scissored sil

bump

Haha, wasn't the dump, was just the gasket which has since been replaced. Should also mention that the car hasn't been driven since january 2009 due to all the upgrades that started happening to it. Basically a fresh batch of oil and she'd be good to go.

$4300 for the straight engine, not including the twin plate clutch.

Hey all, Decided to put up the spare rb26 for sale. Its currently sitting downstairs seeing as the new engine is going into the gtr in the coming weeks. Its standard as. I managed to get a 12.4 out of it at willowbank. I'll chuck in the nismo gmax twin plate clutch that came with it. As I said only reason its out is because I decided to go stupid and build a full new engine. At the moment it also has a sump converted for just rwd, as I was going to put it into my S13 but have since decided against this. Price: $5000 ONO?? location: brissie. contact: nick on 0421 933 613 or [email protected] I also have other things such as an engine wiring harness and pull type box to suit said clutch if people want to pay extra, can work that out at a later stage. Can also supply most of the stock IC piping to suit the 26 into a 32 if needed.

$1800?

bump

bit of a crappy pic but its the best i could do off the phone.

bump

bump.

Bump

all pm's replied to. please no stupidly low ball offers.

bump

bump

Hey everyone. I have some r34 calipers (the gold ones) fronts only, some slotted disc in 324mm diameter. and Also PMU pads in the brembo's. The pads and calipers have about 3000km of highway use which was a trip from brissie to townsville and back. Both discs and sets of pads are fine with PLENTY of life still left in them. The calipers are in a good condition with a minor scratch on the inside of 1 caliper. I am selling these due to having changed to an AP racing setup now and no longer need these. The only picture I have is of when they were on the car as the camera has since broken, if you want more pics let me know and I can see how the phone camera goes. Price: $2000 Location: Brisbane (would prefer local pick up buyer but can freight at buyers expense) Contact number: 0421 933 614 Email: [email protected] Thanks, Nick.

Now that christmas has come and gone, bump.

bump.... again...

bump

By the way every one, at this price, it will also including cooling piping to suit a 32 gtr, greddy type r BOV, plumbed back in that piping, cooling pro 600x300x100 IC. And seeing as the asking price might be a little ambitious, now asking $45k.

Yeah I do have the engine bay component of a wiring loom for it, coil packs and wiring, the water and oil lines are new. I did use some of the sensors, i.e. knock, off the original engine from my GTR, and they'd been working fine (was a running engine when i pulled the stock one out)

Thanks R31Nismoid. And as i said guys and girls, ONO... means i am negotiable.

Here are some build pics as well: I forgot to add, the engine at the moment is setup for a power fc Djetro. If the buyer is keen, I do also have this, brand new.

Well guys and girls, I have decided that I have other things in life that I need to chase. I.e. Having somewhere to live, so although its only JUST been built i've decided to sell the RB28 i have sitting downstairs. All work was completed at JHH here in Brisbane and I have receipts for it all. Basically i'm chasing 50k ONO. for the engine, she's brand new, not even been started yet. The list of parts is the following: Tomei sump baffle Tomei oil pump 24U N1 block Tomei 2.8L stroker kit - Crank, Rods and Pistons with cooling channels ATI balancer - 1000hp varient with additional pulley for water pump ARP fasteners throughout of course. ACL race series bearings Tomei headgasket New Nissan thermostat 1mm oversize valves for intake and exhaust. Bronze valve guides Oversize valve seats Head flowing and porting to suit. Head matchported to injector plate Supertech dual valve springs Titanium retainers Custom 272 @ 10.55 mm lift degree cams Greddy cam gears Gates Racing timing belt Tomei dual entry fuel rail Sard 800cc injectors SARD adjustable fuel pressure regulator Garrett T04Z Custom manifold with true split pulse collector Twin 38mm Tial wastegates Custom dump and wastegate plumb back pipes to suit a 32gtr. The engine also had: Bore and torque plate hone block Block was decked. New welsh plugs fitted New seals, bushes and hoses all round. Throttle bodies were stripped, cleaned and serviced. Basically this engine is good to be dropped straight in and go. Again, I am asking $50,000 ONO. Please, obviously no stupid offers. You can contact me on mobile: 0421 933 614, if you call and I don't answer just leave a message or text me. Email: [email protected] I am located in Brisbane, just north of Mt Gravatt. Would prefer local pick up, BUT CAN organise transport interstate if required, obviously at buyers expense and understanding that no damage is covered (and transport company's won't cover damage either).

SOLD!!! pending cash clearance.

PM sent.

bump, price drop, $700 people.