Jump to content
SAU Community

Recommended Posts

Hi, i was wondering if anyone can tell me where to stick the vacuum tube for the boost pressure that comes off the back of the Blitz DTT DCIV control unit. The timer is on a series I(.5) R33 gts25t. Any comments (other than "up ur bum") would be a great help.

Cheers

-- Foo

Link to comment
https://www.sau.com.au/forums/topic/215211-vacuum-tap-for-blitz-dtt-dciv/
Share on other sites

Up your bum :P

Google tells me you have a turbo timer with a map sensor to measure boost... just like a lecky boost gauge.

So just like a boost gauge, if you want it to measure vacuum and boost, you need to plumb it in somewhere between the throttle body and head. Look around, there'll be somewhere you can "T" it in.

FYI: its best practice not to T it in to something thats "mission critical" sensitive to boost, like the FPR.

No response... :thumbsup:

This post has a picture that ell help you if your still stuck. The blue boost line goes to the sensor for the stock dash vac/boost gauge.

Thanks for the replies GeeTR. This helped heaps 'cause i now have my dual turbo timer actually doing 2 things. Boost pressure is coming through nicely. Thanks.

Now, if only i'd mounted the control face so that it wasn't blocked by the steering wheel...

Cheers

-- Foo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...