ClassOne
-
Posts
104 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by ClassOne
-
-
The stupid things have 3 or 4 micro switches... Can bet one of them is the issue.
-
I'll see if I can dig up the pics.
I'll try explain the main things.
1st remove the inner tail gate. (Carpeted lower section)
And the plastic outer, your gonna need a flat blade to lever it.. I thought I was going to break it.
It's stubborn!
Peal back the plastic so you can look inside.
Take the (4 or 6) bolts out of the boot latch/mech
It's all one piece.
Un clip the wiring, and I think I moved the control box which is on the left hand side (viewed looking at the latch)
The motor/mech assembly is a bitch to remove..
It's so tight!
I dropped in down into the cavity and moved it to the right of its mount bracket.
It pretty much has to do a complete 360 to remove it and you remove it from the left of where it was bolted in..
So it drops down moves to the right, goes around the mount bracket while starting the 360' turn and exits a hole to the left of its original mount position.
The pain is the latch! It's size!
Once it's out and moved to the right, push the thinner section (with the motor) up as far as you can get it into the tight cavity (towards the glass).
Then rotate it clockwise while trying to get the fat latch past it's mounting points..
I can't stress how tight this is, you don't need physical force, it's like there is only 1 way it works, period!
After you get the latch past the mount bracket,
Keep rotating until you get the latch pointing towards the glass,
If you look now into the boot from the left side of the latch mount, you can see another cavity,
Push the fat latch up into it,
You then should be able to rotate it clockwise while pulling it down and to the left to complete its 360' rotation and end up with the latch facing you.
You will need your flat blade again to slightly bend the plastic to get the latch thru the cutout and out it comes,
Do the opposite to get it back in.
That gives you an idea.
I'll try and find the pics I took.
Don't have the stagea anymore, took on 2 kangaroos... Write off!
-
Take it to jet wreck ...I'm sure he will reply soon.
I don't know if hills Motorsport have changed owners.. But a good 6 years ago they were rubbish.
Don't know what you were quoted or what your box needs.. But a service at JAX, flush and new oil with me providing the oil was $130
-
M35 turbos always fail... Has nothing to do with the engine.
-
Why not ey?
-
Hey blokes,
Noticed one bank is leaking oil from the rocker cover gasket.. Passenger side.
I did a search but showed no results.
Has anyone got the part number for them?
Ps - anyone know if there is any of those plenum spacer kits going around?
Cheers
-
Technically it has not failed, the component is still in tact and has not lost any partial component of its primary construction or warn out to the point that it has failed.
Yes it is warn but it technically has not failed.
Just like a wheel bearing, just because its making a racket does not mean it has failed, it is just at the upper limit of its life span.
A failure would be indicated by a permenant non repairable failure of an integral component.
They are right by saying it is ware and Tare,
But Nissan identified this as a component failure as such.
You could also argue the term failure.
Does that mean complete failure to function OR partial failure to function
Which the latter is true. And you have a supported claim by the manufacturer.
Your dealing with an insurance company, they don't want to pay you.
So you need to be smart with terminology and build yourself a solid case.
I would use the term "failure" as your primary argument, because if it doesn't say complete failure, then it can also partially fail so technically it has failed.
-
Mine was diff pump
-
-
What was the damage to get it done Scotty?
-
Can anyone give me some tips on servicing this box?
I've never done an auto box before, I just want to make sure I get all the old oil out.
Has anyone done a DIY on this before with success ?
Any help would be appreciated
-
Usually 3 bolts and a C clip, fiddly biatch
-
-
what oil viscosity do you guys run?
i thought the recommendation was a 5w40?
or was that 10w40?
-
Shouldn't sound like that.
You could assume its had a hard life? Blow smoke on start at all? Or after coasting then on the gas again?
If its tapping away it could have lifter issues.
Did you check the oil quality and quantity?
And last service interval?
-
-
been done... dont know what model commo wagon, but it was an SS..
guess its how you drive, just locked it in syncro and mashed it on green.
