OutZero

how many of these intercoolers have u got? Thanks

could u send me pic's to harris@ozzienet.net and how much use has it had? Thanks

i seen this on ebay the other day so for all you people who are after a turbo to upgrade there skyline or VL or any other car that has a T3 internal wastegated turbo these turbo's are perfect http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...me=STRK:MESE:IT

i can do a brand new 280hp Dual BB turbo for $1000shipped to your door, the s15 turbo's are only like 260-280hp Thanks

i can get u one that isn't 100% bolt on need a t28-t3 adaptor flange for $1700shipped to you rated at 450hp email me at harris@ozzienet.net if your interested Thanks

what other throttle bodys would fit onto the same stuf pattan as the XF one?

any idea how to calibrate it?

I just finshed installing a custom plenum and XF throttle body onto my car, i wired up the TPS to the WOLF3D, i also have a avcr i got the hand controller of the wolf and put the AVCR onto the throttle screen, and depending how i had it wired up it normaly sat on 22% when my foot was off the throttle and then like 60% once i put my foot to the floor, and the AVCR went from like 45% - %60 they both where all over the place, they use to be pretty much spot on with my old TPS, i know i will have to edit the wolf to get it to be right tho my AVCR is always going to be out? is there any other TPS that will fit onto the XF throttle body i heard people using WRX ones and stuff like that? has anyone has any problems like this before if so reply here or email me at harris@ozzienet.net here are pic's of the setup www.osturboparts.com/plenum Thanks

i got a hybird T3T4 with internal wastegate T4 flange rated at around 450hp should give u 260rwkw's easy asking $1099shipped brand new email me at harris@ozzienet.net if ur interested

i got a garrett GT25/40 for sale for $1750 brand new still under warrenty

say 25psi easy and just a custom dump pipe for some reason i can't post in this forum anymore so if u want any info email me at harris@ozzienet.net

yeah it is a wierd wastegate setup they are called a swingvalue because most aftermarket T3 flanges turbo's don't have a internalwastegate moluded into there exhuast housing, even the GT30 if u get it with a T3 flange to quit internal wastegate needs one of these on the back to make it work, tho they seems to work fine Thanks

This is a brand new T3/T4E hybrid. It has a 57 trim compressor wheel,50AR compressor housing and 63AR turbine housing with a stage three turbine wheel.It comes with a 10lb adjustable wastegate. i have 2 of these turbo's one is oil and water cooled one is just oil cooled, they are a drop in replacement for all skylines and any car with a internaly gated T3 turbo, they are rated at around the 500hp mark only thing that needs changing is the dump pipe i have 3 other people who have installed these turbo's onto there skylines and are very happy with the responce and power i was going to install one of these onto my car tho after crashing my car i need to sell them asap asking $1000 each cost me $1500 each for more info and pic's email me at harris@ozzienet.net Thanks

idunno if this is write tho it is a 7 blade compressor housing?

no idea what trim it is or how many blades it has u talking about compressor or exhuast blades? Thanks

yeah i'd say it would do that Thanks

i can also get one of these with a .68 exhuast housing a alittle bigger compressor wheel if anyone is interested Thanks

should make upto the 250rwkw's i'd say tho it all really depends on ur car and how it is tuned and setup Thanks

sent

ok sent

100% brand new never been used so it is a new turbo so there is no shaft play

it is internal wastegate and give me ur email address and i will send u pic's when i brought it i was told by the people who built it that it should do 450-500hp Thanks

i got a garrett T3/T04b custom turbo, brand new it is oil and water cooled roller bearing the info for the turbo is T3 To4b . The compressor wheel is a 54 trim and the compressor housing is a 60ar . The turbine side is a 48ar with a standard T3 flange. this is pretty much a bolt on for a skyline rb2*det engines and also a VLT or anything with a T3 flange that has oil and water cooling, only problem is that the exhuast flange going to the dump pipe is different tho most exhuast can be modifyed for very cheap i am asking $950ono for the turbo if u would like pic's or more info please email me at harris@ozzienet.net Thanks

i got a garrett T3/T04b custom turbo, brand new it is oil and water cooled roller bearing the info for the turbo is T3 To4b . The compressor wheel is a 54 trim and the compressor housing is a 60ar . The turbine side is a 48ar with a standard T3 flange. this is pretty much a bolt on for a skyline rb2*det engines and also a VLT or anything with a T3 flange that has oil and water cooling, only problem is that the exhuast flange going to the dump pipe is different tho most exhuast can be modifyed for very cheap i am asking $950ono for the turbo if u would like pic's or more info please email me at harris@ozzienet.net Thanks

atm only edgle H-beam tho if u want something esle i can ask if they have it,