Jump to content
SAU Community

Bride And Recaro Seats + Bnr34 Seats With Rails For Your Skylines! Not Only Comfy But Look Awesome Too


Recommended Posts

Hey guys,

Not only these GENUINE Bride and Recaro seats look good they also offer great support and hugging when if you decide to go sideway. :D

We also have rails for these seats to suit Skylines. They are in very good condition :D

Bride Brix II

$900 (ETA Nov)

We have brand new bride RX rails to suit Skyline R32-R33-R34 4WD (don't have rails for ER34)

BrixII.jpg

BrixIIB.jpg

Bride Brix 1.5 Red

Very good condition no rip

$800 each

Brix10.jpg Recaro SR3 Black - Excellent condition

No rails $1350

With Recaro Skylines rails $1600 (ETA Nov)

With Silvia/Skyline/Supra rails $1600

SR3Black3.jpg

Recaro SR4 DC5R Seats with rails $1800

With EK9 or DC2R rails $2000 (ETA Nov)

With Silvia/Skyline/Supra rails $2000

SR4Red.jpg

SR4RedC.jpg

Recaro SR3

No rip - excellent condition

$1250

With Silvia/Skyline/Supra rails $1500

SR3.jpg

Bride Brix Black 1.5

2 in stock

$800 each

Brix1.jpg

BNR34 Seats with Rails V Spec

$2350

BNR34Seat.jpg

Bride Rails for R32/R33

$350

R32Rails.jpgGenuine Bride Rails R34

$400 Pair

BrideR34.jpgRecaro SR3 Rails for R32/R33

$400

RecaroR32.jpg

R34 $400 pair

RecaroR34.jpg

For a good deal on these beautiful seats with rails please feel free to pm or call me on 0422 422 344.

Cheers,

Thuy

  • 1 month later...


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...