bokee

not sure on the cam size as they were in the head already, the lift is 8.9mm which ive calculated not sure about duration

yeah i was chasing 350rwkw anything over was a bonus, it is definatelly fun to drive, traction is a problem now lol

well i got my car finally tuned today after a run in tune, ive made 350rwkw on 22psi boost i wanted to run more boost but i think 350 is enough for now

thanks buddy, the rebuild kit was $2250 posted to adelaide, but i did add a bit more for the i beam rods so not quiet sure what was the exact figure value for money i think cos its all you need really

UPDATE!!! well i got my car mildly tuned only on wastegate spring pressure 10psi but creeps to 13psi and made around 250ish rwkw. (i expected less) my Tuner said just do drive it for another 500-600km just on that boost, driving it normal and giving it a bit but nothing too extreme. Still looking forward to the full tune at 23-25psi should be within couple of weeks, cant wait!!

just finished running in, done 1300km will get it tuned on monday to 25 psi ,anything over 350kw on rears is a bonus ill let you know how i go

Here is a couple of vids of a first start up need to fix the idle its idling too high http://www.youtube.com/watch?v=drETUueuCEI&feature=youtu.be http://www.youtube.com/watch?v=nD0sMNBzm1o&feature=channel&list=UL the video quality is a bit crappy especially in the second vid

Hi guys well my engine is done unfortunatelly my builder didnt take any photos :( a bit dissapointed but oh well am happy the engine is up and running and now i just have to drive it to wear it in a bit before the tune here is a few photos i took piston rings getting gaped crank is in ( this is as far as i have it when it was getting build ) looking good just test fitting see what it looks like nearly there all done running in process as we speak

i know i havent been realy updating so often but the engine will be put together sometime either this week or next week, was waiting for the oil pump to come then wrong pump sent arghhhhhhhhhhhhhhhhhhhh so frustrated at the moment cos i just get empty promisses of people that will suply me with parts f*#$ really shits me, at the end ill just end up going with a standard rb26 pump and upgraded gears cos i cant be stuffed waiting no more, i really need to get the car on the road.

hey guys just a bit of an update, i got my block and other bits back from the machine shop today here are some photos crank collar fitted balanced and polished head was faced for perfect gasket seal block bored, honed and decked pistons just test fitted looks good so far cbf to mask everything properly so i just used 10c and 20c pieces to mask off the wels plugs lol

well yesterday i dropped my head, block, pistons, rods, crank, clutch+flywheel, harmonic balancer all to be cleaned and balanced at ADVANCED ENGINE RECONDITIONERS in salsbury - block is going to receive a deep clean paint, dirt etc etc - will also deck the block 2 or 3 thou - Bore and hone 20thou - Balance everything - crank is going to be machined and a crank collar is going to be fitted - Head is going to be cleaned and faced should be all done by the end of next week I also bought a new rb30 water pump, sump gasket, manifold gasket and few other things. So while all that is being done i sandblasted my turbo compressor housings and my engine mounts. i also cleaned out and painted alternator, starter motor. and exhaust manifoild in heat proof paint the paint is fresh thats y it may look a bit funny compressor housing sandblasted looks better than black all assembled ready for 25psi of boost now we just play a waiting game for the block and all

HO HO HO MERRY CHRISTMAS, well it felt like christmas today i got my engine rebuild kit pistons, rods, bearings, headgasket thanks to Brad from spool imports he has been a great help and sent them over fast If i am lucky 2mrrow ill go and drop my head, block, crank, rods, pistons for a 20thou bore and hone, clean, balance, facing off the block and head for a perfect gasket fitment etc etc. here are some photos

Well just a lil update guys i have stripped the whole motor and will be sending it back to sydney for a rebuild by the guy who originally put the whole engine in the car/ rebuild. I have also found out a full story in behind this engine and it ends up that the guy from SMD workshop has bought the short block of anothey guy who wanted to do the conversion, so basically he has lied to the guy from the workshop that the engine has been done, it all looked legit with shiny pistons and all but pistons were only new rb30 pistons. I do appologise for calling him a lier and a bullshit artist. i just didnt know the full story but still doesnt change the fact that couple of the things he said didnt make sense anyway ill leave it at that. we just got off on the wrong foot. anyway. will be rebuilding the engine properly and hope it all goes well

lol yeah i have the same problem i cant browse anything in front of her so she doesnt see the prices lol, she got preety freaked out when i sold the sway bar for $80, she was like who would pay that much money for that, lol

$3K OH OK i didnt think it costs that much but i guess they did everything so it may all add up bit by bit