SinStag
-
Posts
23 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by SinStag
-
-
Hey guys, had to post up a statement of love for these forums. This all happened to me a few weeks ago while giving a bit of a squirt.. basically stalled at 80 and i was stuck on the side of the road. jumped onto SAU on the phone.. search.. wallah I read about this common AFM issue.. unplugged it and it kicked over first go! limped my ass home and ordered a new one using the model codes from this thread and I was back on the road in 4 days (including weekend). Any other car with a poor aftermarket following would have no forum support, and would be stuck waiting for NRMA or a tow truck.
In case anyones interested in another source for this AFM.. try www.CyberspaceAutoParts.com.au
I got the sensor for $220 + delivery.. much better than $307 and 2 weeks from Nissan!
Cheers
-
Ok so I got some codes:
0335 - crank position sensor A circuit malfunction.
0340 - cam position sensor circuit malfunction
Are these the sensors you were talking about Jetwreck? Will these need to be replaced then? If so which are the best import friendly dealers I can get these from? Would these be a DIY job or best for a pro to do?
Sorry for the barrage of questions lol
-
Hi guys, thanks for your replies. I hope its not the battery, I've got an optima yellow top in there and its only been a year.
I have been hesitant to crank it too much, I've read this can be bad for the starter and will shorten its already short life. I'll give it a go in the morning and see what happens. Will also see if she spits out any codes at the same time. Will be my first time reading codes, hope I'm accurate.
Yep, prestons is just a stones throw away from me. I'll let you know how she goes tomorrow.
Thanks again
-
Hi guys, I've been reading on here for the last 3 days trying to find a reason why my Axis won't start. it has similar symptoms to 3pointJ who's also posted on here, I started the car as normal one morning.. 5 secs later it turned itself off... now it just won't start. I've tried resetting the ecu (although didnt check for fault codes), I've taken the AFM plug out and tried to start with no joy and I've disconnected the battery for a full day and still no luck. there is 3/4 tank of premium in it and it was serviced not too long ago. I did have a problem a few months back where it stalled randomly and wouldnt kick over right away. after turning off and turning back on again it started but took longer cranking to get there. since then it has taken this same longer amount of time to start but has always started. I took it to my mechanic to get it repaired but he couldnt figure it out, would it be better going to an auto elec? seeing the car is basically a computer with an engine and wheels..
any thoughts?
cheers for any help
Joel
-
something like this happened to me the other night, randomly stalled then very hard to start afterwards. still takes a while to kick over at every start, but seems to run ok while driving. I'll have a look tomorrow and try find anything loose
-
I'm down for this! Hopefully can get some more mods done in the time to this event..
-
what is the rim size and offset .................20X8.5" +30????
to be honest I'm not really sure what the offset of these rims is, or the actual rim width either. I do know that the tyre is 225 though lol.
it was basically a off the shelf purchase, didnt put much thought into it as I just wanted a nice set of rims rather than the gutter bashed stockies. in hindsight I should have researched ideal offset, width, dia with a decent tyre and talked to import monster for a nice set, but instead I got talked into something that probably wasn't selling so well with a set of tyres that were the cheapest of the lot. I didnt think this car would grow on me so much..
-
I'll be joing the wheels club tomorrow. Picking up 4 big packages that have made their way from Japan! Won't have time to fit them up, so it'll have to wait a few weeks
19's SSR type F
HAWT!
-
they aren't too bad in person, the polished spokes go well with the chrome accents on the car. definitely can do better though.. maybe just get some 22's like this:
http://www.supraforums.com.au/forum/members-rides/58430-2002-nm35-autech-axis-stagea.html
-
but with some height taken out the rims increase in size.. but it becomes less practical the lower you go!
My love of this car grows everyday so it might get to a stage where a new set of rims with suspension is in order.. and some new brakes!
-
doesnt look so bad from this angle.. but from here you can see my issues with offset
-
these are actually 20".. but yes I def need larger tyres! I'm not too happy about the offset on these either... need some new 19" forgies yummmmmmmm.
my original aim with these wheels was to complement the car so they didnt stand out too much.. i guess it worked! lol
-
this is what the AXIS looks like now.. big wheels but they look tiny being up so high. would love to take an inch out of it but almost seems like more hassle than its worth. Your cars are dumped!! I couldnt go close to that
-
I'm not sure which way I'm leaning at present, I have loaded up the car with some heavy items quite a few times so it needs to stay functional.. but the look of it squatted tempts me badly! I also love being able to drive over things without fearing the usually scrapage that I get with the Supra, but I want it to have less understeer than at present. I'll wait and see how the Whiteline sway bars go that I just ordered from Daleo
-
I think AXIS is the same as any other NM35, so you should be fine with the BCs.
I know what you mean with tyres, found the same thing when I bought a car with 17" 35 series. Awful ride. Hated it. I'll be putting 18s or 19s on mine, the biggest I can use while maintaining 40-45 profile.
Funny thing is my parents have an Audi they bought with 19" 35 profile tyres, and the ride is fine.
