Jump to content
SAU Community

Vic 93 Hcr32 Gtst, Manual, 180rwkw On Low Boost, 11months Reg. New Ku36's

_Ryan_

By _Ryan_,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

_Ryan_ Grand Master

_Ryan_

Posted
  • Author
Posted

I have moved and have NO space for a second car. Any offer with CASH behind it will take the car.

unsure of what the diff actually is.

_Ryan_ Grand Master

_Ryan_

Posted
  • Author
Posted
Willing to part out anything in replacement for stock parts?? let me know...cheers

No thanks. Why not pick up the car cheap and part it out?

Rowdyr32 Mentor

Rowdyr32

Posted
Posted
I have moved and have NO space for a second car. Any offer with CASH behind it will take the car.

What do you want for the car. I have plently of cash waiting.. Please reply to the pm.

Its been for sale for 9 months now... What is cheap?

_Ryan_ Grand Master

_Ryan_

Posted
  • Author
Posted
What do you want for the car. I have plently of cash waiting.. Please reply to the pm.

Its been for sale for 9 months now... What is cheap?

been up for sale but not keen to sell it until now ;)

Havent gotten a PM, but sending you one now.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...