Jump to content
SAU Community

Recommended Posts

up for sale is a one of a kind original vl calais.with a rb26 turbo motor.this motor has been fully rebuilt so its a brand new motor.got forged pistons,new rings,bearings,seals.head and block machined,apexi head gasket witch cost $900 alone.everything in this motor is all new parts from top to bottom.the motor owes me $13000 alone!no money has been spared on this hole car.top mount manifold with 50mm waste gate,gt45 turbo 500cc injectors,comes with standerd fuel rail,After market fuel reg,bosch 044 fuel pump,microtech mtx 12 aftermarket computer,comes with standerd cam gears and standerd timing cover,new coilpacks,new aftermarket clutch and flywheel,aluminium radiator,new thermo fan,new brake master cylinder.front mount intercooler,also chromed intake plenium and rocket covers. all the interior is done.also a 6point roll cage has been installed.the paint job is brand new paint job alone coast $8000 alone its candy apple red awsome colour.brand new 19 inch chrome rims with brand new 265/20 tyres all round.4inch exhaust dump pipe to 3 and half inch to a dumpy be4 the diff.it has a reshimmed lsd turbo diff.all new rotors with slotted on front.all parts on the body work are brand new.new front lights,new tail lights and centre piece between tail lights,all brand new chrome strips and door handles.all new windows.every thing on this car from motor to body in brand new.this car has had over $40grand spent on it easy.and have all receipts for motor parts and computer and other stuff.i took it to power cruise to run the motor in and only done 4 laps so still needs to be run in then will need a final tune as its a new computer witch has only been pretuned for an rb26 to run the motor in.this motor has been built to run an easy 400kw at the wheels.there is probably heaps that i have missed.this is the best and neatest vl calais you will find with a rb26 in a vl.this is a very regretfull sale but i have to sell as i am buying a house otherwise i would keep this for sure.it was a project witch i have finished.all it needs rego and your set.this will make it in street commodores easy as i regretfully havent got around to it. NO TIME WASTERS PLEASE.PRICE DROPPED FROM $20.000 down to $17000 must sell. 0401529839 NO TIME WASTERS.if dont have money dont ring.thanks the car is in nsw at forster/tuncurry the car is also forsale on ebay for same price.thanks may swap for a nice r32 gtr.

post-25084-1243915268_thumb.jpg

post-25084-1243915339_thumb.jpg

post-25084-1243915358.jpg

post-25084-1243915393.jpg

post-25084-1243915402.jpg

post-25084-1243915410.jpg

post-25084-1243915419_thumb.jpg

post-25084-1243915425.jpg

post-25084-1243915433.jpg

post-25084-1243915445.jpg

post-25084-1243915457.jpg

Link to comment
https://www.sau.com.au/forums/topic/272836-vl-calais-rb26motor/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...