Jump to content
SAU Community

Recommended Posts

Item:

Skyline R34, 99 Model, GT-T, 5-Speed manual

Location:

Gold Coast

Reason for Selling:

Making Way for new ride,

Price and Payment Conditions:

$25,000, will lower without wheels.

Sorry not after swaps either,

Extra Info:

Looking at selling the 34, as I have my RX7 FD out of the build and this car hardly gets driven as I have another daily.

If I don't get right price, it will be kept as another daily, however its abit of a waste as another daily.

Some general specs, alot of others that cant come to mind at the moment:

SSR Wheels Fronts 18 x 9.5 Rears 18 x 10

Full Impulse Bodykit,

Tanabe Type R Coilovers

Hybrid Intercooler

Apexi pod filter

Greddy Turbo Timer

Blitz Icolour boostcontroller

8000k H.I.D's

C-West Carbon Fibre eyelids

Nismo Short Shift kit

Nismo Gear knob

Full C.E.S Exhaust with high flow cat,

C.E.S Dump pipe and manifold,

Interior has been retrimmed front and back, done tastefully without being over the top.

Audio

Pioneer Type R 12inch sub

Pioneer Digital amp (cant remember model name)

Type x DDliner splits, front and back

Pioneer Dvd player

DDL Dvd screens in both drivers side and passenger side

Pictures:

IMG_2395.jpg

IMG_2281.jpg

IMG_2669.jpg

IMG_2746.jpg

IMG_2383.jpg

Contact Details:

PM me or contact me on 0421 320 526

Got lots of other pics if needed.

Link to comment
https://www.sau.com.au/forums/topic/263855-skyline-r34-yellow-gt-t/
Share on other sites

Beautiful machine... hope it goes to a good home!!

cheers, would love to keep it within the sau family, Would love to see someone finish it

Bump

Edited by HKS_R34
  • 2 weeks later...

hey man,

I also own a R34, looking at a kit for it. Impulse looks lovely. Can you send me a few more pics of you car , that would be really swell.

[email protected]

cheerz brus

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
    • OK, now we are ready to get started. You need to remove the air boxes on each side for clearance. The cover is straightforward, undo the clips on the top and lift the front cover out of the rest of the housing. If it is tight you can remove the air filters first. The rear section of the airbox is trickier. On each side you need to remove the Air flow meter wiring which is held to the airbox with a clip; you need to get behind the clip on 2 sides if you want to remove it without breaking it - unclip the harder side and pull on the clip with medium force, then unclip the easier side and it should pop out The airbox is held onto the intake hose with a spring clamp; you need to get a flat bladed screwdriver behind the spring on both sides and pop them outwards. When you have got them in the right unclipped place they will stay there and the airbox slips out pretty freely. Put a rag in the intake to prevent anything getting dropped in there, and also to prevent you seeing that the turbo seal is leaking oil (as they do). Then. The top of the radiator is held by a steel plate, it is secured by 2x10mm and 2x12mm headed bolts . Remove them and remove the plate Also grab the bushings that hold the radiator to the plate on each side so they are not lost!
    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
×
×
  • Create New...