Jump to content
SAU Community

Recommended Posts

hey guys my dreams got shattered today after trying to fit these onto my r33 gtst after just buying them at the start of this week. fell in love with the look and the rareness of these wheels! the rears were awesome and they stuck out of the guard just a tad just how i liked but the fronts did not fit due to no clearance for the caliper!!!!!!!!

i got these from jms in adelaide and they told me they came off a r33 skyline so i had no problems but they were obviously wrong and i'm not happy at all!!!! :)

i have to sell them now as i don't want to run spacers or anything. offset is unknown as it doesn't mention anything at all on the rim except for manaray, jwl and size. the rears though seem to be around the +30 mark and front within +38 to +30.

if you are interested bring your car around and we'll test fit the fronts on and if they fit they should be o.k. this is considering you dont have a 33 and have small front brakes. have a feeling they could fit on a soarer or fc pretty well. if you have a r32 i am pretty interested to see if they would fit on the front as they mentioned it would fit a skyline but they might have meant r32 and not r33.

*edit* the rears come with screw on/screw off spacers that actually bolt onto the wheel on the back of where the rim sits on the hub. its just under a cm.

specs are:

front 17x8.5 with crap 245/40R17

rear 17x9.5 with crap 245/45R17

the wheels are old but they are in good condition for the age. if you want show rims these arent it. they have a bit of gutter rash, some scratches but overall very good and still shiney condition. they have the centre caps and everything. give them a bit of a clean and they will look great like what they first looked like when jms got them in the picture. (picture is of the actual rims)

want $850ono and i don't want low ballers cause i love these rims. will swap for anything of interest. need these gone asap so i can get some new rims. pick up in western suburbs of vic or will send interstate but at ur own cost. call/msg me on 0432454387

20070605160108.jpg

Edited by jakez88

dude just keep them and run a 15-25mm bolt on spacer, too easy and safe, or even a 5-8mm slip on depending on how far off they are.... or as heaps of people do, file your calipers down a bit, you can take quite a fair bit

i think i might have to run spacers if no one wants to take them off me. gonna have to harden the fk up lol but i'll see how i go with the sale first.

mattysaidso the wheels are at japanese motorsport in adelaide or JMS. the wheels ur after are manaray vr5s but i don't htink they have em anymore.

i'm trying to source out a 20mm bolt on spacer for my fronts and new lug nuts as the standard nuts won't allow me to stick the socket in. clearance is to small. if someone wants them though and for the price i'm asking then i will sell them otherwise my adventure of getting these fitted on the front of my car starts now lol.

pms replied guys. no low ballers please. anyone interested?

i have put the bolt on spacers from the rear to the front and they still dont clear my 33 calipers BUT could most likely clear r32s as there is only a few mm needed to clear. any 32 owners taht are interested and wanting to test fit are welcome.

Edited by jakez88

alrighty these wont fit a r32 as i tried with a friends and didn't fit. need about a 15mm spacer or jsut go 25mm.

measured up as best i could the offset and they seem to be fronts +45 and rears about +38 so definately suitable for a soarer, supra or chaser etc that run high offsets. best to fit up before purchase though.

anyone have a soarer or supra? or if your a hard kunt and wanna run spacers on the front then buy them. $800 guys or throw me an offer.

Edited by jakez88

they wouldn't fit because of the calipers unless you use spacers up front

Edited by jakez88

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...