted

    alignement.jpg

    as you can see, I have a bad camber problem can anyone point me to a relatively cheap solution in order to get that camber back to -1 deg.

    I could buy adjustable, but damn 400$+

    thanks for any help

    oh here's a pic of my current set up, someone thought they might be nismo's

    100_5820-1.jpg

    Also what is suposed to be the length?? mine are 6" long :rofl: I'd like longer

×
×
  • Create New...