gts-t 32

This is still for sale guys. As above still 10K for the short block. But you could buy the lot and sell what you don't need. The block costed totally imports 10K, so you really getting everything else for $1000

i have these for sale on the sunshine coast can post. all so have one r32 4 door tail light

It was built for a customer that never paid for it.

PHOTOS

PHOTOS

All items are located on the sunshine coast will post at buyer’s expense

will take 11K

Subaru STI seats driver and passenger (will need a clean) 2x slight rips in passenger seat less than 5mm $250 for both Subaru STI drive shaft x2 $150each Subaru WRX manual drive shaft x? $130 each Nissan skyline r33 series 2 headlights left hand passenger x2 $200 each 1991 Toyota Soarer Jz230 taillights left & right $60 each Subaru STI gc8 left and right hand indicators $40 both Nissan 300zx Nismo vg30DE plate clutch (twin??) $500 Subaru STI gc8 front sway bar (maybe??) $100 Nissan skyline r33 auto turbo cluster x2, 191896 $50, 53696 $90 Nissan skyline r34 auto turbo cluster x1, ???kms $90 Nissan skyline 300zx cluster manual x2 144411, 9848 Mazda rx7 series 4-5 taillights $70each Mazda rx7 series 5 taillights (cracks in drivers side) $70 both Mazda rx7 series 6 complete rear taillights and garnish (crack in garnish) &200 for all Toyota Jzx90 L & R taillights $80each Toyota AE11 levin L & R taillights 80each Nissan S14 headlights (left and right) $60 each Nissan 300zx headlights (left and 2x right) $100 each Nissan skyline r32 taillights $60 each Nissan S14 taillights x 6 $60 each Nissan S13 taillights (left and right) @70 each Nissan S14 Indicators (2x left, 1x right) $30 each Nissan z32 200zx 2x left tail lights $50 each Nissan z32 300zx 2x centre garnish $80 each Nissan 180sx taillights 2x left, 2x right $70 Nissan 180sx centre garnish x3 $80 Nissan skyline r33 front bumper lights $40 each Nissan skyline r33 taillights 2x left, 2x right $50 each Mazda rx7 suspension set $300 Nissan skyline r33 rear coilovers and aftermarket fronts $300 Mazda rx7 strut braces rear and front $80 each Mazda rx7 body braces series 4/5 $200 Nissan skyline r32 strut braces (front) $60 each Nissan skyline r34 strut braces front $70 Toyota Jzx90 strut brace?? Unknown strut brace (front & back)?? Gtr?? Nissan skyline GTR centre gage cluster $60 Nissan 300ZX aluminum bonnet small dints $120 R32 gts-t bonnet cut to look look like a gtr one $100 I have photos of everthing and will up load tonight, Please PM me for more details

bump

this has been a good read as im about to turbo my wife’s r32 as she is now off her P's

Reasonable offers will be considered

Photos

New Fully built 26/30 $15K ono Bottom end was built by Mercury Motor Sport Build includes: Block has been modified for a sump adapter, decked, bored & line bored, mains have been modified for GTR bearings. Arp main studs Arp head studs Oil galleries have been modified and grub screwed Crank has been lightened, balanced and grub screwed Spool rods Arias ceramic coated pistons ACL race bearings Nitto high flow pump 7L custom sump N1 water pump and pulley Ati super damper and pully Comectic head gasket Tial 44 wastgate Mrturbo t79 biller 6 boost manifold ceramic coated and heat wrapped 1000cc rotchester injectors Twin entry fuel rail and fittings Rb26 fully serviced head I have up loaded this add on behalf off totally imports in kunda park QLD If you have question please pm me and I will find out

Shotgun the gt30 housing for 220 PMed

Hey guys want to buy a GT3076r or GT3037s exhaust housing .82 T3 with 4 bolt exhaust. Will pay $350+postage. 0420 966 722

Yip I’m sure your right about that one. I would say it hits by about half a mill all round. Thanks for your help guys.

Ok I would have thought one size fits all gt3076's as this is a second hand housing

Cause it had a sonic internal low mount housing on it and I am changing it to high mount setup

Ok so I have a gt3037s 56t same as a gt3076r turbo and I just brought a exhaust t3 .82 housing but it wont fit over the exhaust wheel. This housing came off a gt3076 turbo and I don't know why it doesn't fit can anyone help

Thinks for your input guys much appreciated

How much for housing

photos

Yes you guys are right, its a Sonic. The first week it was on it was great then I had to take it off and sent it back to sonic as the sleeve for the gate had come lose and wouldn't allow the internal gate to close. I still don’t think it is right and that’s why I want to get rid of it The only other thing that could be letting it down is the monster performance intercooler brought of a mate a long time ago I’ve been meaning to upgrade it. Yes I have tried preloading the wastegate more. All other parts are good quality Sard 550 injectors Genuine greddy intake manifold AVCR nismo fuel pressure regulator splitfire coil packs z32 AMF with steel intake to turbo Power FC And a walbro fuel pump Pits dyno is known for low HP readings but he is very good with Power FC http://www.skylinesaustralia.com/forums/topic/127439-pitsmatty-spry-dyno/

The tune was done at pits The intake man was put on after the tune but had boost issues before that First turbo setup was with an apexi AX53B70 made 292HP hit 18 psi at 3500rpm then droped back to 14psi at 8000rpm so when the GT3076r when on and made about 40hp more i thought i was doing ok and yes 550cc injectiors fuel reg and fuel pump done with a Z32 AFM

So I have an RB25 S2 with a GT3076r low mount at the moment. I’m looking at changing it to high mount setup. Was look to get some feedback on what exhaust housing size I should go eg: .73 or .82 Current setup made 18psi at 4000rpm making a max HP of 330 when it was first tune. Now the internal gate is giving me the shits and doesn’t make 18psi until 5500. I’m not wanting too much lag and will be happy if I get 18psi at 4000rpm once again on the high mount setup. Supporting mods will be: Greedy intake man Front mount Split fires Power fc 3.5 inch exhaust 38mm external gate I have looked through the Forms to try and find this information but no luck