Jump to content
SAU Community

Recommended Posts

Hi All,

Have the following items for sale left over from previous vehicles. I would prefer pick up, however we can talk about postage.

Momo steering wheel, all black 300mm. Nice and small, sits nicely in your hand and looks awesome! Has Momo horn button, no boss. As I have the Momo horn button already it means you can buy a cheaper Autotechnica boss kit and use the Momo horn button I supply, rather than having to spend twice the amount on the Momo boss kit, just to get the Momo button. Near new condition, has only had about a months use. Both my cars are airbag equipped so no longer need this. $250 ono

Kenwood 220w 6x9's. Model number KFC6908. VGC work perfectly and sound great, also come with those black plastic spacer boxes so you don't have to cut holes. Grilles have a bit of blu tack on them, but this will wash off! $100 ono

Kicker Impulse IX404 4 Channel Amp. $250 ono. Works perfectly and in great condition except some scratches on the front. Only selling due to upgrade. Key Features:

Amplifier Type Multi Channels

Bridgable Bridgable

RMS Power at 4 Ohms 40 W x 4

RMS Power at 2 Ohms 60 W x 4

Performance

Frequency Response 20 Hz - 20000 Hz

Signal to Noise Ratio 95 dB

THD at Rated RMS Power .09 %

Crossover / Equalizer

Bass Boost With Bass Boost

Bass Boost Frequency 40 Hz

Low - Pass Frequency 70 Hz - 110 Hz

High - Pass Frequency 70 Hz - 110 Hz

Other Features

Input Voltage 12.5 volt

MOSFET Circuitry Yes

3 Way Ready Yes

Dimensions

Width 9.5 in.

Depth 11.4 in.

Height 2.5 in.

Miscellaneous

More Information

It offers two circuits each for bass and treble adjustments to get your front and rear speakers sounding the way you want. Two active crossovers let you direct frequencies for maximum effect. Select from 2-, 3-, 4-channel, or Tri-Way output, depending on your wiring needs. Buffered RCA outputs let you link multiple amps without using splitters.

And last of all, a muffler! No, not a performance design, just a standard run of the mill muffler. It is brand new, well sort of. I got defected for car being too loud so had this put on to pass EPA test. Drove home and removed it. Barrell shaped and would suit the rear of the vehicle. 2 inch tip. I can get pics if required. I am after $80 ono for this.

Pics below!

Sorry about all the crappy pics, best I can do unfortunately. Happy for you to inspect though.

Any questions just let me know on here, or call 0418 597 239.

post-26224-1158404827.jpgpost-26224-1158404843.jpgpost-26224-1158404862.jpgpost-26224-1158404882.jpg

Edited by private9

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
    • Genuine is best. I have to replace my SIL's Audi A3 DRL module because the $20 alibaba special one has faded within a month... Sigh...
×
×
  • Create New...