B33st

OK guys this has been sitting around for some time now and it’s got to go. Looking to sell the car complete - $2500 or nearest offer. Will be a good base for a project or parts for another car. You’re looking at a complete s1 R33 minus the following parts which have been sold. NO Turbo NO Injectors NO Head NO Radiator NO PowerFC

Ok guys i still have a lot of this stuff and it needs to go. Willing to consider any reasonable offer. RB25 Head Tomei 256 8.5mm cams Tomei 8.5mm Valve springs New guides & Retainers Ported intake and Exhaust HKS CAM Gears Cam covers have been powder coated gold Greddy Oil Cap HKS 3037 Turbo Kit HKS 3037 56t .86 Turbo HKS Standard 50mm External Wastegate Custom Exhaust Manifold – Ceramic heat coated 3.5' split dump pipe. Kakimoto Regu 06&R Exhaust & 100 cell high flow cat Oil cooler Kit The rest of the car is pactically complete so if someone is looking for a good base for a project i am open to offers on the whole lot... S1 R33 and plenty of good condition performance parts

Hey ive got 2 bonnets (one standard and one carbon with vents etc. Also have a hybrid 600x300 cooler as well. bout 20 minutes south of brisbane... PM if you interested.

Heya mate I got a lot of these bits available but in brisbane. Oil cooler Afm and plug Oil catch can Complete fuel setup. fuel lines, surge tank, pumps, reg. HKS 3037 turbo kit. Ive also got the poncams but for a series one head. Ive got the rebuilt head and all for sale though if interested. interested?

ok guys its been a while and I havent put much efforf into selling this stuff but I really want it gone now. I basically have a complete car minus the plenum, injectors and the power fc. Will be open to any offers on any parts or willing to do a good deal if someone wants to take the lot.

R33 GTS-t... Pretty good condition, almost complete but has spun bearing. Would come with lots of practically brand new performance parts good for over 300rwkw.. HKS 3037 56t .86 Turbo HKS Standard 50mm Wastegate Custom Exhaust Manifold – Ceramic heat coated 3.5' split dump pipe. 600x300x76 Hybrid Intercooler Custom intecooler / intake piping to suit All Hoses / Clamps / Silicone Joins to suit Rebuilt RB25 Head This was only recently reconditioned and reassembled by Colin Lloyd Headsense. Has only been used for a total of 6 hours on the dyno since rebuild. Tomei 256 8.5mm cams Tomei 8.5mm Valve springs New guides & Retainers Ported intake and Exhaust HKS CAM Gears Cam covers have been powder coated gold Greddy Oil Cap Kakimoto Regu 06&R Exhaust & 100 cell high flow cat Apexi AVC-R - Oiler cooler Kit ISC Radiator Q45 AFM & Z32 AFM + Lots more... Make me an offer for the lot

Ive got a HKS 3037 setup for sale if your interested.

Ive got a freshly rebuilt RB25 Head if you can find a bottom end. Tomei Cams, springs, ported etc...

PowerFC Sold....

I've got a Power Fc for you... PM sent... Leigh.

I've got one here that you can have. Im also in Brisbane... PM Sent.

I've got one that is practically brand new. Been used for 6 hours dyno time only... PFC + HC $1250 (inc postage anywhere in AU)

pm sent.

Greddy Plenum & Injectors are SOLD.... Everything else is still available... Make me some offers guys...

Just a quick update. Most parts are now off the car and ready to go. Send me a PM with any of your offers.. Leigh.

Just been down and taken a few photos of the parts on the car. I've got a couple of days off now so tomorrow is the first chance i'll get to start removing parts. If anyone see's anything in the photos they want that isnt listed just send me a PM with your offer... http://picasaweb.google.com/leigh.munro/Skyline

Bottom end is the only unknow at this stage. During the dyno run we started to get a very slight bottom end knock at about 4000rpm...engine was shut down immediatly and hasnt been started since... Bottom end has a brand new set of ARGO rods and CP forged pistons...Won't know what condition these are in until i get them out....If they are fine they'll be up for sale also...

