Jump to content
SAU Community

Recommended Posts

Yea not going to have much luck with that as they are illegal to own or import in any other state except NSW and QLD class A , B or H wepon so that also means you need to have a firearms licence and the red muzel cap must be left on.

Also all automatic airsoft guns are banned in all states and that goes for military replicas too..

Here are the Laws per state. (taken from Australian Airsoft Council Website)

New South Wales:

All replica or imitation firearms are classified as prohibited firearms and it is illegal for an individual to own or possess one in NSW without the authority of a permit, and permits for prohibited firearms are restricted to people and/or organisations who have a specific purpose, for example Theatrical Armourers. NSW Police Ballistics Unit have classified the Airsoft range as prohibited firearms due to their similar appearance to actual firearms.

Queensland:

Airsoft replicas that have automatic firing and/or similar appearance to prohibited automatic military style assault weapons or machine guns are prohibited to own or possess. Other single shot and semiauto airsoft replicas are classed under License Categories A, B & H.

South Australia:

Airsoft firearms that have a velocity 1 metre from the muzzle of under 180 foot per second are not firearms in South Australia hence not restricted. Airsoft firearms above 180 foot per second 1m from the muzzle are firearms and depending on calibre for long arms will be either an A or B class firearm. Hand guns are H Class.

Victoria:

Airsoft articles are not permitted in Victoria under the Victorian Legislation and Victoria Police will not issue any authorisation for their importation.

Western Australia:

Airsoft articles are not permitted in Western Australia and Western Australian Police will not issue any authorisation for their importation.

Currently single shot spring powered airsoft guns commonly referred to as sniper rifles (that do not replicate automatic weapons) and gas powered hand guns (without automatic function) may be (technically) imported into some Australian states, such as Queensland. To own, possess or import these devices one requires appropriate license/permission from the weapons licensing branch of each state, and to gain such license/permission, one requires a "genuine reason" among other things. Airsoft is not considered a genuine reason because a) there is no such sport and b)no range will permit the use of airsoft guns anyway. So practically there is no way to own, import, possess or use an airsoft gun in Australia.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...