Jump to content
SAU Community

Bride And Recaro Seats + Bnr34 Seats With Rails For Your Skylines! Not Only Comfy But Look Awesome Too


Recommended Posts

Hey guys,

Not only these GENUINE Bride and Recaro seats look good they also offer great support and hugging when if you decide to go sideway. :D

We also have rails for these seats to suit Skylines. They are in very good condition :D

Bride Brix II

$900 (ETA Nov)

We have brand new bride RX rails to suit Skyline R32-R33-R34 4WD (don't have rails for ER34)

BrixII.jpg

BrixIIB.jpg

Bride Brix 1.5 Red

Very good condition no rip

$800 each

Brix10.jpg Recaro SR3 Black - Excellent condition

No rails $1350

With Recaro Skylines rails $1600 (ETA Nov)

With Silvia/Skyline/Supra rails $1600

SR3Black3.jpg

Recaro SR4 DC5R Seats with rails $1800

With EK9 or DC2R rails $2000 (ETA Nov)

With Silvia/Skyline/Supra rails $2000

SR4Red.jpg

SR4RedC.jpg

Recaro SR3

No rip - excellent condition

$1250

With Silvia/Skyline/Supra rails $1500

SR3.jpg

Bride Brix Black 1.5

2 in stock

$800 each

Brix1.jpg

BNR34 Seats with Rails V Spec

$2350

BNR34Seat.jpg

Bride Rails for R32/R33

$350

R32Rails.jpgGenuine Bride Rails R34

$400 Pair

BrideR34.jpgRecaro SR3 Rails for R32/R33

$400

RecaroR32.jpg

R34 $400 pair

RecaroR34.jpg

For a good deal on these beautiful seats with rails please feel free to pm or call me on 0422 422 344.

Cheers,

Thuy

  • 1 month later...


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...