CuzzyG
-
Posts
2 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by CuzzyG
-
-
Got a R32 rb20det awhile back, was driving around for couple days but started to miss and was very jerky and stalling out so parked it up and decided to sort it. When starting up it sometimes runs for about 5 mins then car will start to miss then eventually die out, and othertimes it starts missing as soon as engine starts up. Have changed Plugs, Coils, MAF, Fuel Pump, ECU(20DET) and TPS. The signal voltage on the tps are completely wrong. Sits 1v to high on closed throttle and only goes to about 3v WOT. Have tried a second hand tps but same sort of results. Power and ground are fine, any help would be appreciated
Video of TPS reading below
RB20DET Misfire issues
in RB Series - R31, R32, R33, R34 (1986-2002)
Posted
Had a look at the cas, seems to be fine but I believe the timing may be off so will be doing that next and will give update when done, so tps signal voltage doesnt matter if it is manual?