Buckna

Hey guys. All this gear is in A1 condition, was all destined for my s14 drift car, however motivation is lacking big time and money is always alot nicer than parts sitting around! Ok so here is the general jist of the parts. R33 RB26, 160psi across all 6 cylinders, gold rocker covers, motor is complete with all hang ons, including AC pump, sump, diff, etc. Had all intentions of putting it in, have pulled the sump off and motor is dead clean inside, all inspections and tests welcome. Comes with turbos which have been rebuilt with N1 spec cores and have heat treated rear housings, however it looks like one of these may have had a slight rear seal oil leak. Wasn't noticeable when car was running, only when I pulled front pipe off (3" jap pipe, will include), tiny amount of oil in the rear dump pipe(stock dump pipes). Comes with Full engine loom, NEW factory coilpacks, no standard injectors or rail, has AFM's with HKS air filters attached, no ecu as was running power fc which has been sold (I was going to run my motec) Also have, Siemens injectors, unsure 100% of size, powerfc was set to 60% on injector duty, so that leads me to believe they are at least 600cc, PFI top feed twin entry fuel rail, anodised purple, shiny, -6 fittings. JUN cams, 260in 270ex 9.25 lift, with tomei cam gears, great condition, are not in motor, came out of another motor from japan, and I bought with intention of using them, however they will not suit my RB25. HKS triple plate clutch, clutch is near new, heaps of meat left on it, PUSH type. Hub centre style clutch. Prices: Motor complete with hangons, turbos, loom, coilpacks, etc $3800 Injectors + Rail $650 Cams + Gears $850 Clutch $1800 Name: Buckna Phone: 0427282562 Location: Hamilton QLD (option1garage) Note: All parts can be sent interstate, I work for a SAU sponsor and have had no issues with sending large parts out previously and I'm sure my works trader rating would speak for itself. All parts are verified to be in a good working order, and were removed from a running track only GTR less than 1 month ago. (cams were purchased separately however are also in good condition)

pretty cool build. I have the same sort of setup. s14 series 1, r33 rb25 with 3037s, makes 296rwhp on 15psi. hope to see this at winton for drift attack!

grrr, fail town. thanks guys guess that's just motivation to put the 26 in. lol.

Hey guys, need a bit of insight. Have a set of JUN cams for rb26, 260in 270ex with 9.5 lift each. Now I know if I put them in, I lose vct, I have tomei cam gears to go with them. Along with a MOTEC m48 pro, nismo 740cc injectors, greddy inlet plenum, garrett 3037s. I know rb26 heads run solid lifters, I have a couple rb26 heads sitting around, and also a complete rb26 that is being forged and thrown in down the track, but was wondering if I could run these cams in the 25 for the mean time? Would there be any dramas with the 25 having hydrolic lifters? As I know this is the case with stock rb26 cams, just not sure if it's the same with aftermarket? thanks! Buckna

window is tek screwed in. will upload pics shortly.

genuine eastbear mirrors, blue : $150 Genuine TRUST front bar, been stitched up a bit. $250 GTR bootlid, no wing. $50 GTR doors, no glass, no reinforcments, great for track cars. $40ea Shell, race only non compliable shell, decent condition. come check it out. $500 (more pending what is left on it) 10 point bolt in cage, looks to be safety21, around the dash. $900 Cobra fixed back bucket seat, wrap around type. $300 Blitz dual SBC boost controller: $300 B pillar floor brace. $150 C pillar brace. $150 Strut brace front and rear pair $200 RB26 engine loom, perfect condition. $250 GTR castor rods ARC adjustable jap chunky items: $150 Cusco? rear camber arms $120 China rear traction arms $80 China hicas lock bar $80 GTR Diff, OS giken 2way $800 HKS triple plate clutch, near new meat on it $1800 Big SELBYS brand swaybars, adjustable, blade adjustable both, 27mm front 24mm rear $220 each Perspex rear window, slightly yellow, prob needs clean. suit R32 $100 R32 quarter glass $50 each (pull em out yourself) R32 GTR Vspec bootlip: $100 R32 GTR grill: $80 R32 GTR/gts4 coilovers JIC, none base height adjustable $500 Dual blitz BOV on stock GTR BOV pipe thingy: $200 pair R32 GTR brakes. Solid rotors, look to be endless pads (will confirm) $800 S1 Splitfire coilpacks, less than 6 months old. $400 Fuel cell, will check litreage, $220 Bosch 910 Pump $120 ARE custom surge tank, 2.5 litres by the looks of it will confirm $250 Magnafuel twin entry fuel reg, big HP one, $250 PAIR r32 GTR wheels 16x8 +30, one stock colour, one has had paint removed. $350 pair Panasport G7 wheels, 17x9 +20 all round, staggered brake clearance for bigger rear dish. $1000 set 3" front pipe for twin turbo setup $120 blitz 100mm thick GTR cooler with mounts etc. $450 contact buckna. 0427282562 or reply here. all parts located in brisbane. can post realistic parts. request pics for now, will upload a heap this weekend.

