lovelessnator

Hey guys I'm after a complete standard turbo back exhaust system for my 93 r33 gts can any one help me out?? Need it ASAP

Are ok well I pick the car up Tommorow so I'll do a quick check an see! I also got in contact with the person that built the motor today an he assures me it has been built, he remembers building it 1.5 years ago and since then it's only seen 10,000 kms so it should be what they say it is:/ I'm a very fussy Pearson myself but I've done all the checks I can an it all seems fine so I can only go on that..

I tried mate but because it was done a few years back they don't have it on file now.

Hey guys im looking at buying a 1993 s1 r33 gtst and it's had alot of engine work done. It's currently producing 307rwkw. Now the guy that's selling it said he carnt find any receipts for any of the work done to it because he's moved house an there lost hmm:/ this is where it gets tricky:) the block he assures me is forged (built by pavtech) now he carnt tell what it's built with in side being that he has to much money an he has no idea about cars! When I was there an started it (when cold) it had what sounded like piston slap untill it came up on temp abit, he says that's the way a forged block sounds when you start it an it's could:) is this correct, can they chatter abit untill it gets warm?? It also has no cold idle start so it takes a while to.

Are ok to easy:) the car has quite abit of work done so I'm just trying to work out how much it's gonna cost to get it to road worthy condition:/

Hey guys can some one shed some light on this for me. I'm looking at a skyline next week an it's sold with out a rwc, my question is it has the cooler pipes running through the engine bay through the body (where the air box an battery would normally sit) how do I go about getting a rwc with this bieng done to it already? I'm in Vic if that changes anything also.. Cheers

Is this still for sale? Just want to no were your located and how many kms the car/engine has done? Cheers

Carnt believe this hasn't sold for that price! Best of luck with ya sale mate the things mint

bump

bump it up^^

[FS - VIC] nissan exa 15et ($3,500) All Cars/Bikes For Sale? Or Wanted?* FS Price/Amount 3,500 Open to Swap? Yes State VIC Short Description for title? nissan exa 15et Currently Registered? No Transmission? MANUAL REGO/VIN Number? - Contact Info Other than this Forum? 0412285096 Description hey guys up for sale or swaps is a nissan exa turbo, its has the 1.5et in it and is factory manual an turbo. Its got an upgarded garrett turbo and is a fast little car, boost gauge, blow off valve, turbo timer, new pbr heavy duty clutch, new pbr lightend flywheel, factory sunroof, new plugs and leads and it just had a service and also has tx3 rims. It runs nice and solid and has never been boosted befor! was owned by my mechanic as his daily but has been sitting for some time now! the body is straight and the paint is good condition for its age! interior is perfect! its got 232,000 on the clock an seems to have a sevice history as well! Also i have another complete exa turbo that will go with it for parts and mechanicly its good as i drove it home just the body is crap! Looking for swaps prefurably of anything of interest! would really like another vl or converted vl turbo.. Is pretty much ready for reg as i carnt see much that it would need! msg for pics if your interested 0412285096 or if you have any questions, cheers

thanks champ youve done good! cheers

oh an its a 1.5 litre turbo engine in it..

hey guys does any one no of some simple but effective mods i can do to a exa turbo or have a site i can look up? cheers

hey guys up for sale or swaps is my ute unfortunatly, i dont want to get rid of it but its just not practical for work any more. Im looking at 19,500 cash for it or swap for a neat skyline with mods and cash my way so i would still be able to by a work van. heres the link to check it out guys http://www.carsales.com.au/all-cars/privat...&__Qpb=true if you have any questions please contact me via call or txt, cheers..

bike still up for sale guys! plenty of interest but no sale yet.. will also swap for a yzf250

hey guys up for sale is my 01 vu ss ute, its a very regretfull sale but i have to let it go due to commitments with my house. PRICE $20,500 its tigar mica in colour lowered on king springs sss low in the front and lovells in the rear 20inch rims with crome inserts brand new tyres fitted 2 days ago saas adjustable racing bucket seats on standard rails so its legal hsv cluster vy hand brake vy gear knob vy leather gear stick boot in dash dvd player, full touch screen! big stereo (2x amps, 6x9's, 6.5's, tweaters and a sub tub liner with rubber inset DBA cross drilled and slotted rotors all round (less then 1000kms old) ls6 manifold pacemaker extractors twin 2.5inch exhaust with 1 resinator in each side and 4inch dump pipes out each side at the rear (sounds awsome!) 6 speed gearbox (perfect condition, very tight and no noise or crunches) CS8 ripshifter tex Z grip clutch (made for street and strip, big hp rating) lightend flywheel K-Mac 4 point adjustable camber kit in the rear maffless tune over the radiator cold air induction kit with K&N filter the car is spot on, ive never had a problem with it since ive owned it. it has a full service history by holden (with books) 108,000kms on it but only says 44,000 because its got the hsv cluster in it now the car past a road worthy just over a monthe ago ( because i got defected for the exhaust) i will also give the buyer the standard parts like, genuine standard holden exhaust, standard springs and the airbox. no air flow metre as i lent it to a mate and never seen it or him again.. the car has never been in an accident or any thing and a vic check is more than welcome. there is one problem with the car, 2 months ago some little sh@t keyed the left hand door and part of the rear panel! ive had a few quotes done up and it is on the 800 mark to fix.. pics can be seen here http://forums.justcommodores.com.au/member...ar-pickies.html my number is 0412285096 you can call or txt, cheers

pm sent

hey champ im in east gippsland (vic) in a town called rosedale.. no worries ill send them through to ya, cheers

