Outblast_32

looking for a quik sale guys! Bumpz

R32Gtst Late 1993 180.xxxKs Manual All power options inc. sunroof serviced every 5000ks Rego till June i believe turbo this is the deal atm! $9000 with everything $8500 with Kakimoto catback removed and 3inch mild steel catback installed $7000 with no Gramlights or kakimoto catback (stockies will be provided and mild steel 3inch catback) Mods: 3A Racing Air filter JJR Split dump pipe HPI front pipe standard cat + test pipe Kakimoto regu 06&R cat back Splitfire coilpacks ISC N1 coilovers Cusco castor rods Kazama tie rod ends JJR front camber arms Hicas lock bar installed + all lines removed (15-20kg all up) Cusco 3 way rear strut brace Nissan standard front strut brace Road & Race 4wheel aligment Exedy Heavy duty clutch Nismo reinforced clutch pedal bracket DOT 4 fluid flushed throughout all the lines Nismo Radiator cap Nismo Oil cap Excedy small battery Full coolant flush throughout the cooling system Dba cross drilled and slotted rotors FRONT Dba vented rotors REAR Bendix ultimate pads all round Break fluid flushed with DOT4 fluid through every corner Gramlights 57D 17x9 +22 offset all round in matte white finish Falken Azenis RT615 225/45R17 at FRONT Yokohama A.Drive R1 235/45R17 at REAR Rear fenders have been flared to clear the wheels, while this was being done the paint cracked on the rear fenders, as i was planing to respray the car i primed up the right hand rear fender, roof, rear bar, side skirts and also a section of the left rear fender! didnt do the whole left rear fender as there is a tiny lil rust spot that needs taking care of! Before roof was primed Note the side skirts and rear pods aren't on in the pictures but they will be gone together with the car! PM if interested and/or looking to negotiate!

does nobody here know??

Hey guys i have been wondering for awhile about what the difference between the RB20DET head is on the NA version and also FI version! i knw the cams on NA is slightly bigger but wat about the rest? and is the NA head compatible with FI block? i beleive it should be as they are both RB20's but would just like to confirm. thanks

Need both passenger & driver side door hinges and also a passenger side door lock (not the one the key goes into but the one that actually shuts the door and holds it shut) must be in good condition and i would rather pick up or meet half way if the distance is to far to drive! need it kinda asap! cheers

HI guys got a set of r32 Gts-t coilpacks for sale ( 6 ) items are in great condition and reason for sale is got an upgrade. Selling for $150ono pick up or meet half way! Cheers, Pat

bump

Bump

Bumpity

Item 1 Item:Repco 127 Piece tool box Price: $800 ono (they retail $1050 Brand new) Condition: Good Condition of sale: Pick up or meet somewhere local! Item 2 Item: Bilstein Shocks & Springs for R32 skyline Price: $150 Condition: Dirty but good (been driving on them recently no leaks or sagging) Condition of sale: Pick up or meet somewhere local! Fronts are on the left hand side of the picture. (abit dirty but once washed will look like new ) All items located close to Liverpool! Pm if interested!

Selling my R32 Gts-T since i have recently become unemployed and in need of the money! 175.XXXKms Has all power options inc. Sunroof + Rego till June 2010! real fun car to drive around and perfect for anyone looking at having a car that can drive on the road yet hold its own at the track. Price set at $10.500 Firm Service: Every 5000Ks Engine oil Oil filter Cooling system flush Dot 4 break fluid and flush all lines Tranny fluid Engine bay degrease Exide Drycell small battery Exterior: Stock S2 bodykit Interior: Nismo Gear knob Nismo Radiator cap Nismo Oil filler cap Audio: Random JVC head unit - been on since got car Suspension: ISC N1 coilovers Hicas canceller rod & All lines removed Cusco rear strut bar (3way) Nissan standard front strut bar Cusco rose jointed castor rods Dba cross drilled and slotted front discs Dba vented discs rear bendix ultimate pads all round Kazama rose jointed tie rod ends JJR camber arms Wheel n Tyres: Gramlights 57D 17x9 +22 all round in matt white with RT615 Front and A.drive R1 Rears Drivetrain: Exedy heavy duty clutch Nismo Reinforced Clutch Pedal Bracket Power: 3A racing air filter JJR dump/screamer (will also come with a normal dump if requested, just needs a lil modification) HPI twin down pipe JJR decat (also stock cat) Kakimoto Rego 06 & R cat back All parts installed on the car were put on brand new since i bout the car! I havent even clocked 10.000ks since i took ownership so it is quite sad to see this car go, but i have recently becom unemployed and there for i need the money to keep on living with my expences I have most receipts for everything thats on the car which will be supplied to the buyer if requested.. Car was serviced this last weekend again and will also be service b4 it gets sold if buyer requests. Wheel alignment and Hicas lock bar were recently installed @ Road And Race Performance and i also got all the hicas lines removed! This car was being built for track/drift work while still being able to drive on the street all it needs is abit more power for them HP junkies out there but in my hands i beleive weight reduction and a good suspension setup is better then boosting the hell out of the car so there for its pretty standard motor wise For anymore info just Pm me or send an Email to [email protected] Other wise just call or text 0402558948 Thanks, Pat

Hay guys just looking at getting a pair of R33 Front Lower Control Arms and a R32Gts-T diff (locked preffered). if anyone has any just pm me a price! Cheers, Pat