(yes he mashed it to... it wasn't a single mum with a baby)
-
It's 204kw at the fly factory, attessa system is full time RWD with torque split as necessary.
RWD only loose 15 - 20% through the drive train, so that's a max loss of 40kw, which makes around 160rwkw
And in 70/30 split its about 30% loss which is 140kw at all 4.
You have to remember this.
Your sigma, silvia, corolla, datsun, etc are all around 1.0 - 1.2 T.. With the same if not
More power at the treads...The M35 is 1.6 - 1.7 T
That's an extra 0.5 T of weight is has to move.
You can't compare cars like that.
In the end it's a family wagon... It will beat an SS commo wagon...
BUT - the M35 has alot of unlocked potential.
-
Slow?
1st time I drove one I was impressed.
You sit pretty high in a stagea.. This would make it seem slower then it is.
That's odd.
Seriously slower then your sigma?
If that's the case, walk away. Look at another car.
-
it should make no difference if the valve is setup properly.. the spring tension must be set for the particular setup.
google setting up bov tips..
if you need some electronic management to run a bov it would be a flawed design.
IMO they are not a performance upgrade, they just make a girly sound and they are a defect worth defecting.
external gate + remove BOV.
-
1
-
-
Drift Fest Zero2
When - June 1st and 2nd 2013
Location - Raleigh international raceway - Coffs Harbour NSW
Track time - 8hrs/day
Meals provided for paying entrants - 3 meals saturday, 2 sunday
Accommodation - camping on site included for paying entrants
Friday night camping available at addition cost
Before Entering please read all of the following information:
To enter please visit the link below:
http://www.ae86drivingclub.com.au/forums/event.php?Event=3
16hrs of no stop driftThis event will include 3 meals saturday and 2 sunday in the cost!... and more then just snags this time boys
Limited spots available again.Event now open!!Proudly sponsored by:To be held on the Coffs coast @ Raleigh international raceway, 15 mins south of coffs harbour, a midway point from sydney to Brisbaneapprox 6 hrs from sydney.EVENT INFOCircuit DetailsRaleigh International Raceway, Valery Road, Raleigh NSW Clockwise Bitumen Surface 1050 MetresLocation : Raleigh international racewayDate - February 23rd - 24thDuration: Sat + Sun , 9am - 5pm each day!Cost - $250 per Driver for the entire weekend. (if you have 2 drivers and your sharing a car, you pay $250 each and so on.)Passenger rides - $70/weekendSpectator pass - $50/weekendWhat does that include?track time from 9am - 5pm saturday and sundayCamping on site!3 meals saturday and 2 meals sunday.TimetableGates - 7amScrutineering – from 7amDriver brief – 08:30 Compulsory!!Driving starts at 9amFinishes at 5pm.Entry FormsMust be submitted before the event.PaymentsFull name to be left with the deposit.Indemnity FormsAll drivers and passengers and pit crew must sign the Raleigh Raceway Indemnity Form before entering track area each day. A Briefing for All drivers, passengers and crew will commence at 8.30 am on the Grid area.it is mandatory you attend.Accommodation:Camping is included in the cost for Saturday and Sunday Night and is subject to the conditions listed just above ^Want to get there early, set up chill out and talk rubbish?Friday night camping is available at an extra $15 per person (includes dinner if your there by 8pm)FoodSupplied for all registered and payed drivers, passengers and spectatorswrist bands will be supplied.Tyre ChangerA tyre Changer will be on site and an opperator supplied, Tyre changes will be $10 per tyre.You must take all used tyres with your from the venue.Driver Requirements:min 18yrs old.Certified helmetlong pants/shirt and enclosed shoesYOUR CAR WILL GO THROUGH SCRUTINEERINGPlease guys get your crap together:All wheel nuts presentseats secured with all 4 boltsseatbelts or harness's present and in working orderNo oil/Fuel leaksBatteries secure, cable ties don't count!Noise restrictions94.5 Dba @ 10m @ 6000rpmAny car with not