Jump to content
SAU Community

Wednesday Afternoon Prac

option1

By option1,
in Events

 Share

Recommended Posts

option1 Rising Star

option1

Posted
Posted

Having another practice this Wednesday, same details as always.

$40 per car

Start: 4pm

Finish: DARK

We ask that competitors arrive around 3:30 so we can get everyone organised and on track asap. Tuition is available, all you have to do is ask.

No spectators for these events.

Thanks,

Harps

Link to comment
https://www.sau.com.au/forums/topic/185355-wednesday-afternoon-prac/
Share on other sites
trust_33 Enthusiast

trust_33

Posted
Posted

hey guys im from bundy and iv been keen to attend one of these practice days ever since i saw them avertised a few months back, is it recommed to bring spare sets of tyres etc?? what else is needed to attend?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Was that with the cas upside or correct way up?
    • nash47
      Cas issue

      By nash47 · Posted

      Did and sync timing with light 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...