RS4-S
-
Posts
581 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by RS4-S
-
-
ive been prowling ebay lately for a 2 button key for my s2 stagea but just cant seem to find anything that looks like the one ive got. is it the same 8 point key and remote as any other nissan model? early pathfinder? if anyone has used an other type of nissan remote and has had success i would love to know, cheers
-
just bought my stagea last week, it had 17x8" all around (RS4 manual so no auto rear stick out) that sat way too far in and were missing centre caps, i just got some new speedy cobolts in black and in 18x8" with a et+35 offset after 4 days. soooo much better. i found out once i pulled the old rims off that they were fouling the rear struts and were 17x8 et+42 which is WAY too high. id say +35 is the highest offset i would run on a stagea. i could tuck these new rims very easily too. my guess it for a 8 - 8.5" wide rim et+28 would be perfectly flush with the body of the car. was guna go bigger but have a baby on the way so i want some comfort still.
-
ok just wana clear this up, after 40 pages i think ive got it right but just want to 100% confirm it.
-R34GTT Front and rear calipers and rotors will fit perfectly (apart from trimming backing plates and messing with the front lines) on my S2 RS4-S (manual)?
-But rears WONT fit IF it was an AUTO RS4 due to the wider track/different offset rear?
-also all 2 pot non sliding rear calipers are all the same fitment from R32 to R34? (maybe minus GTR brembos)?
-if so does this mean all rear rotors are the same too? thickness and diameter?
-also those brake supports that stop the boost flexing on the firewall all stagea can use one of R33 fitment?
-my currant handbrake shoes will work with any of the 32>34 rear rotors?
in theory if i got hold of front calipers and rotors off a R34GTT and say rear calipers and rotors from a R32/R32(nonGTR) i would have no fitment issues apart from lines and backing plates and different caliper fittings on the front?
Cheers.
-
No HICAS, yahooooo ? Hi-cas was the nuts on my 32 ! WOULD LOVE IT ON MY sTAGEA c34 , even faster cornering , if you have the C34 Jap Stag then the front wheel track is 1"narrower than the rear , my understeer even on 12" rims was horrible , 2 inch apacers to the front cured it !!
correct me if im wrong but its only the auto rs4 that has the wider rear track. the manual version or the rs4-s has same track front and rear.
Stagea Brakes
in Wagoneers
Posted
cheers heaps mate, so the fittings are the same? i take it the r33 rear lines are longer?