[Ebay Greddy Manifolds - Tb?]

just go to a place that can machine/fabricate u an adaptor, costs around $30-50 for a custom one, just give them all plenum and ur t/b and it shouldnt be too hard to make

[Aac Valve And Greddy Style Plenum?]

can any1 who's installed one of these copies, please comment on how the installation went? and whether there was much power gained?

[Whats Your Occupation]

industrial & commercial electritian

[Dose Pipe]

farrkkk..... i cant believe how cut some of u guys get over dosing. lol

if some1 wants to do it 2 there car let em, no point moking them, rb sandy was asking for help, not 2 be moked at...

its his car, not yours! so he can do woteva he wants to it

R33HVN - gettin a bit racist there, im offended, not all of us so called 'wogs' have the dose on there cars, i dont and either 2 heaps of my friends

[Wheels Or Gofast Parts?]

engine mods 1st, its gota have go be4 show

[G-tech Performance Meter]

i had 1 about 2 years ago, and seemed very accurate, but not 100% of course

[Air Box Setup]

i made a box myself, used about 4mm thick pvc plastic sheet i got from a plastics shop, made all the bends with a heat gun, and plastic welded the corner joints..

as for piping just cut out the hole with jigsaw, and for cold air hav a pipe from my front bar going in2 the bottom of the box

all up cost me $7.50 for the plastic sheet and $8 for black spray can so it looks legit

heres a pic:

[Flutter Noise, How Do I Get It?]

re-mount you AFM onto your intercooler intake pipe and then run a straight pipe straight off the turbo... size and length od intercooler pipng will determine the noise you get

Also the shape of the pipe that comes off your tubo will give you different sounds

exactly right, done it to my r33 and sound exactly like a vl, dont bother pulling off vaccum hose or blocking off bov, do exactlty like this dood described

[Post Up Your R33!]

heres mine, bit jacked up but will slam it once 275's on the ass go bald

[Got A New Clutch Installed]

same here, only sometimes tho yeh? feels like its got axel tramP??

wouldnt mind also knowing if its normal or not

[Installng Turbotech Boost Control]

my boost is at 10psi n spikes to 12psi after 5500rpm

[(sa) R33 Parts]

got a feul sender by any chance?? pm please

[Wrecking R33 Gtst S2]

got a fuel sender by any chance? pm please

[Installng Turbotech Boost Control]

i recently installed a turbotech boost controller n ripped out the old solenoid, just used the tube off the turbo and the 1 going in2 the cooler piping....

as for the boost gauge, i d/c the 1 in the cluster (its goes to the plenum), the 2 power cables, 1 u earth and other i just tapped into the accessories on my ciggy lighter

tip: may want to get ur boost controller on first n make sure it runs right be4 u install the boost controller (just so u dont overboost it)

hope that helps

[Wtb: Fuel Float And Sender]

bump....

[Clutch Help And Advice - What To Do?]

whats it cost roughly for installation?? just fryed mine @ calder park last night

VLT-025 : where bouts u get that price from?

[Wtb: Fuel Float And Sender]

bump

[Feul Gauge (standard One)]

if i have an aftermarket pump (i do but not sure which brand), will the float and sender be different to the standard one or the same???

[Wtb: Autometer Water Temp Gauge]

hi all,

after a used autometer water temp gauge, sport comp, must have black face please, can pickup from melbourne, cheers

Mark

[Fs: R33 Standard Dump Pipe]

hi all,

selling standard r33 dump pipe, no cracks or leaks, was working fine, selling due to upgrade, can pick-up in geelong or post can be organised at buyers expense, taking offers..

cheers.

[Wtb: Fuel Float And Sender]

hi,

after a fuel float and sender to suit r33 gts-t, vic sellers only, for pick up, cheers

Mark

[The Real Fix For Dodgy Coils (misfire At High Rpm)]

just had a look at mine a while ago and it looks metal as well. unless the actual 'metal' is junk and once cleaned it comes up with the copper look.

i did clean it with a dremel slightly, is ur's a s2 motor?(maybe i got a s2 motor, i duno) can any1 else answer this?

[Boost Controller]

sorry, just got 1 a few days ago thanks neways

[Feul Gauge (standard One)]

if i have an aftermarket pump (i do but not sure which brand), will the float and sender be different to the standard one or the same???

[The Real Fix For Dodgy Coils (misfire At High Rpm)]

are they all made from copper?? coz im fairly (not 100%) that mine were like metal or iron (some silver metal) and not copper, i got a s1 R33 gtst

definately give that a go, they looked like crap in ur 1st pic, good work