Ok, as much as I love the forum debate over who can get what from where at what price. Keep it elsewhere ladies. Let's just look at it this way, the gearset, retail is $4960 (source: http://otomoto.com.au/osgiken/close_ratio_gear_sets.htm) I don't care if you can get it from some place your brothers friends uncle knows a guy in japan that can get it to your door for $50 less with a 25 week wait. A gtr gearbox is worth approx $600ish, The billet sandwhich plate's don't get given out for free when you visit the TRUST shop in japan i'm sure. Yes the box is second hand. But, as the pictures show it is in very good condition. More so, the box is rated to 800hp, it was running behind a 26 running stock turbos with a computer and injectors. Let's just say, it was no power horse, so the gearbox hasn't had a hard life. As you can see from the condition of the box in the pictures. But whilst you ladies get your knickers in a knot regarding the condition/price/colour/sexual orentation of the part I'm selling. I'll happily advise that it is currently sold pending payment, and I'll update if for whatever reason this sale falls through. Buckna.

http://www.flickr.com/photos/tweakedover/s...57624125014050/ there is some pics of the box, and a stock GTR box for you guys to compare it with If the box gets sent via courier anywhere, I would prefer to send the box as is now, pulled apart, with bellhousing seperate and all bolts etc in a secured taped bag, this way when the box arrives there will be not confusion as to whether the right part was sent, the gearset will be exposed and it would only take 15 minutes or so of work to put it all back together. Leaves everybody happier as for the price. make me an offer, would be freighted on a small pallet, wrapped up securely, have forklift to load onto courier truck. Get a quote with whoever you please. We use fastway and couriers please at work, but can cater for any courier company.

Pics are uploading. Gearbox has a 5 speed OS Giken Gearset, and a billet GREX sandwhich plate. Gears are in perfect condition. 0427282562

bump

Fail? There where no noises when I drove it. And the person who owned it previously, drove it every track day and never had any issues with it, as you would assume. I've known the history of the car since it came from japan with this gearbox in it. I then purchased the car for a few bits I wanted for my s14, and am parting the rest out. So no, I never took the car to archy, and I never took the car to any track to drive it. It was a track only gtr, couldn't exactly take it for a strap around the block. Hoping to have box apart tomorrow.

You guys are cute. Gearbox came out of an ex competitve drift car in qld. I never drove it archy myself. Drove it onto tow truck and into drive way then stripped it down. As I said, I've been busy with events till today. Pending how much work comes in today I'll try pull it down today and take highres photos. Inspections are welcome? Didn't I day that. Thought I did. Thanks for the pm's and sms'. I'll reply to all as soon as the box is apart. Rest of you, feel free to keep stroking each other in my topic.

It is definently not standard. At least I don't know any stock gtr box that can do the entire archerfield track in first gear with ease. gearing is alot higher than standard. I'll pull it apart and check. once again, inspections welcome

As stated, clutch is near new. HEAPS of meat left on the plates, can measure. everything there and included. $1800

As topic states. Have a gearbox that came out of my 32 GTR. Box felt perfect to drive, no abnormal noises or problems with it. has GREX stamped on the sandwhich plate. have not pulled the box apart as yet. Have been trying to find some info online for the GREX boxes. however I can't find any. Inspections are welcome, will pull the box apart for you if you like. Gearbox is at my work. in Hamilton QLD. Can ship the box anywhere in australia, we use fastway or couriers please. If you wish to get a quote from them for it (on a pallet) Do have forklift, and can use any courier company you wish. closest info I have found so far is on this website. http://www.skylinepower.com/gearboxes.html However, I don't believe it's a 6 speed box. Will check on tuesday. As for price. Let's start at $4200ono. Buckna. 0427282562

nate - interestingly enough, no. toygtr - there was nothing left interior wise.

not yet. should come out shortly though, and I can check them over and post pics out of the car. power fc sold.

