Sico04

$21,500 ono I really need to get rid of the GTR, due to the lack of space for tools, bikes...........etc no offer that i see to be reasonable will be refused Will make cheaper for no RWC or REG

Will consider swap with Cash adjustment for almost any type of Station wagon

R32GTR $22,000 ono In Melbourne phone 0401 974 224 Email [email protected] I know its a bit steep for a GTR but Who really wants to give money away........... GTR Details as follows: Excedy extra Heavy duty cushion button clutch with 1000pound pressure plate Trust s/steel front pipes, and hi-flow cat and Apexi power intake panel filter in stock air box all just under 5000km old............. Custom adjustable cam gears by Ice performance Melbourne, new timing belt, service, at 7psi made 162.5kw at all 4 wheels "maztec" running 14psi for the last 2000km car was dyno tuned with 215kw at wheels Nigel from ICE..... All seals changed on injectors and cleaned 2000km ago. GTR also has, 17X9 Work CR emotion rims front and back " Koni adjustable suspension all new springs and bushes in suspension. Brembo breaks front and back from r33 GTR, MOMO race Italy steering wheel, and HKS exhaust. Stereo is Japanese so only picks up jap channels, but has Cd player and aux input for ipod. All work shops have complemented me on how clean and smooth the GTR runs??..no problems with car, had diagnostic done at Nissan through a friend just to check the system all components are 100%. Knock sensors changed 500km ago.......

ok ok i get it my bad i didnt realize they were so f**kin cheap how the f**k was i quoted 4k then..............bahhhhhhh sorry for the stupidity

has any one else had this problem......of trying to find this part? if so did you have any luck with any other silicone 45degree bends? are there any out there "new" that would fit? thanks

i did a bit of searching b4 i advertised and didnt find any thing on a current price for the wheels 6 months ago i called one wheel and tyre retailer and they quoted me just over 4k to buy the same rims same size...etc how bout instead of telling me how im asking too much if any one is interested in these rims PM me with a price they are willing to pay...........

hey all im after one join of piping from an 89 32 GTR that comes off the "twinturbo" alloy pipe.........the one that runs under the air box pic below if any one has one call me on 0401 974 224 ask for Romeo thanks

$3000 Ish ?? willing to swap with cash Adjustment for old school Mazda with series 4-5 13b turbo motor............. what are my chances?

Im selling my work cr emotion wheels, im in Victoria All wheels have no gutter rash and are in perfect condition Pearl bronze...."a little dirty though" Still have most stickers that came with them, but not on wheels Tires are approx 70-80% tread.......im no tire person though The wheels have been on a R32gtr Im after offers around the $3500 The wheels have a separate insurance on them and are insured for a value of $4500 Any one interested email me on [email protected]

Im currently after the rubber pipe that joins from the "Twinturbo" sign in the R32gtr to the intercooler on the side just under the air box i went to nissan and they said that i would have to buy the metal tube as well as the rubber please contact me if you konw what im talkin bout if not ill post pics im in Victoria

ok now i have been told that this is not possible. i have to loop the wastegates together and run a T piece from the center of them to the top of the rear turbo?? how fiddily is this to actually do??

so i have one pipe going to the bottom right of the stock boost solunoid one to the bottom..........can i plug these hoses into the controller??? thanks

can i just f**k off the stock boost solunoid and put the controller there?? i have already had the restrictor taken out will that make a difference i have looked throug the 47 page post and the question was asked but not answered thanks

just got some redline lightweight shock proof comes in 3.75l i probably lost 200ml should i buy another 1l and top the f**ker up gearbox feels like new again though no crunching

hey ive been looking every where for the gearbox oil capacity for my 32gtr cant find it any where im bout to fill it with redline shockproof but dont want to buy 2 bottles if its a 5l box help thanks

ohh and it looks like the car used to run a Pfc as there is yellow wiring on the AFM's and one of the wires has no wear to go so its just not connected

had it run on the dyno at maztech......couldnt find any problems with it in limp home mode it made 162kw at all 4 wheels.......boost droped down to 7-8psi they think it could be the fact that i had the stock boost restrictor taken out of the line and the boost solenoid cant handle the boost........all mixtures are fine...........so WTF..........i swaped itwith another gtr and same thing happens could it be i need to use a boost controller ???

sorry i knew it was limp but for some reason loop keeps comming out its happening lower in the rev range comes on between 2-3k when going up a hill

thanks alot guys

this is my second post about this problem with my car i have had no luck in finding the problem or having some one to find the problem..........its really annoying if the car is under a little bit of load in a lower gear and i put my foot down and let the boost build up it will hit max boost then go into loop home mode y?? i have had the car at nissan for a diagnostic.........nothing all levels are normal when the car is running good and in loop home mode i have checked all the cooler pipes all tight this was happening b4 i had my car modified.........now that it is modded its still doing it even after being tuned on a dyno any one have any experience with finding what it could be ??? its now booked in at maztech for them to give it a go over......... i feel like this problem has beaten me

after a front bumper for r32gtr 89 model if that makes a difference at all must be gun metal grey and would prefer if seller was in Melbourne pm me if any one has any thing thanks

sorry i didnt know i dont usally post things for sale my bad could some one shut this post down then?

this post is for a friend all his items are here pm me if any one is interested in a private sale http://cgi.ebay.com.au/Car-Audio-Subs-Amps...1QQcmdZViewItem

both those setups look good as........as long as they do the trick if any one out there is gonna start producing a few of these things in either carbon fiber or alloy put me down for one that covers apexi filters im too lazy to make one my self........ turned into quite a good little thread

just wondering if any sheet metal workers or metal fabrication guys out there have come up with a metal/ aluminum insulated air box or any thing for a 32 gtr running apexi/hks pods?? if any one has made one or some could you send pics or designs........i was looking at haveing a stainless steel one made up with a sealed hinged door on the top thanks for any info