RiCkY TuTtY

Bump

Hi all, After a Factory NON-Airbag type steering wheel removed from a r32/33 and/or similar to whats pictured please I am located on Morayfield Best to txt me on 0410764859

Hey guys i am in need of some Nissan Skyline R30 Hatch 1982 parts as follows: Right hand rear brake caliper (disc) LOW pressure power steering line (rack to reservoir) Located: Kallangur, Brisbane, QLD

Cheers for the reply bud, i am getting a quote from the mechanics next to my work on how much the brake/clutch specialists a couple of suburbs away would charge to rebuild (fingers crossed) if they can and if so, i am hoping it wont cost an arm and a leg

Well basically, my brakes have failed in mine - check list that has past are - calipers, hoses, lines, air locks, etc. and the booster but ultimately it has come down to an internal leak within the Master due to pedal going to floor and is really soft. have also spoken to mechanic's as well with the same conclusion being the front piston seal has given way... I don't think they are available new? But i haven't been given the chance to call round due to work + Funds are not the brightest at the moment either...

As above i am in need of a Brake master cylinder to suit a 1982 R30 Skyline Hatch Does anyone have one in QLD?

indeed, but... i have an auto unfortunately no BUT! i can go to the library for you if need be

i wish it was so i had 4 gears! lol

Mr30 1982 how come?

Hey all, I tohught i Might rub this in but..... I now am a proud owner of a R30 Repair/Service Manual! please fell free to ask any questions related as i most likely could help having this handy piece of artwork for R30's!

its ok getting everything ordered through workshop next door so everything will be done by Wednesday

ITS ALIVE!!!!!!!!!!!!!!!!!!!!!!!! :bunny: :bunny: sorry had too! now ill have to do a oil flush with new oil/filter and prob do the auto at the same time any reccommendations on oil but no castrol, etc crap? also with the auto is there such a thing as filter replacement? similar to a vn's auto service kit?

I think u might be im not sure? have a look on the service manual in first quote, open service manual, scroll down to page 59, left column #17 and read the *note*

HAHAHAH theres no doubt about that!!! i will probably know how to do any timing chain now since its taken this long to do it on mine! next on the list is front coilover conversion! already have hubs, knuckles, brakes, etc (and 1 LCA, but need another LOL) just need coilovers for the front and lower the rear to compensate (OR get rear coilovers with front S13 tophats to suit tower) and bobs ur uncle! BUT i wont be going BOSOZUKO style trust me!!!! so there should be any problem with tie rod inclination then after that rack'n'pinion hopefully i hate BOXES!!!!!!!!!!! OH! i forgot to mention but will look into the mounting of the s13/R31 caster arm brackets that mount to the radiator support so i can run adjustable caster arms aswell (i'm aiming for increased caster (as much as possible without issues) aswell as around 1-1.5 Degree (AT MOST) Chamber aswell) as i am a qualified underbody specialist/Wheel Aligner (but not as current job ) thats wat would be good for around the streets for cornering at a respectable ride height without chopping tyres (depending on the r30's reaction to these dramatic changes with adjust toe to suit but would be around 2-3mm TOTAL toe)

there is 2 sort of shiny links on the chain but im not sure if this is correct on mine due to there's only 35 links going from each mark on the cam/crankshaft i had to pull the hole front of the motor and start again... i will try and get to it 2mora hopefully just every things hectic and doing it on my own is becoming difficult to time restrictions and other events getting in the way.... Thankyou guys so much for all ur help so far i cant believe how much u guys have helped! wouldn't of gotten anywhere without u guys! now i have do de3al with my thumb playing up from previous surgery