Jump to content
SAU Community

Recommended Posts

now for the sale, i have the following on offer.

1) 2 x s15 rear bars ADM in very good nick (black and blue)... $80 each ono

2) S15 rear rear cradle wercking...

-camber arms $150 pair

-lower control arms $180 pair

-other "arms"... make me offers

-or the whole cradle minus diff, driveshafts and hubs $500

3) s15 door tirms in perfect condition... $250 each or $450 pair nego

4) s15 passengers side door shell in blue... $250 in very very good condition

5) s15 mirrors in blue... $100 the pair in excellent condition

6) s15 drivers airbag.. $200.. passengers.. $200... control module $250... or all together $550

7) s15 engine mounts... $50 each or $90 the pair

7.5) s15 clutch standard item with plenty of meat left (flywheel included) $200

8) cefiro seats front and back... very rare colour kinda greyish brownish.. cef owners should know what im talkin about... in excellent condition... $250

9) cefiro crossmember will bolt any rb engine into a silvia complete with engine mounts... $250

10) cefiro stock front and rear bars in good condition in silver... $100 each

11) rb20e engine in very good condition... free (pickup)

12) rb20 gearbox either de or det not sure in very good condition with flywheel and clutch $400

13) Rb20 tailshaft yoke only... $50

13.5) cefiro steering rack non hicas... $200

13.6) cefiro tierods $100 pair

14) s14 crossmember... $200

15) s14 steering rack.. $200

16) s14 tierods... $100 pair

17) S13 side skirts $50

18) SR20det inlet manifold complete with injectores and throttle body $100

19) SR20de complete engine great condition low km's $200

20) s13 standard rear camber arms $40 pair

21) s13 standard rear toe arms $40 pair

22) s15 air con compressor like new $100

23) CA standard intercooler $40

24) s13 standard rear bar two tone silver $80

Aftermarket parts

1) work meisters 18x9.5 (+38) 18x11 (+41) with "drift spec" rear tyres and semi decent front ones in gold.. (has some gutter rash)... $2300 ono

2) HKS camp system.. display vehicle revs.. speed... etc anything from the ecu on your tv screen (not included).. comes with HKS remote.. ... $300

3) greddy emanage with main harness... $350

4) s13 ganador mirrors one side come apart... suit diy fibreglasser... $130

5) tomei exhaust temp gauge black face... $60

6) greddy oil/water temp gauge... electronic.. needs sender... black face... $100

7) s13 apexi mild steel 3" catback exhaust including resonator but not the muffler... $150

theres prolly somemore stuff i forgot to mention but ill post them up as soon as i find any new stuff.

ALL PRICES ARE NEGOTIABLE!!!!!!!!!!!!!!

do not hesitate to contact me via pm or on 0416734388

kinda regards

Link to comment
https://www.sau.com.au/forums/topic/127133-various-nissan-parts-a31s13s14s15/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...