-
Posts
734 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by 4drftn
-
-
-
i was wondering has anyone removed the fuse box that is located under the dash or somehow got access to the wiring that comes directly out of the back of it?
it looks to me as if the complete dash will have to come out, hopefully someone can come up with an easier solution to getting access to the back of the fuse box.
cheers
-
i have the same problem at the moment, the picture doesnt work anymore, but do you need to remove the plastic mesh cover under the wipers?, or just check the gromets on the firewall in the engine bay where the wiring passes through the firewall into the cabin?
-
yeah have it posted on there and proutes too. still no luck...
-
may consider a T5 in reasonable condition or needing minor repairs
-
hey, do you still have them? and do they have the plugs with reasonable wire coming out?
-
instead of getting a new clutch setup, look into just beefing the springs up in the setup you have, for my VS ute i have an xtreme clutch setup and 10.5" organic plate with the springs beefed up and its rated at clamping 400+hp, but no doubt you can get high clamp springs to handle higher, could work out cheaper than getting a new setup.
-
you should be able to ring them and ask what the part no. is to suit a R33 series 1 or 2 with rb25, 26 or other. If there is different variations in the bolts, let them know what type you have tried which should get you closer to finding the one that will suit...
are the other 4 bolts out of an rb25 or an rb engine?
-
vmx 80 works fine, with a tube of g70. have had no problems with it, and its reasonably priced.
-
will possibly consider a full getrag setup out of a VT 5.0...
-
hey, what type are the wheels, and what are the specs on them? offset, width etc.
any pics?
cheers
-
-
hey mate, do you still have these up for sale?
-
pm sent
-
do they come with wheel nuts?
cheers
-
are these still for sale?
-
is it an arrow frame? do you know what model it is (AX8,AX5 etc.). it should have it stamped on the frame near the nose or near the bottom of the plasitic that covers the steering shaft, possibly underneath on the arrow karts. cheers
-
do you know what sort of motor you need for it? or where to get one to pop straight in? cheers
-
as stated need a T5 for my VS ute, only thing is it has to be out of a VN (split leg box) to suit my bellhousing.
unless someone has a t5 out of any other model and has bellhousing to suit, i will consider it.
cheers
4drftn
-
if you cant get your hands on a good second hand one, a billet aluminium radiator would be close to the cost of a new one, the billet ones will be more efficiant too.
-
what size are the front and back tyre sizes?
245/35 front? 255/35 rear?
and will they clear the brakes on a r33 gts-t without the spacers?
cheers
-
are these still avaliable?
-
i hate when stuff like this happens, is it paint? looks kind of like powder...
-
:laughing-smiley-014:
R33 - Remove Fuse Box From Under The Dash
in General Maintenance
Posted
had another look at it and it looks as if i can take the 2 bolts out that hold the fuse box sercure, but will it give me enough room to move it towards me to access the wiring behind it? or would i have to remove the bottom end of the dash anyways?