SKYNET

...do you mean turning both outer locking nuts clockwise so they compress the spring more??? is it safe to adjust the lower section at all??? [that connects to wheel hub,etc]

...now $150

bump

thanks for all the advice these pics r from when i did a test fit as u can see they need to be adjusted at least a few inches i set the coilovers up tonite ready to chuck on next weekend adjusted the springs so there at there max height but still captured/not loose but only gained less than an inch should i loosen off the lower locking ring and unscrew the bottom section to get more height??? dont want the car to sit too low cause my mid muffler hangs low already-want to keep it legal is 10cm the legal limit from road to bottom of exhaust in QLD???

thanks R.C i did search but didn't find anything reliable

Throw me some more offers!

I've got a set of new HSD "TT" street coilovers I can fit them myself but how do you set them up [on the car] so there all the same height? I've set them up them so that front/rears look the same but when i fit them there going to need to be re-adjusted Do measure the distance from top of gaurd to ground/take wheel off/adjust coilover/lower/measure/repeat till fronts/rears are the same???

Coverplates are SOLD pending payment

Stock 2.5" dump/frontpipe/cat converter from r33 gtst/RB25det now $70 ono

$300 ono

theres a set on boostcruisin.com atm-dont know who's sellin em though

Also have these-can sell seperately...$100 ono Stock 2.5" dump/frontpipe/cat converter from r33 gtst/RB25det Will also fit r34's & series 1 & 2 Stagea's Can send with aussie post or pickups from Maroochydore-Sunshine Coast-QLD PM to contact

Can deliver up to 150 k's from sunny coast for extra fuel $

These pics were taken tonite...$350 ono

Near new Technics SH-DJ1200 mixer is SOLD

All serious offers will be considered...$400 ono Getting a full turboback system so this is up for grabs ...X-Force 3" stainless steel exhaust with mid muffler-cannon has 3" inlet/4.5" outlet Will fit straight up to Nissan s14/200sx or r33 Skyline Should fit s13/s15 [might need slight modification-not sure] will also fit r34 Skyline's & Stagea's ...It's actually a s14/200sx exhaust but i had a new 25cm mild steel extension pipe[not the decat in pics] made so that it fits my r33 gtst Skyline-its doesn't knock on chasis at all & fits well In pics cannon is sticking out too far but that was fixed after i swapped the decat for shorter section of pipe ...Pics of it on the car were a test fit It's on my r33 now & fits well-send your email address for current pics Also will fit most other cars if modifed ...GOOD POINTS...gives more power-no leaks/cracks-welds are allgood-mid muffler takes out the drone/not annoying on long trips-it hasn't been used for long/stainless has hardly discoloured yet-easy to fit yourself-light weight-not too loud on idel ...BAD POINTS...has scrapes/scratches on mid muffler & cannon-slight dent in muffler tip but hardly noticeable Can send with courier at buyers expense-contact me for an accurate qoute Pickups from Maroochydore-Sunshine Coast-QLD-4558 Will deliver within 150 K's from Sunshine Coast for extra fuel money PM to contact

Gotta ask-why does it have to be an auto?

PM sent

Also have another black Technics SH-DJ1200 mixer i'd sell $200 ono it has some scratches & marks but is otherwise in good condition everything works-just needs a new crossfader which costs about $70-$90 online It's now missing a line/phono gold switch but you can still move the base of switch[just underneath faceplate] with a bit of plastic the crossfader works but leaks sound - power cord's included The gold paint on the EQ's & trims was almost worn off so i chucked some stickers on them This is a basic scratch/DJ mixer Was the only model allowed to be used in the DMC world championship comps for years until they changed the rules Good to learn on & easy to do tricks/effects cause everthings close together

The dump/frontpipe would fit to an r33 rb25det though right? then the rest of the piping could be modified-thats what i've been told anyway

Need these gone by this weekend

SH-DJ1200 mixer pic isnt of actual item but mines in the same condition dont have my digi camera atm but can get pics of if to send before selling All other pics i've added are of the gear im selling

Are either of the space savers wheels 17" ?

PM sent

How long is it & where are located?