Well since im selling the car, im parting out with afew bits and pieces and if they end up selling the car will go abit cheaper! The suspension bits are all new in the box! Zeta 2 is used and has a lil tear which u can see in the picture above. Exhaust is 2weeks old, and was purchased for 1100 brand new. and wheels and tyres were purchased around a month ago so still plentyof life in them tyres All items located in Sydney! Pick up preferable but can organise something else if necessary! Hicas Lock bar - $80 (no picture available but just google it) Kazama Tie rod ends - $300 Cusco Castor rods - $400 JJr Camber arms - $450 Kakimoto Rego 06 & R Cat back - $900 Bride Zeta II - $450 (no Rail) Has small tear Gramlights 57d 17x9 +22 with Falken Rt615 225/45R17 and Yoko Adrive R1 235/45R17 - $2600 (plenty of tread left) Brand new SS Decat pipe (3inch) - $60

bump

Car is officially for sale guys! Selling the car with all the goodies for $12.000 or with no wheels for $9.000! car needs to be gone by the 8th of october.. need the money for next project which is waiting to be purchased send me a pm with any other offers! cheers, Pat

$12.000 ono with no gramlights

Hey guys just putting an EOI on my car.. late 1993 Nissan Skyline R32Gts-T 172.xxxKs ( got the car with 166.xxx) Service: Engine oil - Valvoline Oil filter - Ryco Cooling system flush [ works wonders ] dont remember wat brand i used :???: Dot 4 break fluid and flush all lines - Castrol Tranny fluid - Castrol Engine bay degrease - $2 can Exide Drycell small battery Exterior: Stock S2 bodykit Interior: Stock cept for Bride Zeta II bucket! (not fitted) - has lil tear on it! minimal tho.. Nismo Gear knob Nismo Radiator cap Nismo Oil filler cap Audio: Random JVC head unit - been on since got car Suspension: ISC N1 coilovers - 5000Ks old Hicas canceller rod (not yet fitted) - New still in box Cusco rear strut bar (3way) - 2000Ks old Nissan standard front strut bar - since car was made lol Cusco rose jointed castor rods - New still in box Dba cross drilled and slotted front discs - 5000ks old Dba vented discs rear - 5000ks bendix ultimate pads all round - 5000ks old Kazama rose jointed tie rod ends - New in box JJR camber arms - new in box Wheel n Tyres: Gramlights 57D 17x9 +22 all round in matt white with RT615 F and A.drive R1 rears - 2000ks old Drivetrain: Exedy heavy duty clutch - 15.000ks old i beleive Nismo Reinforced Clutch Pedal Bracket - 3000Ks old roughly Power: 3A racing air filter JJR dump/screamer (will also come with a normal dump if requested) HPI twin down pipe JJR decat (also stock cat) Kakimoto Rego 06 & R cat back The exhaust system is all new pretty much just put around 1000ks on it so far! Everything on the car is brand new if not just under 6000Ks old! car was purchased at start of the year but has only been driven for 6000Ks as it was unregoed for awhile! did a service wen i bought the car, did one 4000ks after, and will be duin another service soon! car has a lil rust spot on passenger side quarter window and guards have been rolled to fit wheels! paint cracked around there but i wasnt fussed as plan was to go widebody at end of year or so anyways! bsides that the car is in decent condition for its age! Plan was to build drift/track car, as you can see the suspension setup is nearly complete as breaks aswell! only afew things left to finish in those areas! since i bought the car ive spent round $9000 Inc rego (which should last till april next year i think) got receipts for everything i think, just gotta look around! all parts were also purchased brand new, except for the Bride seat. Im looking for around $15.000 with everything.. Keeping in mind i try and get only the best for the car and if someone was to buy all these parts and a stock r32 it would maybe cost much more! Price is Negotiable on separation of items! no rush to let this car goes as im just seeing how life carries on... Also open for swaps for something N/A driving this to city and back to livo everyday does become a pain and fuel consumption for an apprentice that makes 300 a week isnt easy LOL... Now P.S no time wasters Pm offers

wen he 1st got the car it had cat back, pod, afc and did 168KW atws. and after the rebuild and charger it did 275KW on a conservative tune! has potential for more, but rather run safe then sorry! also car has been detuned to 260kw atws so do the maths

could u pm me afew pictures please! thanks, Pat

no one no anyone that has 2nd hand seat rail for sale??

bumpZ

hey guys looking for a Bride FG-type Seat Rail to suit Zeta 2 bucket seat! so its the side mount type! if anyone has anything like that let me knw! and preferably in Sydney as i rather pick up thanks, Pat

^ agreed! couldnt put it better man

Well i can vouch on how they stop on the street! very good!! as ive been in the car and felt it myself.. and Alan, just because he is selling the car doesnt mean he doesnt love it, just time to move on! he has his reason's for doing wat he wants to right?.. if i seriously could afford brakes like that for my car, trust me i would buy them! When people have love and taste for something they get the best for ther ride regardless no?? or do u buy rays engineering wheels just for the look and not the quality of the wheel and weight, sizes etc?? so yeah all in all man, if he wants to buy a 20g body kit or 1g set of wheels thats up to him! all i gotta say Kareem, is that you did an awesome job with ur car and i love everything about it cant wait for wats next bro gl with the sale peace

bump