skyr32gts4

Please help! I recently removed my injectors out of my rb20det, sent them off for servicing and re installed them. Everything was running smooth untill the next day (cold engine) one of the cylinders would not fire, i located the cylinder by disconnecting coil packs and replaced the injector to that cylinder. Again everything was working smootly, however not long after the problem returned (in a different cylinder) but would disappear after the engine warmed up. I changed the plugs thinking they might be the cause and i have JJR coil packs installed about a year ago. The wierd part is, once the engine is warm the cylinder fires again with a slight miss, but no noticiable power loss. any help or ideas would be much appreciated, cheers luke.

quick question, a mate recently gave me his stock r33 gts parts he no longer wanted to fit to my r32 gts4, turbo, injectors exhaust etc just wondering if the rb25det injectors would fit my rb20det. thanks for any help

I have recently installed a boost tee into my 32 gts4, with it set to min my boost is running at 13psi with boost spike to 14.5psi (before install 11psi). When i change quickly 1st-2nd or 2nd-3rd it looses boost pressure and sits below 10, however if i accelerate in either gear it maintains pressure, could this be a boost leak through the stock bov? Ive fitted a fmic and 3"cat back zorst if that changes anything

i have a pre programmed eprom by some company called marobi, only cost $15 wasnt going to put it in but maybe it can solve my problems. think its a bit dodge though as not tuned on my car

thanks for the reply installing my front mount upped boost to 10psi, after puting in a boost tee i had fuel cut with any increase above 10psi thought that might have been ecu over boost protection, but maybe its something else. maybe aftermarket ecu is my only choice. thanks again

hi, just wondering if anyone could tell me where to get a standard ecu remap for my r32gts4 in sydney? and if this would remove the boost cut, as i want to increase boost above 10psi. also what is the rough cost for dyno tune/ remap? cheers

hi, just wondering if anyone could tell me where to get a standard ecu remap for my r32gts4 in sydney? and if this would remove the boost cut, as i want to increase boost above 10psi. also what is the rough cost for dyno tune/ remap? cheers