Its a Manual... I want to get rid of it all so gearbox is up for grabs... If it makes a difference im pretty sure its a series 2 box as when i installed a short shifter the bush i needed for the end of the shifter was a series 2 part... Its bolted up to a Jim Berry clutch (specd to 350rwkw) which is also new except for the time spent on the dyno... PM me an offer...

No Problems... Photos of everything to come in the next few days...

...

Its been a hard decision to make but I cant afford to spend any more money on my car and need to part it out. Apart from the Turbo kit everything listed here is practically brand new. I had only just finished installing this stuff on my car and was in the process of getting it dyno tuned when we ran into problems. It was either pull the engine again or walk away.... With the tune only ¾ complete this combination of parts made just over 300rwkw... All parts have come off an Nissan Skyline R33 GTST (Series 1) and are located in brisbane & everything listed is still currently installed in the car. 300+ rwkw Turbo / Intercooler / Intake Kit - $5000 ok this will suit someone who has a fairly standard car and is looking for big power. I made just over 300rwkw with this setup and want to try and sell it as a complete set. This kit is made up of a combination of new and 2nd hand parts. If I don't get much interest I'll consider separating the parts at a later date. HKS 3037 56t .86 Turbo HKS Standard 50mm External Wastegate Custom Exhaust Manifold – Ceramic heat coated 3.5' split dump pipe. Q45 Throttle Body [NEW]600x300x76 Hybrid Intercooler [NEW]Trust Type R BOV [NEW]Genuine Greddy Intake Plenum – Powder coated Black. [NEW]Custom throttle cable to suit relocated throttle body [NEW]Custom intecooler / intake piping to suit [NEW]All Hoses / Clamps / Silicone Joins to suit RB25 Head - $1400 This was only recently reconditioned and reassembled by Colin Lloyd Headsense. Again I want to try and sell this as a complete setup but may consider separating at a later date. All components are basically brand new and have only been used for a total of 6 hours on the dyno since rebuild. Tomei 256 8.5mm cams Tomei 8.5mm Valve springs New guides & Retainers Ported intake and Exhaust HKS CAM Gears Cam covers have been powder coated gold Greddy Oil Cap Power FC & Hand Controler - $1300 practically brand new – only just installed and used for a total of 6 hours dyno time. Kakimoto Regu 06&R Exhaust & 100 cell high flow cat - $1000 practically brand new – only just installed and used for a total of 6 hours dyno time. Apexi AVC-R - $400 practically brand new – only just installed and used for a total of 6 hours dyno time. Oil cooler Kit - $250 practically brand new – only just installed and used for a total of 6 hours dyno time. ISC Radiator - $250 practically brand new – only just installed and used for a total of 6 hours dyno time. Set of 6 Nismo 740cc injectors - $700 practically brand new – only just installed and used for a total of 6 hours dyno time. Q45 AFM - $200 2nd hand but in excellent condition Z32 AFM - $250 Comes with Tomei plugs - practically brand new – only just installed and used for a total of 6 hours dyno time. More items still to come. If anyone wants to make an offer on the whole car complete send me a PM. Photos to come...

I've got a complete Head if your interested? Recently rebuilt (only done a few dyno runs) Tomei 256 8.5 cams Tomei 8.5mm Valve springs New guides & Retainers Ported intake and Exhaust HKS CAM Gears Also in Brisbane.....

I've been thinking about selling the carbon one i have on my car. Paid over a grand for it a few years ago and the skyline has been garaged most of that time... Make me an offer if this is the kind of thing you are looking for... http://www.300zx.com.au/pricelists/General...t33series1b.jpg Leigh.

Heya mate, I'm trying to track down a gasket set myself now... Did you end up finding yours locally?

Got any photos showing the condition the rims are in?