Jump to content
SAU Community

joshw33

Members
  • Posts

    10
  • Joined

  • Last visited

  • Feedback

    0%

Profile Information

  • Gender
    Male

Profile Fields

  • Car(s)
    sr20 1200datoskyline 33
  • Real Name
    joshua

joshw33's Achievements

Apprentice

Apprentice (3/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. iv got a r33 and i noticed the engine was idiling high its sitting on about 1200 rpm all iv got done to it is cooler exhaust 10psi
  2. thinking about getting haltec intercepter iv got a s2 33 exhuast fmic filter any suggestions would be appreciated
  3. I want to get a electronic boost controller but dont know what to get iv got a r33 with mods( intercooler exhaust filter) thinking of running 12-15 psi i was thinking about the eboost street or Greedy profec b or any other recommendations would be appreciated
  4. by the if anyone needs coil packs i bought splitfires for $570 from kudos motorsport http://www.kudosmotorsports.com/catalog/r33-gts25t-electrical-fuel-system-c-21_22_26_132.html
  5. i put new plugs in it [bPCR6E 0.8mm] ran ok on low boost but as soon as you put boost in to it it runs like shit so i tried to silicon the coil pack still no good then i went and bought new coil packs splitfires runs heaps better no missfire as soon as it comes on boost it starts pulling and then about 4000-5000 rpm it doesn't seems to pull as hard and then it starts pulling again so im thinking i might need to try a colder plug or smaller gap any suggestions would be appreciated thanks
  6. i had the same problem as soon as i hit 4000-5000 rpm it it will missfire even on low boost i put new plugs in it [bPCR6E 0.8mm] ran ok on low boost but as soon as you put boost in to it it runs like shit so i tried to silicon the coil pack still no good then i went and bought new coil packs splitfires runs heaps better no missfire as soon as it comes on boost it starts pulling and then about 4000-5000 rpm it doesn't seems to pull as hard and then it starts pulling again so im thinking i might need to try a colder plug or smaller gap any suggestions would be appreciated thanks
  7. i put new spark plugs BPCR6E and its a little bit better on low boost 5 psi its ok but as soon as you put a bit of boost it starts popping about 4500 to 5000 rpm and then clears up a bit so im going to try sealing the coils
  8. iv got a 33 s2 i just but on full exhust intercooler and boost controller i took it for a drive and it was alright on 5 psi and i turned it up alittle bit about 7 psi and still alright i turned it up a little bit more and soon as it hits boost it starts popping so i but back down 5 psi and it still doing it
×
×
  • Create New...