Jump to content
SAU Community

Recommended Posts

guys I just read an article in zoom according to this we are allowed 95db exhaust noise level, what I don't get though is in the article it said they have only to DECC approved defect clearance stations in nsw, the granvilled 1 and campbeltown 1 now I've had a defect cleared else where, so I'm assuming that you only have to go to these 2 if the police request you to go here or if the EPA defect you, otherwise it's ok to go to any blue slip place, am I correct to assume this or what? Can some one elaborate on this cheers

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/
Share on other sites

guys I just read an article in zoom according to this we are allowed 95db exhaust noise level, what I don't get though is in the article it said they have only to DECC approved defect clearance stations in nsw, the granvilled 1 and campbeltown 1 now I've had a defect cleared else where, so I'm assuming that you only have to go to these 2 if the police request you to go here or if the EPA defect you, otherwise it's ok to go to any blue slip place, am I correct to assume this or what? Can some one elaborate on this cheers

if they have ticked on your defect notice only one of these 2 people can clear your defect then you have to go to one of them , if i was you id go to the cambeltown guy, im talking from experience the guy at granville is the biggest d******** ,

take a picture of your defect notice post it up so we can see what your in for ??

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4124568
Share on other sites

http://www.skylinesaustralia.com/forums/En...amp;hl=mrgtr911

I Found my old link from when i had my r32 gtr, i too at the time had big preoblems , that was a big pain to pass but after it was over i knew all the tricks in the book so if you need help shoot me a pm ...

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4126888
Share on other sites

cool thanks mate, you reckon they will engineer a fmic if i have already had a emissions test done?

my car passed emissions with FMIC , Filters , 3 1/2 exsaust , Engine mods , it is possible but i had to get a re tune done which cost me about $1000 , it was done By HITMAN in penrith , if you ever have any problems passing your emission testing as in if you cant pass just take your car there and hell sort it out for you...

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4129395
Share on other sites

did the engineer do a noise test for the exhaust? or was it under 91db?

didnt get it engineered , problem solved though as i bought a varex muffler electronic silencer kit , when i get pulled over press of a button car goes quiet , so car can be as loud as you want but press of a button makes it so quiet , good for neighbours and stuff..

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4129815
Share on other sites

ahhh k , yes was also looking into this for the exhaust. just a bit pricey atm. where did you get yours done at?cheapest i have found is $400 of boost (the muffler that is)

I Got it fitted wired everything it was about $550 bucks which is reasonable price , Place called WESTERN MUFFLERS Hes on fairfield St In Fairfield . he does alot of work on my R34 GTR ....

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4130119
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...