oohogwash

Edited - Trader Ad

Do you still have the fittings.... i am interested call on 0439838477

Thanks I will check them out, do you have any idea of what they charge, sort of work they do off hand...

Getting my project car painted, any good reasonably priced good quality people on south bris / gold coast. I have rubbed the car back and coated with etch primer, all windows, bits removed so its just tidy up any dents, imperfections and paint. Color to be black metal flake with blue perl.. Thanks Gavan

This is hard to describe for me, hope it makes sense to you guys. I have some rod ends, (heim joints) that I am using to adjust the length of a rod with. Ideally I wanted to buy threaded tube with nut end as one piece and a sleeve that fitted over that rod around 3mm thick. That gives me adjustable length... I could not find anwhere that sold this type of set up, especially with rh and lh thread... It is pretty expensive to get a machine shop to make just a few of these... Maybe you guys know of someone.. I also looked for hex or thick rod with the 3/4UNF LH / RH thread already done that I could get turned down which might make it feasible... no luck As a last resort I have made up some bits out of threaded rod end tube with hex heads tiged onto them... It is probably fine, but would have liked a milled piece. Eventually I bet I end up breaking the bank to pay a machine shop... Any advise appreciated...

Where is the best place to get these bits from (bends, flanges). I am in Brisbane if that makes any difference. Thanks