I thought i was in the same boat as ARX owners, being that we have HICAS and the wider track and higher stock suspension. I see the 'non ARX' note on each set of suspension and so fear the worst.
what width tyres are on the Audi? If they were like 335's or something killer like that the 35 profile would be much thicker than on our 225's and 235's
I'm actually thinking to change my rims to something smaller, maybe slightly wider and definitely thicker. I hate gutter bash so need bumper bowling tyres lol
IMO it does.....low profile IMO can look better(sometimes) but does mean better handling......I don't mind having a bit of a sidewall on the tyre not only to save the rim but to also stuff around with pressures to ensure the best response from your grip level in all circumstances......a bumpy road with 35 series tyres at speed can end up pretty messy and usually slower that 45 series tyres......naturally this all depends on the tyres your running!
agreed on all counts. sidewall definitely helps keep power to the ground, look at street drag radials. they can hook 1000hp no problem.. and its street legal! If the Stagea wasn't 4wd I would love to put a fat tyre on the rear, both for ride and handling
-
Hi guys, been trolling through this thread for some time trying to find info on AXIS suspension.. but that aside. With all this talk of kg rates for fronts and rears.. doesn't ride quality also come down to rim size and tyres? I have 35 series tyres on 20" rims (came with the rims) with stock suspension. while being quite comfy it will still jar when hitting bumps and holes and will hop badly if taking a corner in a spirited manner
and hitting a bump. Shouldn't there be a balance between tyre sizing and suspension tweaking? I know when I finally get my head around this car I will definitely be changing tyre sizes (maybe even rim size) and then try to balance the suspension to suit my driving. Not that there's much selection for the AXIS So just in case I've missed something, is there anything adjustable available for the AXIS??
-
my GF originally hated my choice of a wagon.. said she would never be caught dead in it! now she drives it harder than i do! lol
-
Ok so I'm having some dramas opening this flap as well, I cant get it unlocked! other than unlocking and locking the car has anyone got any suggestions how to pop the door? i fooled around for 15 mins at my local servo last night and drove off a bit frustrated.. esp as my fuel light is on!
thanks in advance
-
got my first funny moment the other night.. driving through campbelltown on the way to the gf's.. pulled up next to a commo v6 who kept edging at the lights.. let him go for a sec then tromped all over it.. 3 guys expressions when they caught up.. priceless!
-
some interior mods: FHRX in Sydney installed eclipse 7" TV with nav + headrest units. had to install kanatech dash kit to get the double din in there, well worth it though!
still trying to work out what suspension will go into the AXIS.. tried getting jap bilstein kit but not available..?? any suggestions?
-
thanks for the welcome nick, I'm now the proud owner of the AXIS and am extremely impressed by its performance! at first I was thinking to modify suspension and brakes etc but seems there isnt really any need... dont know if i can control the modifying bug tho..
-
Hi all, just posting up a hello as I am soon to be an owner of a M35 Axis Stag. I'm kinda new to Nissans, currently modifying a supra.. but I also have an E50 Elgrand Rider on the boat over from Japan. I'm sure these forums will definitely come in handy and look forward to coming on some cruises
cheers
Joel
and hitting a bump. Shouldn't there be a balance between tyre sizing and suspension tweaking? I know when I finally get my head around this car I will definitely be changing tyre sizes (maybe even rim size) and then try to balance the suspension to suit my driving. Not that there's much selection for the AXIS 
Nsw: For Sale - 2003 Stagea Nm35 Autech Axis - A Few Mods
in For Sale (Private Whole cars only)
Posted
The time has come to part ways with my Stagea. Its been great owning this car for the last 4 years however its time to move on to something a bit more work friendly.
2.5L V6 Turbo, Tiptronic Auto, Attessa 4wd
Black exterior, Beige leather interior
121,200km (imported at 47,000km)
rego till Aug 2015 (being renewed soon)
Most basic specs can be looked up about this car, see below:
http://www.j-spec.com.au/wiki/Nissan/Stagea/M35/id-336
Some things I've changed since owning the car:
Double din TV head unit - Eclipse AVN726EA
Reverse camera
HITV head rest TV's
Optima battery - yellow top
Dynamat to front door panels
(all above work by FHRX Studios)
Cat Back exhaust
HKS panel filter
RDA front (slotted) and rear rotors
QFM HPX Brake Pads front and rear (6 months old)
Front and rear whiteline HD sway bars
Rear HD Ball Links
Heavy Duty 316L rear upper link mounts
Superpro suspension bushes
BC BR coilovers
Passenger and drivers side cam sensors
Drivers side window motor (used)
AFM
Drivers side wheel bearing
Hi flow fuel pump
I was gradually getting the car to a state that I was happy with but work commitments mean that I need a car with no loud exhaust and better ground clearance. The car has always had regular servicing either by myself or qualified mechanic and has recently had a major service including changing the drivers front wheel bearing and fuel pump\filter.
The rims have a few grinds on them which was how it cam imported. I didnt care too much as these were replaced by 20" rims soon after, but as these were horrible to drive with I decided to go back to stock.
With all the suspension mods the car really does handle well, and with a bit of engine work it could be quite a weapon. Hopefully someone can pick up where I'm leaving off.
Asking $14k neg, with 12 months rego and a lot of spare parts. No swaps thanks. Call or PM for any more info - 0417 498 943
Thanks
Joel