Jump to content
SAU Community

Jms_31

Members
  • Posts

    189
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Jms_31

  1. Bump. Have located the missing lock nut so its now a complete set, so grab a bargain!!
  2. Bump. Also got a pair of mint 32 NA headlights, chasing $50 for em'.
  3. -Got a set of Blue Work RS Wheel nuts up for sale, 1.5 thread and missing one of the lock nuts, but in perfect condition - $100 which is still cheap considering what they go for new! -3inch Front Pipe with stock dump still attached, came off my 25 - $50 Will edit this with more stuff over the next few days! Contact me on here or 0407 633 573
  4. Thats pretty tempting!! But i really need to sell this as i need the money il keep it in mind mate.
  5. Cheers mate, yeah ive put alot of hard work into this over the past couple of years! And yeah it drives and handles so well its incredible!
  6. Bump. Still got this! Price drop to 10,000.
  7. Bump. Price drop to $10,500!! Someone must want a clean and rare HR31!!!
  8. Cant edit my original post for some reason. Price drop to $11,000. Im losing alot of money on this at this price!!!
  9. Thanks mate! Bump. Open to offers guys.
  10. Got my Skyline up for sale as im potenially buying a 32 so i need to sell this asap! These are getting harder and harder to find in good condition these days. Here It Is: Make/Model: Nissan Skyline HR31 GTS-X Year: 1988 Kilometers: Chassis -165xxx Motor - 110xxx Transmission type: Manual Engine: RB20 Silvertop Colour: Jet Black Modifications: Refer Below Registered: Yes till October Location: Adelaide Hills, Nairne Contact Details: 0407 633 573, PM or reply here as im on here every day Heres a list of stuff thats been fitted to the car. Being a mechanic by trade ive done majority of the work/upgrades myself so i know that its all been done properly. -Full Respray in Jet Black, Engine Bay, Door Jams and Boot all done also -Exedy 5 Puck Ceramic Clutch -Jap Front End Including Projectors, GTS Embossed grille and Vent in Front Bar -Clear Front Indicators -Rare Import Afterburner Taillights, these are real hard to find these days and look the goods! -3Inch Turbo Back Exhaust, Decat Pipe and Kakimoto Rear muffler - Sounds decent for a 20 -Alpine head Unit with Ipod cable, Pioneer 6inch speakers in front and rear -S13 Front Hubs and Knuckles, Wheel Bearings Done and New Tie Rod Ends fitted -ISC Fully Adjustable Coilovers all round, 8kg F & 6kg R Spring Rates - Fronts using Australian Thrust Bearing Kit -Gmax Rims, 17x8 and 17x9 +35 offset, running 20mm front and 25mm rear bolt ons - Rims are only a year or so old, have a little bit of rash on one rear only -Bridgestone Potenza Adrenalins on the Front, Either Toyo Teos Or Bridgestone Turanza's will be on the back -R33 GTS-T Brake Upgrade Front and Rear, Slotted Rotors all Round, Genuine Front and Bendix Ceramix Rear Pads -Reconditioned BM50 GTR Spec Brake Master Cylinder to suit brake upgrade -GKtech Alloy Steering Coupling/Bush -RB25 S2 Turbo fitted, with all new gaskets fitted and new o2 sensor -K&N Pod Filter -Bosch 040 Fuel Pump -Cooling Pro Front Mount Cooler & Piping Kit -A/C condensor, compressor and lines all removed up to the firewall to allow for cooler to fit neatly and to tidy up engine bay -Apexi Turbo Timer and Tisonics Alram/Immobilizer/Central Locking Kit all wired in together to ensure correct operation -Whiteline 27mm Adjustable Front Sway Bar -Yellow Jacket Aftermarket Coilpacks, only a few months old -S15 Front Adjustable Pillow Ball Sway Bar Links -Cusco Front Strut Brace and Master Cylinder Stopper -4300K HID's, these are a great improvement over stock globes! - All Hicas associated parts removed. Lines cut and shit from rack, aus spec power steering reservoir and pump used. All courtesy of Garage 7 -Z31 Urethane solid rear subframe bushes fitted. -Rebuilt Alternator/New High capacity Battery Fitted at same time Ive replaced the old RB20 due to it having low comp on one cylinder, so it has a RB20 out of a cefiro in it, so far its given me no drams, doesnt blow smoke/burn or leak any oil. Majority of the gaskets were replaced, and the timing belt and water pump have been done recently on it. Ive had the car dynoed recently and it made 167kws on 14pound, and around 155kws on 12 pound which is what its running atm. Should also mention that i only run this on BP Ultimate, nothing less!! Bad Points: -Both rear quarters have dents in them, one side was has been there since ive owned it, the other side was caused by my sub not being bolted down -Castor Rod Bushes worn slightly, evident when braking at around 80kmph Price: $12,000 ono. Im fairly open to offers though, so dont hesitate to make one thats not to rediculous! Ive spent around 6-7k on this since ive owned it, so im in no way getting as much back as id like, but im happy to see it go to someone who will look after it and enjoy it as much as i have! I know theres more but cant think of everything at the moment, so il be editing this every now and then! But if anyone is generally interested there best off coming to look at it and il tell you everything youl need to know! Heres a few pics, can get more upn request. Cheers, James.
  11. Few Parts added, need these gone as i need the money!!
  12. In need of a turbo oil drain fitting to suit an SR turbo asap!!! The one that bolts to the bottom of the turbo and goes to the block in case anyone needs to know!!!! If anyone has one Msg/call 0407 633 573. Thanks!
  13. Bump. Need these gone!
  14. Got the following up for sale that i need gone, all located in the hills. Genuine RB20 Water Pump - $80 Genuine RB25 S2 Water Pump - $120 Genuine RB Timing Belt - $80 ^^ All Brand New/Unused. Cefiro Brake Master Cylinder, Looks almost new, hardly used - $50 RB20 Power Steering Pump and Alternator - $20 each PM or call/sms 0407 633 573
  15. RB25 AFM and hard intake pipe/silicone joiners to suit. In perfect working condition. After $100 PM or sms/call on 0407 633 573..
  16. Bump!! Price drop on pads to $60, which is cheap as!!! And turbo dropped to $100 Need this stuff gone.
  17. RB25 Air Flow meter for sale, in perfect working order with mesh still attached. Chasing $60. Located in Adelaide Hills. PM or Call/SMS 0407 633 573
  18. FOUND! Cheers JD_CEF!
  19. In need of an R32 RB20DET Air Flow Meter, must be in good working order. Have an RB25 one here to swap with if needed. PM Me.
  20. Bump! Boost guage sold, other stuff still here and needs to go!
  21. Bump. Price drop on pads to $100! Want this stuff gone guys.
  22. Its in perfect condition mate, only a couple of real small marks on the outer casing from the mount, nothing that stands out at all unless you look real close. Im sure theyl come out with a polish anyway. Will be able to get you pics in the morning as i dont have my camera with me atm. So if you wanna PM me your email address and il send em through to you as soon as i take them :-) Cheers, James.
×
×
  • Create New...