Canadian 32

So you are just planning on covering the rust? if that's what you want to do it may not be the best solution, because the rust will just eventually move further outwards and begin showing again. My advice is just take it to a body shop and get it fixed and some of that undercover stuff that prevents rust resrayed under the car and in the wheel wells. or you could buy a widebody kit.

So I pretty much just wanted to ask if it is possible to mount an rb26dett intake plenum on an Rb20det successfully? If so what is needed to be done? Any kind of response would be greatly appreciated. Thank you very much.

What you can do is fill your tank, record how many kilometers you have gone before you fill up again (use the odometer thing) I usually use 60 or 100km and take note of how many litres it takes to fill the tank at that 60 or 100km mark. So say 100km ended up taking 19L, then divide the size of your tank by the 19L, and then take that number and mulyiply it by 100 and you will get a number that is near the amount of kilometers you would get to a tank. sorry if any of that is worded wierd, it's 3am where I am.

Thanks a ton for all the replies. I took a look at the 02 and I am thinking it's on its way out so I am just going to replace it I think.

So Since I got my car I have only been getting about 250-300 km to a tank. Which is really bad and I cant figure out why, since I am shifting around 3500rpm and "took the lead out of my foot". My car doesn't have any engine upgrades beside splitfires, plugs, ssqv, intake. And yes I checked there is not a hole in the tank. Although the car does have a mines tuned ecu in it; so I am thinking that this may be what is causing this bad fuel economy since the car does seem to be running 8-9psi as well. I am in the middle of replacing a bunch of parts, a couple being a power fc and a new fuel pump. so I will have my fingers crossed that that might fix the problem. If anyone has any idea could you please post something. thank you very much for your time.

What I meant was what is the difference? is it noticeable? and so on

What do you mean high flows? sorry im new to skylines.

So I am planning to upgrade the turbo in my gts-t. Although I can't decide which of the three HKS turbos would be better. I want something that is bolt-on and doesnt require a lot of work. My target is between 300 and 350 hp. I have a fmic on the way, PFC, splitfires, new plugs, intake, exhaust, gtr injectors on the way (with resistor pack), and a new fuel pump when i can find one that is close. Any other suggestions for supporting upgrades? I have been told the 2530 and 2535 are direct bolt on, though I know the 35 has a t25 flange rather than a t3 like the 30 and 40. I have also been told I will need to get an 02 housing as well. If anyone could post their experiences with each turbo it would also be greatly appreciated. thank you very much Adam

As the title says, I am in need of a fmic. I have looked around and cant find any reviews/opinions on any. The spec-m looks decent since all I plan to get my rb20 gts-t to is between 300-350 hp. so any advice on this fmic or any oher would be great. thank you very much.

Stock spoiler or NO wing! There's always someone who will buy this stuff if you sell it.

I am going to be getting parts of my engine(rb20) powder coated in the near future. I was thinking rocker covers, coil cover, cam cover and so on. But I cannot decide what colors. So could you please post some pictures of what you have done. I am open to any colors and anything that you have painted not specifically what I just mentioned. Thank you very much

Ok, to start off a friend of mine says he can get a NEO engine in Vancouver, BC through someone he knows. I just wanted to ask if anyone in this forum has ever swapped one into a gts-t or happens to know if it is possible as well as what is involved. Also what price range would one of these engines normally be in? Thank you and I hope to get some feed back. have a good one

Ok, so at the moment the body kit that I have is cracked to hell and needs replacing. I am wanting to stay with my current rims and I am also planning on getting the paint touched up(staying black no matter what). so here is a couple current pictures: I have seena couple that I am liking quite a bit. and could people also tell me what brand kits are on these following cars. thanks, example: remix's setup Sexual 300's setup is awesome as well Also looking good.. So if anyone could please post their suggestions that would be great. thank you