Jump to content
SAU Community

Nismo Injectos, Gtr Baffle, Resistor Pack, Gtr Rear Wing, Gtr Pistons And Rods, A31 Crossmember

J'z-R33
 Share

Recommended Posts

J'z-R33 Grand Master

J'z-R33

Posted
Posted

Hey all,

Got the below items for sale as they are no use to me anymore..

Item: Nismo 600cc top fed injectors

Age: not sure, injectors were flow tested and cleaned before purchase

Condition: good, flow tested and cleaned before purchase

Price: $550.00 delivered

To Fit: (What car) top fed RB26

Location: Sydney

Contact: PM me

Comments: Will up some pics up tomorrow. they are the purple ones

The 600cc injectors wont cut it for my application so they have to go..

Item: RWD RB26 sump, has diff cut off and drive shaft welded up also have a #8 oil return feed. (tomie baffle not included)

Age: New (was only dummy fitted)

Condition: as above

Price: $550.00

To Fit: (What car) Suit RWD RB26 project

Location: Sydney

Contact: PM me

Comments: Had this sump modified by Jays Racing, its a standard alloy rb26 sump with the diff cut out and drive shaft welded up. It top quality work and took over 8 hours to create. I will post pics up soon and you will see the quality work! Its all Alloy construction and looks better then a factory sump!

Item: JUN Oil Pan Baffle Plate for RB26dett

Age: Brand new

Condition: Brand new

Price: $450.00 FIRM delivered anywhere is Oz.

To Fit: (What car) RB26dett

Location: Sydney

Contact: PM me

Comments: Helps with oil control to the oil pickup

This is the best aftermarket baffle on the market, its brand new in the box bought for $540. Part number 1028M-N001

Item: GTR resistor pack

Age: Brand new

Condition: Brand new

Price: $140.00 delivered FIRM

To Fit: (What car) anything running low imp. injectors

Location: Sydney

Contact: PM me or reply here

Comments: bought two by mistake, also have OEM RB26 injectors and rail..

Item: Genuine R33 Gtr rear wing, painted mid night purple (was on a 40th ann. shell I purchased recently)

Age: used

Condition: used

Price: $450.00 ono

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Bought a do luck rear wing so not needed.

Item: RB26 stock pistons and rods (05U)

Age: used

Condition: used out of a 80,000km engine

Price: $300.00 ?

To Fit: (What car) Rb26 or make a RB24

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, going forged

Item: A31 (Cefiro) engine cross member

Age: used

Condition: straight no rust

Price: $200.00

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, was going to do a 26/30 but decided against it. so this is no longer needed.

skitsdrift33 Apprentice

skitsdrift33

Posted
Posted
Hey all,

Got the below items for sale as they are no use to me anymore..

Item: Nismo 600cc top fed injectors

Age: not sure, injectors were flow tested and cleaned before purchase

Condition: good, flow tested and cleaned before purchase

Price: $550.00 delivered

To Fit: (What car) top fed RB26

Location: Sydney

Contact: PM me

Comments: Will up some pics up tomorrow. they are the purple ones

The 600cc injectors wont cut it for my application so they have to go..

Item: RWD RB26 sump, has diff cut off and drive shaft welded up also have a #8 oil return feed. (tomie baffle not included)

Age: New (was only dummy fitted)

Condition: as above

Price: $550.00

To Fit: (What car) Suit RWD RB26 project

Location: Sydney

Contact: PM me

Comments: Had this sump modified by Jays Racing, its a standard alloy rb26 sump with the diff cut out and drive shaft welded up. It top quality work and took over 8 hours to create. I will post pics up soon and you will see the quality work! Its all Alloy construction and looks better then a factory sump!

Item: JUN Oil Pan Baffle Plate for RB26dett

Age: Brand new

Condition: Brand new

Price: $450.00 FIRM delivered anywhere is Oz.

To Fit: (What car) RB26dett

Location: Sydney

Contact: PM me

Comments: Helps with oil control to the oil pickup

This is the best aftermarket baffle on the market, its brand new in the box bought for $540. Part number 1028M-N001

Item: GTR resistor pack

Age: Brand new

Condition: Brand new

Price: $140.00 delivered FIRM

To Fit: (What car) anything running low imp. injectors

Location: Sydney

Contact: PM me or reply here

Comments: bought two by mistake, also have OEM RB26 injectors and rail..

Item: Genuine R33 Gtr rear wing, painted mid night purple (was on a 40th ann. shell I purchased recently)

Age: used

Condition: used

Price: $450.00 ono

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Bought a do luck rear wing so not needed.

Item: RB26 stock pistons and rods (05U)

Age: used

Condition: used out of a 80,000km engine

Price: $300.00 ?

To Fit: (What car) Rb26 or make a RB24

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, going forged

Item: A31 (Cefiro) engine cross member

Age: used

Condition: straight no rust

Price: $200.00

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, was going to do a 26/30 but decided against it. so this is no longer needed.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Anyone running the VQ37VHR with forced induction?

      By GTSBoy · Posted

      Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • GTSBoy
      Starter motor replacment teeth count.

      By GTSBoy · Posted

      Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      lights are on just the one click.  
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • f00stx
      Anyone running the VQ37VHR with forced induction?

      By f00stx · Posted

      When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...