Jump to content
SAU Community

Complete Front Mount Intercooler Kits In Stock To Suit All Major Jap Cars! Only $449!

GKTECH

By GKTECH,
in For Sale (Business Traders)

 Share

Recommended Posts

GKTECH Mentor

GKTECH

Posted
Posted

Complete Front mount intercooler kits to suit all Major jap cars

ONLY $449 - LIMITED STOCKS

The front mount bar and plate intercooler kits are constructed entirely of high quality 6061 aluminum and the intercooler core is 100% vacuum brazed. The polished aluminum end tanks are hand TIG welded for a perfect fit. The ambient fin pitch has been adjusted to provide an optimal fin density of 15 fins/inch. This gives the intercooler excellent flow properties as well as a large cooling surface area, and the efficient Bar & Plate core takes advantage of these properties. The piping is all mandrel bent and contains only 1 weld mark throughout the whole kit. The kit includes 1x 600x 300x 76mm intercooler, polished aluminimum piping, all brackets, nuts, bolts, tripple layer silicon hoses, clamps etc.

The kits are designed to be installed DIY and are very easy to install. For installation help please email us or give us a call.

Features & Specs:

-All TIG Welded 6061 Aluminum, polished end tanks

-100% Vacuum Brazed Core

-High Efficiency Bar & Plate Construction

-3 popular Sizes available

-Inlet/Outlet: 3inch

-Low pressure drop w/ only 0.2psi at 15psi of boost

-Tested CFM: 1020 CFM

-Fin Pitch: 15 Fins/Inch

-Four Threaded Universal Mounting Points

e1.jpg d1.jpg c1.jpg b1.jpg a1.jpg

cooler1.jpg cooler5.jpg cooler6.jpg cooler7.jpg cooler2.jpg

FREIGHT: (all items are sent out by registered post with full insurance)

VIC: $30

SA/NSW: $45

QLD: $50

WA/NT: $70

IN STOCK NOW READY TO BE SENT OUT OR PICKED UP!!!

To order please send me a PM or send an email to [email protected]

  • 2 weeks later...
GKTECH Mentor

GKTECH

Posted
  • Author
Posted
mine hasnt arrived yet :P

Please send me a PM with your order details.

To get from here to Austrlia wide can take up to 6 working days.

cheers,

Greg

GKTECH Mentor

GKTECH

Posted
  • Author
Posted
hey mate,

do you have a pic showing in the inlet/outlet? cheers,

also do you only sell bar and plate, or also tube and fin?

-JD

Hi, you can see more pictures of the intercoolers on our website here: http://www.gktech.com.au/products/?id=57

We only have the bar and plates at this stage.

cheers,

Greg :P

GKTECH Mentor

GKTECH

Posted
  • Author
Posted
I'll just wait. I know you went too china. Not trying to cause any trouble.

I am still in China but things are running as per usual and all orders have been sent out within 24 hours of receiving payment, I don't know which day your kit was sent out because I don't know who you are.. If you could send me your information I can check it for you on our order system.

cheers,

Greg

  • 2 weeks later...
  • 2 weeks later...
 Share
Go to topic listing


  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...