muffling.. EG, straight thru exhaust systems, turbo or not will NOT pass.I NEED TO STRESS, YOU WILL NOT BE ALLOWED ON THE TRACK IF YOU FAIL THE NOISE TEST!!,if in doubt buy a silencer off ebay for your system.if you car doesn't have a working tacho, the desired RPM will be chosen by the Testing official by ear.if your car is considered to loud or "offensive" you will not be allowed on the track.SCREAMER PIPES ARE NOT ALLOWED!General housekeeping Rules.Everything you bring you take away with you, this includes used tyres!!No drifting,hooning burnouts on the entry road or in the roads around the facility!!! this is very very strict... Do it and you WILL be sent walking and you will NOT get a refund!!!CArs are not to be driven around the grounds during the night, ( extenuating circumstances apply )If you want more cheap events like this BEHAVE!Every driver/ passenger will be required to attend a compulsory driver brief at 8:30am ( times may change )Passengers-All passengers must complete the disclaimer before taking part in the activity.-There is no Personal Accident Insurance available for passengers.-There must be a pre-determined signal for each passenger to call of the run-No passengers in Tandem Drift Competition-The manner in which the activity is going to be conducted must be clearly explained-All passengers must have an opportunity to ask questions.-Passenger to be 16 years or overPassengers must:1. Not hassling drivers for a ride - because it will be there choice in the end if they take you or not.2. expect officials to organise you a ride. this will not happen!3. supply your own approved helmet, or no ride, no questions.4. wear the appropriate clothing and shoes.ScrutinyScrutineering Session from 7.00 am All cars must be scrutineered and passed prior to participating in practice or competition. Scrutineering Form to be filled out by drivers. Competition Ready, all loose items are to be removed from the car, helmets in carAlcohol During any eventconsumption of alcoholic beverages in the paddock, pits or any other portion of the competition venue under the control of the officials is expressly forbidden.Vehicle Breakdown- Vehicles should have a tow point fitted to minimize damage to their car- No persons shall be allowed on the track to assist with their car unless-Approved to do so by a Raleigh Raceway official- Do not attempt to repair the car; your car will be recovered as soon as possible- Leave the vehicle and move behind a tyre barrier only when it is safe to do soSafety Requirements- - - - - - - - -*Towpoints/Hooks and Fire Extinguishers required ( the use of raleigh raceways fire extinguisher will incur a $70 fee.*HELMETS that comply with AS1698 and carries markings to that effect*Non-flammable clothing, includes cover from ankles to wrist to throat*[Nylon or similar material is unacceptable*Suitable covered footwear*Safety Harnesses or Seat Belts must be complete units*NOISE LEVEL allowed 94 dba at 10 metres*Passenger restraints [if none - window up]*NOTE: Tandem Drift require if there are 4 cars on the track, the last two cars are to maintain a distance of 200 meters from the first twoFlagsBlack Flag - Rules of the event are not being obeyed/mechanical defaultLeave the Track and Report too official.Yellow Flag - “CAUTION” all course yellow - indicates problem on trackChequered Flag - Indicates session finished - Return to Paddock area via Pit Lane, slowlyRALEIGH RACEWAY ASK ALL DRIVERS/PIT CREW/PASSENGERS AND SPECTATORS TO LEAVE THE RACEWAY IN A RESPONSIBLE MANNER POLICE ARE ADVISED OF THE DRIFT EVENTS AND SPONTANEOUSLY ARRIVE AT THE TRACKTHIS ACTION WILL ENSURE THE FUTURE OF DRIFT EVENTS THANK YOU-
1
-
-
Bov needs adjustment
-
Good to know, did you run the part number thru Jesse streeter by any chance?
-
I really like the snow channel while I drive 2
Wtb Skyline/silvia Rolling Shell
in Wanted to Buy
Posted
Hey mate - ive got an S13 rolling shell.
located in sydney
got everything bar drivers seat and drive line.
Pm if interested.