Jump to content
SAU Community

B33st

Members
  • Posts

    230
  • Joined

  • Last visited

  • Feedback

    100%

Posts posted by B33st

  1. Ok guys i still have a lot of this stuff and it needs to go.

    Willing to consider any reasonable offer.

    RB25 Head

    • Tomei 256 8.5mm cams
    • Tomei 8.5mm Valve springs
    • New guides & Retainers
    • Ported intake and Exhaust
    • HKS CAM Gears
    • Cam covers have been powder coated gold
    • Greddy Oil Cap

    HKS 3037 Turbo Kit

    • HKS 3037 56t .86 Turbo
    • HKS Standard 50mm External Wastegate
    • Custom Exhaust Manifold – Ceramic heat coated
    • 3.5' split dump pipe.

    Kakimoto Regu 06&R Exhaust & 100 cell high flow cat

    Oil cooler Kit

    The rest of the car is pactically complete so if someone is looking for a good base for a project i am open to offers on the whole lot... S1 R33 and plenty of good condition performance parts

  2. Hey guys, im after a few parts for my build. if anyone has any of these please email me at [email protected]

    tomei poncams type b

    sard 700cc injectors or similar

    fuel regulator

    1xbosh 044 fuel pump

    high mount t03/04 manifold

    z32 afm with plug

    oil catch can

    oil lines & oil cooler

    and if possible a garret 3037 turbo or similar or T04z

    Many thanks,

    Rob

    Heya mate

    I got a lot of these bits available but in brisbane.

    Oil cooler

    Afm and plug

    Oil catch can

    Complete fuel setup. fuel lines, surge tank, pumps, reg.

    HKS 3037 turbo kit.

    Ive also got the poncams but for a series one head. Ive got the rebuilt head and all for sale though if interested.

    interested?

  3. R33 GTS-t...

    Pretty good condition, almost complete but has spun bearing.

    Would come with lots of practically brand new performance parts good for over 300rwkw..

    HKS 3037 56t .86 Turbo

    HKS Standard 50mm Wastegate

    Custom Exhaust Manifold – Ceramic heat coated

    3.5' split dump pipe.

    600x300x76 Hybrid Intercooler

    Custom intecooler / intake piping to suit

    All Hoses / Clamps / Silicone Joins to suit

    Rebuilt RB25 Head

    This was only recently reconditioned and reassembled by Colin Lloyd Headsense. Has only been used for a total of 6 hours on the dyno since rebuild.

    Tomei 256 8.5mm cams

    Tomei 8.5mm Valve springs

    New guides & Retainers

    Ported intake and Exhaust

    HKS CAM Gears

    Cam covers have been powder coated gold

    Greddy Oil Cap

    Kakimoto Regu 06&R Exhaust & 100 cell high flow cat

    Apexi AVC-R -

    Oiler cooler Kit

    ISC Radiator

    Q45 AFM & Z32 AFM

    + Lots more... Make me an offer for the lot

  4. hey guys

    im after a rb30/25 complete and running

    show me what u got

    call me on 0405 950 924 after 6pm weekdays

    Dane

    Ive got a freshly rebuilt RB25 Head if you can find a bottom end.

    Tomei Cams, springs, ported etc...

  5. I am chasing Apexi power fc and hand controller for ecr33 skyline in new or second hand condition.

    will pay up to $1300 delivered to brisbane for one.

    Or if anyone knows if there is a difference between power fc made by APEXi USA to APEXi JAPN let me know.

    Cheers guys thanks for any help

    I've got one here that you can have. Im also in Brisbane...

    PM Sent.

  6. Because you have not listed it i take it the bottom end is not for sale ?

    Bottom end is the only unknow at this stage. During the dyno run we started to get a very slight bottom end knock at about 4000rpm...engine was shut down immediatly and hasnt been started since...

    Bottom end has a brand new set of ARGO rods and CP forged pistons...Won't know what condition these are in until i get them out....If they are fine they'll be up for sale also...

  7. auto or manual, thats if ur selling your box

    Its a Manual...

    I want to get rid of it all so gearbox is up for grabs... If it makes a difference im pretty sure its a series 2 box as when i installed a short shifter the bush i needed for the end of the shifter was a series 2 part...

    Its bolted up to a Jim Berry clutch (specd to 350rwkw) which is also new except for the time spent on the dyno...

    PM me an offer...

  8. Its been a hard decision to make but I cant afford to spend any more money on my car and need to part it out.

    Apart from the Turbo kit everything listed here is practically brand new. I had only just finished installing this stuff on my car and was in the process of getting it dyno tuned when we ran into problems.

    It was either pull the engine again or walk away....

    With the tune only ¾ complete this combination of parts made just over 300rwkw...

    All parts have come off an Nissan Skyline R33 GTST (Series 1) and are located in brisbane & everything listed is still currently installed in the car.

    300+ rwkw Turbo / Intercooler / Intake Kit - $5000

    ok this will suit someone who has a fairly standard car and is looking for big power.

    I made just over 300rwkw with this setup and want to try and sell it as a complete set. This kit is made up of a combination of new and 2nd hand parts.

    If I don't get much interest I'll consider separating the parts at a later date.

    • HKS 3037 56t .86 Turbo
    • HKS Standard 50mm External Wastegate
    • Custom Exhaust Manifold – Ceramic heat coated
    • 3.5' split dump pipe.
    • Q45 Throttle Body
    • [NEW]600x300x76 Hybrid Intercooler
    • [NEW]Trust Type R BOV
    • [NEW]Genuine Greddy Intake Plenum – Powder coated Black.
    • [NEW]Custom throttle cable to suit relocated throttle body
    • [NEW]Custom intecooler / intake piping to suit
    • [NEW]All Hoses / Clamps / Silicone Joins to suit

    RB25 Head - $1400

    This was only recently reconditioned and reassembled by Colin Lloyd Headsense. Again I want to try and sell this as a complete setup but may consider separating at a later date.

    All components are basically brand new and have only been used for a total of 6 hours on the dyno since rebuild.

    • Tomei 256 8.5mm cams
    • Tomei 8.5mm Valve springs
    • New guides & Retainers
    • Ported intake and Exhaust
    • HKS CAM Gears
    • Cam covers have been powder coated gold
    • Greddy Oil Cap

    Power FC & Hand Controler - $1300

    practically brand new – only just installed and used for a total of 6 hours dyno time.

    Kakimoto Regu 06&R Exhaust & 100 cell high flow cat - $1000

    practically brand new – only just installed and used for a total of 6 hours dyno time.

    Apexi AVC-R - $400

    practically brand new – only just installed and used for a total of 6 hours dyno time.

    Oil cooler Kit - $250

    practically brand new – only just installed and used for a total of 6 hours dyno time.

    ISC Radiator - $250

    practically brand new – only just installed and used for a total of 6 hours dyno time.

    Set of 6 Nismo 740cc injectors - $700

    practically brand new – only just installed and used for a total of 6 hours dyno time.

    Q45 AFM - $200

    2nd hand but in excellent condition

    Z32 AFM - $250

    Comes with Tomei plugs - practically brand new – only just installed and used for a total of 6 hours dyno time.

    More items still to come.

    If anyone wants to make an offer on the whole car complete send me a PM.

    Photos to come...

    n599463778_167499_287.jpg

×
×
  • Create New...