RBC33
-
Posts
224 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by RBC33
-
-
i made myself up a greddy one with their engine adapter and thermostat oil filter re locator with all fittings (proflow) and everything for around $500
BIt expensive but you can customize how you want it like if you dont want a oil filter relocation you can just get a thermostat block. Heaps of options.
Also random question but can you snap a photo of where your pressure line for your power steering (the one that has the banjo into the p/s pump)bolts to your chassis after it comes out from under your sub frame. Cant figure if my lines been bent retarded or i just am trying to bolt it to a random spot lol
-
as Dan_J said zac, its most likely the e85,
Usually people double their injector size when going to e85. Maybe not quite double but if they had 550's /600's they go to like 1000cc/1200cc injctors
-
Side or bottom mount?
-
Whats it tuned on e85 or 98? I thought pushing over 300kw/400hp was getting to the limit on a stock internal 25? Still nice power very nice power
-
All good I was after a manual one
-
1
-
-
What have you got done engine wise? Power figure? Love how hard it bakes
-
I txt messaged you the other day about ceffy centre console, got no reply?
-
Best ad ever hahahaha
-
Feck, do want, will try organise shipping through work
-
I'm on mobile and can't see a price even when viewing full version of site?
-
The Monroe part number doesn't work on the website? I'm trying to track a set down, might have to give them a call
-
Looks like you had a ball!
Laurel looks good too,
-
Follow this guide here, it's all in there
It's a d21 navara speedo sender they even have the part number at the start of the tutorial for the sender. It was like max 40 bucks for the sender and you reuse your r33 gearboxes speedo cog or you can order a new one I you don't have one/it's f**ked
-
yeah dude stainless manis warp real nice
That sucks though hope you get it all fixed soon.
And its not hard to convert your speedo man, i did mine took me about 15 mins to change the cogs over
-
did you end up finding handbrake cables?
Ive been searching high and low for a stock pair, was gonna get new ones made but cant get find any measurements online
-
Yeah I was dreading bolting my greddy plenum down then having to work around it, now I can just bolt it in with 2 bolts to hold it, get cooler pipes made then take it off and install the relocation. So much easier
-
Turns out a japanese 2-6 months is very short.
picked my parts up this afternoon fromt he post office, 26 days after i placed the order.
Them crazy japs and their excellent service
-
so did a bit of retail therapy. Ordered my greddy oil filter relocation with thermostat and my greddy oil engine block to allow me to run the relocator. RHDJAPAN had them at cheap prices. Turns out greddy has none in stock and its gonna be 2-6months before they do another run
But oh well i'll just have to wait for it haha cant get them anywhere else at below greddys listed price.Then went and bought new exhaust studs to replace the 2 missing, new yokes (didn't realise there was two different sizes when i made replacement at work
) new nuts and washersThen also ordered all my fittings + line for my oil cooler relocation. And also got stainless t bolt hose clamps and my last few silicone joiners i needed as well as my fitting for my turbo water line return.
I'm thinking about doing braided -10 to catch can and catch can to intake pipe as my new works going to do a run of new catch cans for 4x4s an I might get one made up with dash fittings for me. Dunno yet.
Hopefully if the rain pisses off for a while i might actually be able to work on it, been non stop here the last few weeks which was awesome. Been leaking slightly through the windscreen so the floor got wet. This car just keeps getting better lol. Lucky the windscreens being replaced
-
Curse of the laurels. None seem to get driven hahaha
-
what size is the inlet on the hks pod filter?
i'm Chasing a 4' intake
-
seat belt a front or rear? I'm chasing a drivers belt
-
are they 12mm or 14mm? sounds like 14mm which is s14 ends i think? i think mine has 14mm thread and my mate thought it should of been 12
-
Speedo is easy get a d22 navara speedo sender, get navara cog off (die grinder with cut off blade) drill r33 gearbox cog out to suit navara Speedo sender shafts size. Slide r33 cog onto navara speedo sensor shaft and use some lock tite glue on it to be safe. Put navara speedo sensor in box ad make a new sensor bracket to hold it in
-
There's a flex plate that goes between them I think. Like 3mm thick maybe? Is that what your talking about?
But oh well i'll just have to wait for it haha cant get them anywhere else at below greddys listed price.
) new nuts and washers
Am Now The Owner Of A Laurel C33
in Members and Their Rides
Posted
Ill get a picture of the bracket I mean, would be much appreciated.
Also have a look at cartel Australia's page I think they have oil cooler kits uo on their site