Jump to content
SAU Community

Recommended Posts

Hey guys its come time to sell my Golf Mk3 everdayer. Its done me well. Iv only had it for around 10 months or so. Body is excelent for a 93 model car, had 36,XXX ks on the clock (cluster was replaced when new engine was built for the car) does great milege. 2 weeks driving (almost 500km) for 40 bucks. Never misses a beat, runs perfect, taken care of. The only owner before me was my uncle and grandfather (my uncle built the engine).

Reg till Oct 11.

Specs: 94 VW Golf GL (rego sticker sais 94)

manual

2.0LTR SOHC injected

Power everything (windows, mirrors, steering) also has ac and heater, everything works

Rodney jane racing rims 15inch with perelli tyres

full roadworthy condition

JVC headunit, Cadence 3way 6" speakers Kenwood sub and amp.

Central locking with remote keyless entry

Only downside to the car is there is a chipped tooth on the reverse gear and it makes a ticking noise while reversing. Still works fine, its a common problem with these cars.

Anymore questions? dont be afraid to ask.

PH: 0421 986 981 - SMS and Calls welcome.

41008_10150252583895176_807030175_14608250_2945432_n.jpg

58984_10150252583940176_807030175_14608252_3525499_n.jpg

57978_10150252583970176_807030175_14608253_7731135_n.jpg

46645_10150252583995176_807030175_14608254_5490012_n.jpg

59047_10150252584060176_807030175_14608257_3093754_n.jpg

58514_10150252584095176_807030175_14608259_6536902_n.jpg

$6,000 ONO. Will considder reasonable offers.

Edited by LTHLRB
Link to comment
https://www.sau.com.au/forums/topic/349942-fs-93-vw-golf-mk3-gl/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...