Jump to content
SAU Community

jimmytim

Members
  • Posts

    175
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by jimmytim

  1. Okay....

    Bring a piece of wire or paper clip and a torch with you.

    http://pinoutsguide.com/CarElectronics/nis...ag_pinout.shtml

    While the car is off, jump pin 4 and pin 8 on the consult port (under the interior fuse box), turn ignition to on (do not start engine)

    The abs light should start flashing with error codes.

    ABS CODES

    Code No. Malfunctioning Part Reference Page

    12 Self-diagnosis could not detect any malfunctions.

    45 Actuator front left outlet solenoid valve

    46 Actuator front left inlet solenoid valve

    41 Actuator front right outlet solenoid valve

    42 Actuator front right inlet solenoid valve

    51 Actuator rear right outlet solenoid valve

    52 Actuator rear right inlet solenoid valve

    55 Actuator rear left outlet solenoid valve

    56 Actuator rear left inlet solenoid valve

    25 *1 Front left sensor (open-circuit)

    26 *1 Front left sensor (short-circuit)

    21 *1 Front right sensor (open-circuit)

    22 *1 Front right sensor (short-circuit)

    31 *1 Rear right sensor (open-circuit)

    32 *1 Rear right sensor (short-circuit)

    35 *1 Rear left sensor (open-circuit)

    36 *1 Rear left sensor (short-circuit)

    18 *1 Sensor rotor

    61 *3 Actuator motor or motor relay

    63 Solenoid valve relay

    57 *2 Power supply (Low voltage)

    71 Control unit

    Now write down the codes with a pen, then clear the fault codes

    Disconnect the check terminal from ground (ABS warning lamp

    will stay lit).

    Within 12.5 seconds, ground the check terminal three times.

    Each terminal ground must last more than 1 second. The ABS

    warning lamp goes out after the erase operation has been completed.

    Turn ignition to off, remove the wire/paper clip, then start the car & go for a drive.

    If abs lights up again, do the same to check the code.

  2. I've tried V-Power Racing last year sometime...

    You start the car in the morning...the idle just drop to around 500rpm as in wants to die, then it rev's itself...

    Use 98ron again, starts normal everytime.

    Didn't notice any difference at all.

  3. Sadly I can't watch it on my computer... ...and it doesn't let me copy it on here either...

    It's region 2 coded...

    I'd love to get a copy (provided we're not breaking any laws)

    BTW, all you need is DVD shrink (this rips it to the hdd and region free the disc)

×
×
  • Create New...