Item Condition: used Reason for Selling: need funds for my house Price and Payment Conditions: $4000 firm For Sale is my 2003 yz125, genuine and very regretfull sale but it needs to be sold to fund my house! ive had this bike for 3 years now and i brought it off an older guy that brought it from factoryin 2003. this guy was a freak with maintaing this thing, it was pulled down every ride and cleaned so when i brought it off him it was spot on! since owning this bike i clean it every ride, change the filter every ride and every 5th ride i change the oil with motul oils! its never been raced mainly just tight bush trails. it was completly rebuilt about a year ago with CYK piston and rings, its got a lightened and balanced crank, new gears throughout and so on.. its been pushed to about 150cc they reckon and it gives the 450s a run for there money. since this work i reckon ive only ridden it 5 to 10 times.. other parts include: pro taper high rise bars new fork seals factory fx gripper seat pro sprocket (rear) new front and back brakes full fmf shorty system near new tires excel rims sicks pack racing graphics you can call or sms me on 0412285096 and if you msg me your email address ill send you some pics just because it wont let me put them on here

7500??

Mods.. rebuilt block new dizzy new spark plugs and leeds new crank angle sensor new coil new belts vlt lsd 3.45 gears sss low king springs 3inch mandral bent exaust off the turbo with high flow cat 5 speed box 1100kg ceramic 5puk clutch gtr lightened flywheel battery relocated to the boot new starter motor ss high mount mainfold ( fully heat wrapped) 600hp turbo 38mm external waste gate pod filter na runners with a polished nizpro plenum xf throttle body gtr injectors (440cc) adjustable fuel pressure reg (with guage) walbro 320lph external fuel pump oil catch can hybrid gt spec intercooler with 3inch polished piping turbo smart mega sonic blow off valve shaved head new inlet and exhaust valves heavy duty valve springs cometic triple layer head gasket wade 1147c cam (very very lumpy) roller master adjustable cam gear microtech lt12s computer new steering wheel boost guage e-boost and turbo timer (not hooked up yet) thats all i can think of at the moment im sure there is more.. It made 312 Hp at the wheels (232RWKW) only on 12 PSI so alot of potential left in it and i also have the dyno print out to prove it.. Most of the work was done at Independent motorsports and they reckon once the car is all run in you can expect the power output to be around the 290-320RWKW with a full tune! Ive spent just over 20k on this car just on the drive line alone! Its been drivin 208kms not 208,000kms and most of them kays were on the dyno, so as you can see the car is not even run in yet! It will be the toughest sleeper on the road as it looks dead standard except for the cooler hangin down:) The car is not on the road and will not come with a roady. It wont need much to pass i think just new front rotors, new windscreen and maybe new bush's.. Over all the car is straight and the paint is at about 90% but the clear cote has started coming off the boot and a little bit on the roof also. Last week i had some littler bugger decide he would undo my wheel nuts on the front left hand side, i was driving out of the tuners and the wheel fell off so there is now a dint in the gard about the size of two fists! lucky i was only doin 10kmh when it came off. The car is only up for sale because i start building my house in a few weeks and i need the spair cash, very regretful sale but it has to be done. Also the car is 100% drivable it got retuned 1 week ago so its ready to go! pics can be seen here http://www.carsales.com.au/all-cars/privat...&__Qpb=true google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);

pics can be seen here guys.. http://www.carsales.com.au/used-cars/priva...bo&trecs=18

PRICE DROP i need this car gone guys iv started building my house already! throw me some offers or open to swaps?? Mods.. rebuilt block new dizzy new spark plugs and leeds new crank angle sensor new coil new belts vlt lsd 3.45 gears sss low king springs 3inch mandral bent exaust off the turbo with high flow cat 5 speed box 1100kg ceramic 5puk clutch gtr lightened flywheel battery relocated to the boot new starter motor ss high mount mainfold ( fully heat wrapped) 600hp turbo 38mm external waste gate pod filter na runners with a polished nizpro plenum xf throttle body gtr injectors (440cc) adjustable fuel pressure reg (with guage) walbro 320lph external fuel pump oil catch can hybrid gt spec intercooler with 3inch polished piping turbo smart mega sonic blow off valve shaved head new inlet and exhaust valves heavy duty valve springs cometic triple layer head gasket wade 1147c cam (very very lumpy) roller master adjustable cam gear microtech lt12s computer new steering wheel boost guage e-boost and turbo timer (not hooked up yet) thats all i can think of at the moment im sure there is more.. It made 312 Hp at the wheels only on 12 PSI so alot of potential left in it and i also have the dyno print out to prove it.. The car is not on the road and will not come with a roady. It wont need much to pass i think just new front rotors, new windscreen and maybe new bush's.. Over all the car is straight and the paint is at about 90% but the clear cote has started coming off the boot and a little bit on the roof also.

bumpy