also adding to listing: genuine blitz 100mm cooler, used condition, no leaks or anything like that, 3" outlets, comes with GTR mounts for rails. $450 Genuine Greddy RB25 forward facing inlet plenum. $800 Nismo 740cc sidefeed injectors $800 Alloy R32 radiator $200 RB25det. rebuilt 4 months ago, 160psi compression across all 6. complete long motor $1500 KKR 430 turbo, no shaft play, works well. comes with vband dump, actuator etc $500 can do a package on the rb25 with greddy inlet, injectors, stock coilpacks (or splitfires), kkr430 etc. all working well in my s14 atm also GTR 27mm SELBYS front sway bar, adjustable, solid. $250 GTR 24mm (i think) SELBYS rear sway bar, adjustable, solid. $250 Panasport G7 rims, 17x9, gtr offset, will confirm when tires are off. $1000 set. autometer sport comp monstor tacho with shift light. $150 gtr reo holes cut for n1 vents, but in tact overall. good nick. $120

trying to reply to all the pm's. will check freight costs tomorrow for everyone who's enquired and shoot pm's off. also. HKS hard piping kit sold. Bosch 044 sold. turns out one was a BOSCH 910, this is still available Brakes sold. Rear cradle sold complete. (this means, all rear arms, diff, shafts, hubs etc) vspec bootlip sold. seat sold cage sold. bonnet sold guards, headlights, indicators sold. will update if any of the above items that are on hold or sold don't actually get picked up.

yes splitfires are series1 rb coilpacks. ie: external ignitor. so will suit. Rb20det, Rb26dett (r32&r33) and s1 rb25det

Hey all. Sorry about missed calls. Hard to answer all calls while stripping car. Have a few people interested in the gbox. Will obviously come with transfer case. I do have tailshaft. $150

will take pics of those items tomorrow for you!

Yes chris. you have dibs on bonnet. pics are coming through to you in a moment. here are some random shots I just took with my iphone, gotta go back to work. excuse the quality, couldn't find the digicam. I really hope they work!

Overwhelming amount of PM's. Will get back to everyone asap. Damn 1 pm every 5 minute rule is driving me insane. Diff is definently OS giken 2way. Gearbox needs to be check if it's 123 or 12345 gearset. Will update once gearbox is apart.

Will update this as I pull more gear off the car. However, it starts with: genuine eastbear mirrors, blue : $150 Genuine eastbear (I think?) carbon bonnet, painted. $350 Genuine TRUST front bar, been stitched up a bit. $250 GTR N1 headlights, one lens has slight crack from stone chip: $200 GTR indicators, both in good nick. $150 GTR guards, both realtivly straight, def in need of some prep and paint. $200 GTR bootlid, no wing. $50 GTR doors, no glass, no reinforcments, great for track cars. $40ea Shell, race only non compliable shell, decent condition. come check it out. $500 (more pending what is left on it) 10 point bolt in cage, looks to be safety21, around the dash. $900 Cobra fixed back bucket seat, wrap around type. $300 Blitz dual SBC boost controller: $300 B pillar floor brace. $150 C pillar brace. $150 Strut brace front and rear pair $200 R32/R33 GTR apexi power fc. with handcontroller $900 RB26 engine loom, perfect condition. $250 GTR castor rods adjustable jap chunky items: $150 China rear camber arms $80 China rear traction arms $80 China hicas lock bar $80 GTR Diff, OS giken 2way (supposedly, will disassemble to confirm) $800 GTR gearbox with OS giken gearset (supposedly, will disassemble to confirm) offers OS giken twin plate clutch (will check meat when out) $500 Big jap brand swaybars, adjustable, will get diameter and brands when out of car $250 each Perspex rear window, slightly yellow, prob needs clean. suit R32 $100 R32 quarter glass $50 each (pull em out yourself) R32 GTR Vspec bootlip: $100 R32 GTR grill: $80 R32 GTR/gts4 coilovers look to be tein will confirm when out $500 HKS cast alloy cooler piping kit genuine: $250 Dual blitz BOV: $200 pair TRUST oil cooler relocator and lines, no core (was damaged) $200 R32 GTR brakes. Solid rotors, look to be endless pads (will confirm) $800 S1 Splitfire coilpacks, less than 6 months old. $400 Fuel cell, will check litreage, $220 Bosch 044 pumps x2 $140 each ARE custom surge tank, 2.5 litres by the looks of it will confirm $250 Magnafuel twin entry fuel reg, big HP one, $250 contact buckna. 0427282562 or reply here. all parts located in brisbane. can post realistic parts. request pics for now, will upload a heap this weekend.