andogtr

Heres the link to the dyno run on saturday

Charge $100 p/h for dynoing done about 50 pfc s over the time and only need 1 days notice for booking not sure on how many hours it woud take about 4 to 6 maybe

Well Curtis you are getting some were sounds now like the tune and fuel pressure need checking i actually dyno tune and fault find for a living done alot with pfc s if you need to run it on our dyno we are in ulverstone at southside on 64259320 your only in burnie arnt you so wouldnt be much of a hassle to look at your car for you Cheers and good luck

Is the pfc software set to the z32 afm make sure the plug gap is .8mm and check if the wiring to the z32 afm is right you can read the plug wrong from left to right had a car in the other day with same problem all it was was the afm wiring was wrong if ths is all ok check fuel pressure and the tune

Dyno day Southside performance 4 Dysons lane ulverstone 64259320 2wd only SAT 17 TH DEC 1 pm start $ 80 if any skylines want to run will have to take front drive shaft out can do it on the day at the shop

Made 580RW KW at GT Garages first dyno comp a while back. Slowly getting the old gtr back on the road again here are some parts ive collected over a bit of time Direct twin plate clutch Caple motorsport plenum with 102 mm throttle body 290 11.5 cams with oversize supertech valves and double valve springs bRAND NEW NISSAN HEAD Ross metal jacket with new crank and cam sensors does away with std nissan CAS also brackets and pulleys for dry sump set up 50mm pro gate 2000 fuel Nitto DBS headgasket 10.5 to 1 comp JE pistons 2000cc injector dynamics injectors and rail kit 60 psi EBOOST 2 with 4 port solinoid Got coming A GT55 turbo Kernen manifold

wanted rb 26 head in real good condition ph 03 64259320

G Day there yeh looking for a good std head or a good modified head long as it passes the hardness and pressure test and its straight did you sell your good head

Hopefully about 3 months Rob bit like you had a bit of bad luck with a few engine problems but hopefully got a combo now that will not fail changing alot of the set up this time It all takes time money and motivation and learning the hard way hope you get yours sorted this time

Has any one got a good rb26 head for sale as im in the build again with my car the last head went really soft and kept lifting the head and blowing head gaskets it probly didnt like the 43 pound boost i ran through it at GT Garages first dyno comp Also is any one interested in some really good piston sets we are getting custom made at cosworth in the UK the will be the same design as an F1 car very strong we need to order 10 sets to get this to happen they will suit rb engine 86.5 mm at 10.5 to 1 compression ratio I think we have finally worked out with the 26/30 build what works and what doesnt work to make them very reliable and strong

Well the dyno wasnt there because gup only rang me 2 weeks before the event to see if i wanted to do it yeh only 2 weeks so he didnt realy know if there would be a dyno or not at the event after advertising it would be there i said we would do it for a very reasonable price and he wouldnt pay the money . Especially after he made alot of money out of this event very poor

There is not going to be a dyno there this year

What is the progres with your car Rob

yeh interested