shaun_perry

Hi guys. I am doing a few more little cosmetic things to the under bonnet of my R33 S1 GTSt. I have a clear cam cover and I noticed that all the electricals and stuff of the cam timing is going to ruin the look of it. I was wondering how I go about putting in adjustable cam gears and removing the electric cam timing gear from the front of the motor?? Do I need to do something to the ECU as I will be removing the original cam timing set up?? I am doint the timing belt soon so i will do this while I have it all taken apart. Your input and advice would be muchly appreciated. Cheers, Shaun 8-)

I kinda thought that, And why not?? I already paid $165 for a clear cam gear cover.

Hi guys. I am doing a few more little cosmetic things to the under bonnet of my R33 S1 GTSt. I have a clear cam cover and I noticed that all the electricals and stuff of the cam timing is going to ruin the look of it. I was wondering how I go about putting in adjustable cam gears and removing the electric cam timing gear from the front of the motor?? Do I need to do something to the ECU as I will be removing the original cam timing set up?? I am doint the timing belt soon so i will do this while I have it all taken apart. Your input and advice would be muchly appreciated. Cheers, Shaun 8-)

Hi guys, I am back I am looking for Sales Brochures for all the skyline models...... Brochures as in, the booklets you pick up when looking at buying a car. Any help would be much appreciated. Thanks, Shaun

Hi guys, longtime no login lol. I am looking for silicone hose kits for radiator, heater and others. If possible a kits that does the lot (rad. heat. vacuum pipes, etc) I know I can buy hose kits on ebay from china. But I would not trust them as far as I could kick them. I would like to know if there is a place in Australia where I can buy these? Thanks, Shaun

I have an 94 ECR33 Skyline GTS-t and I am looking for advoce on power ups for it. It already has a greddy manual boost controller (wound to 11psi), Greddy FM intercooler, 3.5 inch cat back HKS exhaust and a HKS pod filter. I am thinkin next for: Sard Fuel Press Reg Sard 550cc Injectors HKS 3037 Turbo (or Garrett equivalent) Top mount turbo manifold ??? Front facing Intake plenum ??? Electronic boost controller ??? I would like some info on where I am able to buy these parts and if someone can advise me on which brands to choose for the manifolds and a boost controller. Thanks, Shaun.

I would rather use a second hand panel off a straight rear cut or find a second had panel as I don't pay more for the panel than my entire kit. I have seen nissan prices and out here the prices are paramount to theft. Therefore a new part will be my last resort. So my questions still stand. Where can I buy a beaver panel or a straight rear cut (just frame)?

Hi all. my skyline is at a panel beater getting a new rear bar fitted and thay have told me that I need to replace the rusty panel. Does anyone know where I can source a beaver panel or a cheap rear cut?? Thanks, Shaun.

I have checked websites and have not found listings for new fuel pumps, surely someone in Australia sells a fuel pump for a skyline. Can you point me in the right direction to where I can buy a new pump, genuine, non genuine, nismo or otherwise. Even if I have to pay $400 to $500 for it. I'll pay it....... This car is useless to me without it. Thanks

Well the problem has been found.... Not only was the problem the car alarm (now removed), but the fuel pump in the tank is buggered. Anyone know where I can buy one from?? As the auto sparky has called around and says that no one lists one. And how much am I expected to pay?? I found one on ebay and it is in "perfect working order". Should I bid more than $80 for it??? Thanks.

Thanks guy for your help. We think we have it figured. A few months ago I cut off the speaker for my car alarm and I noticed that when I was trying to start the car, the alarm light was flashing rapidly. The car is at the auto electricians today getting the alarm removed. I think that is the issue. Wil let you know how things go. Thanks again.

Question..... Where is the crank angle sensor plug???

Nevermind, now I know what you mean. The Crank Angle Sensor. Will check that and get back to ya.

CAS plug??

It is a 1994 ECR33 GTS-T. RB25det No major mods, just HKS pod filter, and HKS exhaust from the cat to the tip. Manual boost controller. Thats about it. What else do you need to know???

My skyline has been sitting in my shed for about a year and a half and I have started it and run it regularly. It has bee about 2 months sinse the last time it was run and I went to start it yesterday and it would not fire. I have checked all the fuses and relays. We did however find that there was no fuel pressure and found an earth problem with the fuel pump relay so we cut the earth wire and created a direct earth. Fuel pressure returned but the car still wont start. Could it be an ECU problem, as we replace and remove the earth cable from the battery after we runn the engine everytime???? We are going to wind the car over again and check a spark plug next to see if the injectors are firing now. Will let yous know of the out come. Your advice, knowledge, solutions would be PROFOUNDLY appreciated. Thanks, Shaun

The others are buggered too. They have leaked all the fluid out.

Waaaaaaaaaaah........ Doh :'( That sux ass. They are sooooooo cheap. Oh well. I guess I am stuck with standard lowered shocks for now. I had the same HKS Hyper Ds in my car but they are f**ked and to fix them I need a new shafts coz the the top of the shaft holding the spring in had snapped off. Thanks mate.

Hi guys, I have seen advertised a set of HKS coilovers for a R33 gtr. Will those shocks fit in my S1 ECR33 GTS-T coupe? This is the link to the ad with pics. http://www.skylinesaustralia.com/forums/Hk...36#entry4770336 Thanks, Shaun.

So they are for the AWD GTR right? I had HKS Hyper Ds in my r33 GTS-T but are buggered. Your right about the price, ya wont see them at that price for long. If the could fit in a 1994 s1 GTS-T rwd I would buy them off you right now. Do they come with the adjustment tool? No point in me wishin aye. Good luck with the sale. They should go like hot cakes.

Hi all. I have been searching the web and bought body parts for my skyline and have had nothing but troubles and non fitting bits. Is there anyone out there who can point me in towards a site that sells 100% guaranteed fitting body kits. I am also open to buying from New Zealand. I am after a VS Style kit that was offered by the monkey warehouse as it is no longer on their website. Thanks, Shaun

How do I get at that one?? I don't know where it is. Do I need to take the front bumper off??

I am trying to remove my headlights to clean the lenses. I have undone the top and bottom nuts on the inside, the bolt on the top and the grill is out but the thing wont come out. Is there a bolt/nut on the corner??? Is there a thread on here already?? If so can someone let me know of the link Thanks. Shaun.

I have had a decent look through the car and found that it is a 85 model. I am going to convert it to a manual box also. It is a Z31 model. The ZX in the link above is for a Z31. I need to know about installing an LS1 manual into a 1985 Z31 Nissan 300ZX. (Yes I am now thinking of going injected)

This is the type of 300zx it is. If it was the flash shaped one. I would not dare do that to it...... I don't mess with perfection.