HoWiE_Au

Also empty the catch can and drive around at 2500rpm for say 10 mins , then drive around at 3000rpm + for 10mins and check the catch can . Obviously its going to higher at 3000+ but at least you know its being delivered into the catch can by excess pressure

Just a thought when this engine was built was the clearance between the sump and pickup measured ???. Also is it running the same Valve stem seals ? if so what type are the positive pressure type ?. Yeah maybe even to much volume trying to be delivered. Think of a hose squirting oil into a hole the size of 10 cents and then think about the same size hole but a 1 inch hose feeding oil into it theres a few ideas to make of it . But eliminating other varibles is the way to go. Start by removing your restrictor it sounds stupid but try it, its not going to kill anyone or anything. Cheers Rob

bump

Heaps of VL Calais Stuff Cheap Cerulian blue - Need it Gone Hi guys cleaning out the shed and i have heaps of stuff forsale. Sparco rims and tyres - Ultra rare suit - Nissan - Ford - Toyota +38 offset VL calais Cerulian blue roof lining with loom + rear lights and handles etc - VGC no burns VL Calais Cerulian blue Rear Seat / Top Half - VGC VL Calais Flip ups - Primed ready to go VGC VL Calais Interior Light - Ex Cond VL Calais Interior plugs and screws + Sun visor clips VL Calais Aero director type grille insert - Envelope type VGC / white Vy SS Flutes - Ex Cond / New Vx Standard Eurovox Cd player VGC Sparco rims and tyres - Ultra rare suit - Nissan - Ford - Toyota +38 offset Nissan R33 GTR rear spoiler wing + bootlid ready for paint Nissan R33 GTR Rear Lower Pods Brand New - ready for paint Bahringer Mp3 Mixing deck ALL prices are listed in account page below check them out. I Will post http://shop.ebay.com.au/jess_rob_200...&_trksid=p3686

SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD

Any Luck yet mate? Cheers Rob

I must agree guys i went down there and bought a gtr wing off him and yeah this thing is clean and it looks like mark takes very good care of it. Lets say there is some attention to detail on her ;0

bump

Even strip it and you would still make 8k i need another car, does any one have anything to trade swap etc?

Please have a look through this thread guys it has more info on it there > http://www.calaisturbo.com.au/showthread.p...566#post2540566

[FS - VIC] Turbo SL ($SWAP) For Sale? Or Wanted? FS Price/Amount SWAP State VIC Short Description for title? Turbo SL Genuine Turbo Motor? A8? No Transmission? AUTO Currently Registered? Yes REGO/VIN Number? UHA086 Contact Info Other than this Forum? Check details below Description Hi guys i have a 1987 VL SL Turbo for sale or trade / swap new rebuilt turbo spec series 2 block - $3250 standard nissan hiflow turbo - needs oil seal replaced New T3/T4 hi flow turbo comes with car cost me $800 its internal wastegate. New 3TA computer - $160 Brown top turbo injectors New rebuilt jatco auto - standard shift im sure - $2100 New rebuilt full locked diff - $880 New custom tail shaft $500 FMIC + 2 afm's Vt interior - front and back Autometer boost gauge Paint resprayed 1.5 years ago New genuine bumpers Genuine holden headlights New calais tail lights Gps tracking device New alpine speakers Amg 17s or stockies ur choice —---------------------------------------- Ex calder car reg runs out end of this month Engines not run in yet , under 500kms old it has a air flow meter issue atm theres a spare there i dont have time to finish this beast due to bubs ------------------------------------------ im looking for any offers or Im also interested in a TRADE / SWAP with cash my or your way ALL offers considered guys dont be shy :0 pics can be sent to phone straight away txt me first 0420603297 Car located : Wodonga 3690 Cheers Rob Calais Turbo forsale forum thread for this car is here http://www.calaisturbo.com.au/showthread.p...566#post2540566 Photos are in this folder > http://s136.photobucket.com/albums/q192/ho...000/VL%20TURBO/

Lol dood i dont think people have had a good read at this topic. Mate unfortunatley you cannot use a apexi power FC because it doesnt support automatic gearbox intergration. You could try wolf3d im stuck in this situo as well. Too head you in the right track you will have to have a piggy back ecu or Use another ecu for Fuel and Ignition and use the standard ecu to run everything else. Also try a nistune supplier http://www.nistune.com/workshops.html

Damn i hope im not stuck with my Wolf3d V4 plug and play ecu i bought lol . I have a auto box too. I told the wolf3d tuner Trevor simkin in shepparton victoria, that i have a auto and he said no probs ????

Bump anyone lol??

SOLD PLEASE CLOSE THREAD

Can anyone do a update on this thread IE: Pics, installing info etc etc Can i still use the standard shifter ?? I like the look of stealth

Hi guys i trying to get the demensions is a round 1200 L x 500 H x 700 W and weight 30kgs plus or so and help would be appreciated . Im trying to get a Bootlid and spoiler from bayswater north to wodonga 3690 with trans direct Thanks Rob

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...=STRK:MESELX:IT

i put them on ebay if anyones interested i put starting bid is $100

bump

Nice cheers Talbo im going down this road now in getting a lid

$280 ono?

Bump

Its alright i just though the australian guys could help you out. And i thought i may as well post the whole information from the manufacturer.

I sent a message to the australian one and he said buying through him is fine. Its here and here's for the ADR question. Warning if your HEL brake lines do not include a black stamped sleeve with the following lettering HEL-ADR or HEL- FMVSS-106 they are not street legal and do not comply with the Australian ADR requirements. Despite what some overseas sellers and UN authorised Australian dealers proclaim, they will not meet the Australian ADR requirements without the inclusion of these boots. This also means no Insurance coverage in the event of an accident. Only Hel Performance Australia and its authorised dealers provide ADR approved street legal brake lines, which must include the HEL-ADR and or the FMVSS-106 black boots on each line. Hi Robert Thank you for the email, yes we would be interested in providing you with our brake lines, unlike the over seas suppliers ours are labelled to meet Australian ADR requirements. Regards Dean Morris HEL Performance Australia P.O. Box 1078 Nathan Street Brighton QLD 4017 P.h. 07 3869 3016 Fax. 07 3869 0704 www.helperformance.com.au Email:[email protected] Brake Later Stop Quicker