international B

if its the rubber disk there are a bunch of metal replacements to be had on ebay for around $30us

If you are refering to the u-joint in the steering colum, s13 will work just fine. That rubber disk is also the same as s13.

Should be a switch next to the mirror adjustment. Is it missing?

sweet! im the same height, thats the answer i was hoping for!

I have a Cobra Suzuka bucket seat I want to put in my ceffy. It is a wide width, side mount. Anyone know of a low rail set that will work? thanks, Aaron

yeah, I have the brick headlights as well as the 3 oem grills. Since we never had cefiros here, all of my chassis stuff is S13. I agree that the projectors suck at night, especially when its wet out. here is a pic from when i had the bricks on

thanks, very hard to get the car period, reg is nearly impossible to do 100% legally. yeah, I drive it almost everyday.

I finally got mine into something that drives, so here she is... 1988 A31 Cefiro Engine: R32 GTST RB20DET stock turbo, front mount IC, custom 3" stainless exhaust, race muffler and race cat TRANS: R32 GTST 5 speed custom 1-piece driveshaft. (can't get the parts here to make a proper 2 piece) Nismo 2-way Megan racing s13 "track" coilovers 12k front 10k rear Z32 brakes Ichiba 5lug hubs Rota G-force wheels 18x9 +27 w/5mil spacers all around unknown body kit R32 gts front seats Defi gauges electric power steering from Toyota MR2 Apexi Power FC here are some pix.

I will look on the car tomorrow and post it up.

i can get them here in the us. It seems that they were around $25usd each brand new. It does seem silly to ship them to you guys, but i can pick them up off the shelf at the local parts store. Open and closed length are identical to the OE nissan ones. Let me know if anyone is interested.

yeah, its pretty useless.

glad you got it sorted!

Confirmed. I am running a complete S13 suspension, top hats and all in my Cef. I currently have 12kF/10kR Way too stiff for almost anything.

im in the Bay Area, CA

NIce Pix! I have the other ceffy in the us. I will be posting up some pix soon. Where in the states are you ?

yeah, gets its power from the other fuel relay next to the ECU. It is also fused, 10 amp, in the fuse box under the dash. Id check and make sure you have good ground and power at the pins. If you have something loose it will keep tripping the relay on and off. good luck.

thanks everyone, had my buddy in japan pick one up for me!

Thanks guys. Im on the lookout!

i'm looking for a cefiro grille like the one in this pic. Anyone willing to ship one to the us? Let me know how much. Cheers!

I've seen alot of discussion of swapping for r33/s14 LCA's/ball joints, but nothing about a replacement from another model. I'm in the USA and need to replace my front ball joints as they are shot. Can anyone confirm if they are the same as the S13? thanks!

pm'd about the stock rb20det shifter...

Awesome! where in the states are you ?

Its a RHD ceffy from japan. Not too easy to get it here into the states, but here it is. The car originally had a rb in it, but at some point, someone put in the sr. the engine i got with the car (not in it) is a RB. I already own a club K's s13 with a redtop sr in it, so i figure i will just roll with the rb20 in the ceffy for now.

I'm in California, near San Francisco.

I just got a ceffy in the US. The car was originally equipped with a rb20det, but at some point someone fitted a SR20. Im in the process of re-fitting a rb20 from a R32, and I need alittle help identifying this box> what does it do and where does the other end connnect? There is one on the engine harness from the R32, but it is cut off, and the one on the cefiro is intact. Can I just leave the one on the ceffy and be fine? also, im missing a shifter. Are there any other cars that the shifters can be fitted from? Cheers! and thanks