-
Posts
194 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by cree
-
-
So my bout is not locking I know how to fix it but the part I need is very hard to find. Any ideas how to make it stay closed temporally until I find the part I need.
-
I need a boot lock. It the part that bolts to the actual car not the boot lid. Call or SMS me if you have one 0414603362
-
Injectors and Z32 gone. Just the Custom plenum.
-
Bit of glue or double sided tape. Or try find a new grill.
-
Not sure with skyline headlights but you can put them in your oven on a lowish temp to make the glue go soft
-
Hey,
do all GTT's come with the triple gauge cluster?
cause i just bought mine and it doesn't. i really want to put it in tho.
so your saying the plug for the cluster should be under my dash? and i just need to cut the relevant hole and install the triple gauge harness?
Cheers,
Alex
Pretty sure they are from a GTR. There won't be any plugs behind the dash for it.
-
What does the headlight controller do? Never heard of them before and does it do for the headlights?
-
Selling a couple more parts that I have laying around.
Boot Lid. It in great condition, straight not dents.
Condition: Very good
Price: $100.00 ono
Location: Campbelltown
Postage and Delivery: Can meet up but prefer to be picked up
Contact: 0414603362 (quicker response) or PM
Pics
Ignition system and door locks.
Condition: Very good
Price: $100.00 ono
Location: Campbelltown
Postage and Delivery: Can meet up
Contact: 0414603362 (quicker response) or PM
Pics
-
$500 for everything. Need this gone by the end of the month.
-
Also have a custom made forward facing inlet plenum with 80mm throttle body. It came off my mates RB25 and I was going to put it on my RB20 but am no longer going to like the other parts.
Condition: Good
Price: $250.00
Location: Campbelltown
Contact: 0414603362 (quicker response) or PM
Pics
-
Wow that is amazingly clean especially for a black car. Wish mine would come that shiny. Time for a re-spray I think.
-
I would get 17x9 for the front and 17x10 for the rear.
-
Maybe something is blocking it from going back up. Check the window with the door trim off and make sure it's still on the runner and isn't blocked by something.
-
I think there was a thread about cleaning the switch contacts. I think you just need to pop out the switch but be careful as the parts could go flying everywhere.
-
What you prob had happen is that there appears to be 2 earth wires but 1 is actually for an illumination signal to dim the head unit. Soon as lights are turned on it pops the fuse.
I ended up earthing to somewhere else instead. But yes as soon as I turned the lights on it popped the fuse.
-
-
What settings do you have it on, high or low ?
I disconnect my battery all the time and I have never had a issue, I ve disconnected the control twice as well moving it position on the dash and whilst installing a remote high/low boost switch.
It's on high. I never change it. It only going over by 1psi but still shouldn't be doing that.
-
So I disconnected it and now when I hit full boost it is going higher than before. Haven't changed any settings. Any thoughts to why!
-
I had this problem after installing a new head unit. Turned out the earth on the standard looms doesn't earth. You haven't added anything to car recently?
-
I want to re-locate my Profec boost controller but not sure if it will reset itself if i take all the plugs out. I assume it won't but just want to make sure.
-
Price drop. $300 for injectors and $200 for the Z32!
Part Number: 18U-02-0440-6
-
Shouldn't there be some sort of marking on the inside of the rim to identify the brand?
-
make offers want these gone fast.
-
Yeh you shouldn't have to disclose everything to them. But make a call and get what is best for yourself.
Wiring Harness For Triple Gauge Cluster
in Cosmetic, Styling & Respray
Posted
Yeh pretty sure, not 100% on what wiring looms you will need to make it work though.