Jump to content
SAU Community

freestyleMX

Members
  • Posts

    187
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by freestyleMX

  1. R32 ecu with Nistune board installed has a good base tune so will save money when it comes to tuning works perfectly fine only reason for selling is moving in a different direction.. $600 loacated in s.a can post at buyers expense.. Nathan 0431048440
  2. came on a motor i recently bought was told running perfectly fine only reason motor was removed was for 25 to go in roughly 100xxx km
  3. also have. RB20 Stock Turbo actuator (run 10 psi on rb25 just by bolting it on) $50
  4. RB20 coils $100 Resistor pack for GTR injectors $50 Z32 AFM Plug $25 RB20 Green Label AFM $50 Standard RB20 Injectors $50 (came out of running motor) Located in South Australia can post at buyers expense Nathan 0431048440
  5. got 6 r32 gtr injectors came out of a running car. was going to put in my rb20 but now going in a different direction and need bigger injectors.. $300 South Australia can post at buyers expense Nathan 0431048440
  6. contact nathan 0431048440
  7. got 6x rb20det coilpacks came out of a good working engine $120
  8. no and no new nismo cap have been loosing water its been spitting out the overflow
  9. brand new nissan water pump maybe 3 months ago and tested the thermostat in boiling water and is working
  10. i did what he said in regard to bleeding it yesterday but still no difference..
  11. only gets really hot if giving it a hard time.. did it again today even tho it was a hotter day (30C) wont get hot from normal driving
  12. ok did a comp test only had a quick chance to do it so couldnt do a proper one so only got to do it cold and dry.. results cyl.. 1 - 145 (had the most oily moisture) 2 - 140 (had a bit of oily moisture) 3 - 138 4 - 135 5 - 135 6 - 140
  13. update.. ok so took out the plugs this morning. all the plugs looked a coppery brown color all consistent with eachother. looking into the bores cylinders 1 and 2 had a light layer of oil on them where as all the others were a dry black.. i noticed the car has been using a bit of oil as of late. i have a dual catch can setup and have noticed that enough oil have been getting past my first catch can and accumulating in my second can as of late when going for a hard drive! i'v heard that rb20's crack ring lands? just an idea as its only between cylinders 1 and 2 only...
  14. this is what i was thinking but when the engines running theres no bubbles in coolant or smell of exhaust.?
  15. im sure this topic has been hit upon before but i have not found one that specifically covers my problem.. so first off my car r32 gtst mods. 25 turbo split fire coilpacks cooler exhaust nistune alloy radiator thermo fan catch can problem #1.. my car has been pushing water bubbles into the radiator overflow bottle after i turn it off after a normal drive. and if i go for a hard drive and push the motor a bit say straight after pushing it i pull into a car park leaving it idling the temp on the stock gauge will go up into the h. so i turn the car off (normally not good idea i know) and then restart it a couple mins later. when i do gauge reads normal (halfway) my theory is theres an air lock and when the gauge is reading hot its just cause theres no coolant in the pipe that has the sensors in it..? the car runs fine while all this is happening btw! problem #2.. in the mornings when i go to start my car it will run on 4 cylinders for maybe a min then pickup one then a few seconds later pickup the last and run normal. (this problem has only just started maybe a month ago) now for all you that will ask no normal signs of a BHG water doesnt have oil nor does it have bubles while engine running oil is black with no signs of water. havent had a chance to do a compression test as my mate has my tester atm so just to clarify car drives fine engine runs great outside of these problems even on a warm day giving it a bit it still wont get past halfway on the gauge.. and please no smart throw it away get a 25 etc comments i like this motor and just want to get it running sweet! but im stumpt hopefully someone can help me out here thanks
  16. surely someone wants these...
  17. Nissan R33 NA Front brakes - rotors, calipers & brake hoses.. rotors are 280mm in great condition with minimal lip. stud pattern is 4 x 114.3 twin piston calipers these make a great upgrade for r31 skylines... also fit other cars with modifications $230 Nathan 0431048440 S.A
  18. Got a pair of R33 Lower Control Arms sitting around, ball joints in good condition no rips in boots.. $150 Nathan 0431048440 S.A
×
×
  • Create New...