Jump to content
SAU Community

Deez and Teez

Members
  • Posts

    10
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by Deez and Teez

  1. Hi everybody. I am currently doing an engine rebuild and decided to swap out the o rings and seals for the front diff  as I’m certain they were never swapped. As I was tapping out the sleeve for the shaft the socket jumped out and I sent it home. My question is, would it be ok to file the edge of the gouge and leave it as is? I see that the diff fluid travels down the sleeve and is sealed on the other side. Has anyone ever made this mistake?

    IMG_4199.jpeg

  2. Hello everybody!

    I need a bit of help. I am helping a buddy out with a misfire on his 90 GTR and I hit a wall. He was getting a pretty bad misfire around 3K rpm. All of his spark plugs and coil packs are fine. I swapped his coil loom with mine and that did nothing. I did find one bad injector and changed that out. That did help but it is still misfiring. I also used my igniter chip and AFM's on his car and nothing changed. The next item I am going to check is the CAS. We also checked for air leaks but it is boosting fine. Any suggestions?

    :thanks:

  3. What happening everybody. I have a 90 GTS-4 with a 26 swap. Recently she has been running pretty rich. I can smell gas inside of the car from the exhaust. I took off both MAFS and cleaned them out with a little carburetor cleaner but that didn't help. Do you think I just need to change them or is there something else I should be looking at. Thanks in advance!

×
×
  • Create New...